My isight camera stops working just after i updated to mountain lion 10.8.1 on my macbook air 2012. any suggestions!

No camera related applications are working, such as facetime, phone booth and skype..

Upgraded to 10.8.2. Lost my isight cam. Anyone got a resolution?

Similar Messages

  • Photoshop Elements 10 Stops Working just after start.

    I updated to the new insperation browser.  The ogrinizer starts but stops working just after the start.  I'm using Windows 7 Home permium.  It worked before the update.
    Doug Van Dusen
    [email protected]

    Try downloading and installing outside of the Organizer or Welcome Screen. Uninstall AIR and IB via the control panel. Then do ctrl+alt+delete and open the  processes tab in task manager. Highlight any running Adobe application or process and end it. Use the link below and it will install both IB and AIR.
    N.B. when using with Premiere Elements on Windows 64 bit systems, the inspiration browser needs to be installed in both locations C: Program Files/Adobe and C: Program Files (x86)/Adobe
    Inspiration Browser Get Update Now

  • HT1338 I just uploaded an update to Mountain Lion today mail no longer works

    I just uploaded an update to Mountain Lion today mail no longer works.

    After I ran theupdate yesterday I got a message that the update did not complete. When I tried to run mail I got a error message that mail could not run. When I rebooted and tried mail again I got the same error. I tried to load the last mail update from the apple store, but could not run it because it was unsigned.

  • My iphone 3gs stopped working and i tried to  restore it on itunes but it said a file was corrupt any suggestions?

    my iphone 3gs stopped working and i tried to  restore it on itunes but it said a file was corrupt any suggestions?

    What file did it say was corrupt? What error number? What is showing on your phone right now? What version of iTunes? What kind of computer?

  • I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

    I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

    Hi ..
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Back to Safari. Press Command + Option + E to empty the Safari cache.
    Quit and relaunch Safari, try a video.

  • I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    The only problem that I forsee is that some have reported problems getting machine-specific builds of Lion via Internet Recovery. Not sure if it's working yet or not. But you could give it a shot, I suppose. Basically what you want to do is 'prepare your computer for resale' - just like it came out of the box. Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and will paste below:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
        1.    Select Disk Utility from the main menu and click on the Continue button.
        2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
        3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
        4.    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Good luck,
    Clinton

  • I just made the update with "Mountain Lion" on may MAC. Now I am not able to open all my Word-Documents any more. What can I do?

    I just made the update with "Mountain Lion" on my MAC. Now I´m not able to open all my (old) Word-Documents any more. What can I do?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • After recent update to Mountain Lion, trash won't empty completely; says "item" inuse

    After recent update to Mountain Lion, trash will not empty completely.  Always an item left in trash, and I get message that the "item is in use." Right now, using app Trash it! to get rid of that left behind item.

    Try rebuilding Trash and see if that sorts it...
    Launch Terminal and copy & paste these commands:
    Go to /Applications /Utilities/Terminal and launch it.
    At the prompt, copy and paste this command
    sudo rm -rf ~/.Trash
    Press Return.
    You will be asked to enter your admin password. It will be invisible.
    Enter it and press Return.
    Log out and back in or restart.
    Let us know.

  • My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

    My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion...  Help!!!
    Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?   

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • ISight camera stopped working for non-Apple software after last OSX update

    I did the last OSX update last night and my iSight camera stopped appearing for Skype, Yahoo Messenger, and Zoom.us
    The camera is accessible to FaceTime and PhotoBooth
    I did a restore from time machine and the camera worked (the restore took 3 hours)
    Then I applied the update again and the camera disappeared
    Anyone else experience this?
    Thanks

    You're most welcome.
    If you get tired of waiting, the fix has worked for some. 
    Here is an example: http://discussions.apple.com/message/22984254#22984254
    Message was edited by: EZ Jim
    Mac OSX 10.8.5

  • Catalyst Control Center stopped working properly after widows update

    When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC. 

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7).  Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7).  Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • TS4002 I can't enable mail on icloud after i updated to mountain lion 10.8

    I just updated to Mountain lion 10.8, and I cannot get mail to enable on icloud. I also see a faint apple on the corner of my mail tab on my dock, what is goin on? need help!

    the same happen to me. after updating from snow leopard to moutain lion I have decided to create email on icloud.com.
    i have setted it up on ios devices with success but on my mountain lion mac i can activate icloud with contacts , calendar, browser, data, but not the mail service.

  • ISight camera stopped working!

    Okay, I've had my iSight for a few months now, and never really had a problem with the iSight itself. I just plugged it in to use and it doesn't work. My iChat doesn't show that I have connected a camera, and when I go in preferences to video, it doesn't show any picture at all. What happened? I've plugged and unplugged it a few times to make sure the connections were good. What should I do?

    Hello Steve,
    You can check your iSight using the tests and trouble shooting suggestions in the How To Ensure Your iSight Is Functional FAQ.
    If your iSight fails ALL tests see your Apple VAR or Service Technician to have it checked. It may be damaged. If you do not have local access to qualified Apple Service Technicians, see the iSight Service info links in the Where to Find Help for iSight? FAQ,

  • Wifi stopped working just after i upgrade ios 6.1.2 to 6.1.3

    Wifi stopped working since i upgrade ios 6.1.2 to 6.1.3. It's displaying wifi is connected but not receving data packet
    I searched to fix this problem and found many suggestion but no luck.
    Could you please help me to fix this problem.

    Hi Gunjan,
    Thanks for visiting Apple Support Communities!
    It sounds like you've already tried a few troubleshooting steps, but these links may offer some additional tips:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    If you are using a public or commercial network that requires a login or subscription, see this article for more information.
    Verify that you are selecting the correct network if you are in a location with multiple Wi-Fi networks.
    Verify that the Wi-Fi network settings are correct. You can view and configure Wi-Fi settings using the following steps:
    Tap Settings > Wi-Fi.
    Locate the Wi-Fi network you are currently using and tap .
    If you've verified that your settings are correct and the issue persists, try the following:
    Tap "Forget this Network" to reset settings for this Wi-Fi network, including the password. Then try connecting to the network again.
    Note: This can be useful if you identify a network issue and want to prevent the device from automatically using this network in the future.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including passwords, VPN, and APN settings.
    Note: If the Wi-Fi network uses MAC address filtering, you will need to add the MAC address to the access list for the Wi-Fi router. The MAC address for your device is listed as the Wi-Fi address in Settings > General > About.
    If this issue persists with multiple wireless networks, see our general iPhone Troubleshooting Assistant for more steps you can try:
    http://www.apple.com/support/iphone/assistant/phone/
    Best,
    Jeremy

  • Every time i plug in a USB mouse, the isight camera stops working

    The problem is that whenever i plug in a USB mouse to say, game, the Isight camera is disabled and is "being used by another applcation" and this problem continues until i log off and back on or i restart. I am running a apple magic mouse for other uses and is normally still connected when this happens, but i tried disabling it first and plugging in the mouse and same issue happens again. any help?

    I also figured out that if i plug in some combination of things, such as the mouse and an ipod, the camera comes back. any ideas?

Maybe you are looking for