I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"
I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"
COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
Similar Messages
-
I have a Toshiba external HD that I used with my old 2008 MBPro with no issues. I just got a new MBAir, and when I try to use the same Toshiba HD it will not allow me to write to the drive. The drive mounts and I can open files from it, but when I look at the info under Sharing & Permissions it says "You can only read." I'm not able to Verify it in Disk Utility either, as when I open it there all the Verify buttons are greyed out.
I also noticed the drive format says Windows NTSF, which I don't understand since I was using it with a Mac before and have never used it with a PC. Do I have to reformat it to write to it from my MBAir? I have files on there that I don't want to lose, and the only PC I have available to me is at work.http://support.apple.com/kb/ht1274
-
My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony
1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422] -
hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.
-
Someone gave me a airport express router. it works great with my macbook but when i try to connect via wifi to my iphone it says it can't be set up by "this software". Where can I download whatever software my iphone needs so I can get wifi?
Per chance is your AirPort Express Base Station (AX) an 802.11g model? If so, that is why you are getting this error message from the AirPort Utility running on the iPad. You would need to use either version 5.6 or 5.6.1 running on a Mac or a PC to administer this base station.
-
i have music i have put on itunes from cd's i won but when i try to play it or update my ipod it says cannot find file and have to locate it why is this
Because the file are no longer where they were when they were imported into your computer and added to your iTunes Library.
Did you move, rename or delete the files after adding them to your iTunes Library?
Do you use any other programmes, which may have moved, renamed or deleted the files, for example, Windows Media Player?
Were the files added to your computer's hard drive, or to an external drive which is no longer connected, or has a different drive letter now? -
we need them in itunes so we can play them via Apple TV unless there is a way to play them through Apple TV without putting them all in itunes, but i don't think there is.
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I can use one of my skullcandys but when i try to use the other pair it works for about 20 or so seconds before it will fade away
Make sure the plug is pressed in all the way. The fit seems to be different for different brands, so with some headphones, it takes more pressure to insert the plug completely (including Apple's recent EarPods). If the plug is not completely inserted, you may hear something, but the shuffle does not "see" the headphone so stops playing after a short period.
-
When in the ITunes Store to redeem a free song; I am prompted to sign in to redeem code. I proceed in to sign in and a reply message; my apple id has not yet been used with the ITunes store. Please review your account information, as I click to review, it sends me back to the Itunes store.
I don't know what else I need to do. If anyone has helpful suggestions, I would appreciate it. ThanksYou can create a iTune and App Store account without credit card details
1. Sign out of current Apple ID
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (must be a valid email address)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
Please show me step by step how to activate Facetime.
I'm from Mexico City. According a table, Mexico is available for Facetime calls. Thanks for replying!
-
i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service
Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me. -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, RicPrintopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions -
How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?
Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.
Maybe you are looking for
-
Extraction of datasource 0HR_PA_1 delivered no data
hi folks, i have a problem with extracting data from datasource 0HR_PA_1. I implemented the HR BI content for PA in a standard way. everthing works fine except datasource 0HR_PA_1 that means in detail that I get no data records from R/3 althrough the
-
Preview doesn't show JPG files
I keep having problems viewing JPG files in Preview. The image displays in the Finder, it displays in the thumbnail view for 'Downloads" and it will even appear in the sidebar for Preview if I choose to show the sidebar, but it does not appear in the
-
Oracle giving Block corruption errors when using CDC for sending the data to SQL Server 2012
Hello Friends, We are facing an error while using CDC with Oracle. It is a "Block corruption" error, which indicates at some level of data corruption. We ran RMAN validate command to scan the database for corruption but it returned with no errors, ho
-
Urgent: XSQLRequest Usage in Stored procedure
Hi Steve, I have developed a java stored procedure and published it as required to be called from a trigger.My java code uses XSQLRequest to read the .xsql page. Earlier i was not able to resolve the java code which i had written but some how i final
-
RP(Returnable packaging) account and transaction details
Hi All experts, could any one of you let me know the correct table to find out the followings: 1. RP(returnable packaging) account header details. 2. RP account item level or transaction details like opening balance, closing balance, bill of lading,