My Itouch died & now it just has a white screen when I try to turn it on
My Itouch died and when I plugged it into a friend's computer to charge it, it just has this white screen when I try to turn it on. I took it home and plugged it into my own computer, and it's doing the same thing.
What can I do to fix this?
I wish i was replying because i could help. I just wanted to reply because my pod did exactly the same thing. except now it turned off and will not turn back on.
Similar Messages
-
Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?
this usually means the software and hardware can't find each other for whatever reason the following article addresses this issue:
http://support.apple.com/kb/TS1440
can also do apple hardware test, following article on that:
http://support.apple.com/kb/HT1509
if you can't access the apple hardware test in the above article you can also do fsck command to check the hardware as well, following article tells how to do that:
http://support.apple.com/kb/HT1782
hopefully one of these articles helps w/ resolution!! -
My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.
pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
HT201210 ipod just has a white screen
ipod touch just has a white screen. Can't even get to unlock screen
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ny ipod touch will not do anything. it just has a white screen on it. plz help!
- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order. -
my ipod fell in the toilet and i dried out all the water it has no water in it now, but it has a white screen that will not go away what should i do ?
Did you dry it is rice for a week and change the rice daily?
How to fix a wet iPod or iPhone | eHow.com
If yes then try the white-screen topic here:
iPod touch: Hardware troubleshooting
If still not work your iPod requires service. -
I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?
In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ -
It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X
Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.
-
I clicked on the software update, acted like it was updating, and now it just has a blue/turqois screen. I have tried to reset it by holding down the on/off button
and home button at same time, and the apple logo shows up and them goes back to the same screen. Please help...Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Itouch will not turn on just has blank white screen
i have an itouch when i try to turn it on i just get a white display
Let the battery fully drain. After charging for an hour try:
- A reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- The connect to computer and restore via iTunes if necessary. -
I completely reset and now it has a black screen showing a plug in pointing to itunes. what should i do?
That iPad is probably in recovery mode:
http://support.apple.com/kb/HT1808
But it won't be much use to you, if you don't know any passcodes.
In that case, you should contact Apple.
By mail...:
http://support.apple.com/kb/HT5312
...or by phone:
http://support.apple.com/kb/HT5699 -
I don't really understand what's happening, but I tried to update the software. Then all these codes appeared on the screen so I help down alt, command and R and it then reset and now it's just a white screen with a flashing file and questionmark. Please help.
That is a sign that the MBA cannot locate the OSX. The storage drive may be damaged.
LaurenDavie123 wrote:
I help down alt, command and R and it then reset a
What exactly did your reset?
Ciao. -
My MacBook Pro has a white screen when I turn it on
When I start up my MacBook Pro. It just ha a plain white screen and I can also hear a faint beeping (like if you were on a desktop computer holding down a lot of keys on the keyboard) please can someone help me!!??
I can tell you what I did the last time this happened to me:
I made a careful note of my Display settings when my computer started up correctly and everything looked fine
... and, I ensured that the same settings were there the next time I restarted (and it happened that my screen didn't appear to display correctly) I checked these settings. If they had changed, I chose the one that 'worked' for me and it 'set' thereafter. In my case, it was 1280 x 800.
If I were you, I wouldn't shut down my computer too often (just telling you what I do.) I shut down mine only after a week or 10 days so that it can 'clean itself up.'
Hope this helps.
RS -
My hp laptop has a white screen when i turn it on,
have a totally white screen,has windows 7 installed on it,plz help
According to the message you have recently posted I would like to confirm that this could be a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP
Maybe you are looking for
-
How to do Translation of Lables in Internet Service
Hi, I have created an internet services in SE80 and write the code which is showing some labels on the output screen. Now I have to do the translation in Spanish Language for the lables maintain in english. Please tell me where I have to do this tran
-
How check double entries in Alv_grid OO considering the deleted rows
Hi, I've realized an ALV_Grid that show the contents of a custom table to allow the users to delete and insert data, checking that there are not duplicated keys. This is the problem: if a user delete a row and then insert it again (with the same key)
-
Is there a version of flash player that works on windows mobile 6.5?
Hi, Forgive me if this question shows my ignorance but is there a version that can be installed that works with wm6.5? When I visit web pages on my device that have embedded flash content I am advised that I need to update my version of flash player
-
SCCM Console on Secondary Site 2012 R2
Hi all, I just want to ask whether it is supported or not when install SCCM Console on Secondary Site Server in 2012 R2? I've searched over internet but does not find a conclusion about that. From technet SCCM Console requirement and interoperability
-
Hi, can anybody tell me if there is a method to get the hardware specifications of one machine, such as the Processor, ram, hard drives, and others