My itunes tv starts and stops like a freeze frame. How do I fix it

My itunes TV show starts and stops like a freeze frame. how do I fix it?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
When you repost, be sure to post details - your computer model, operating system, and iTunes version - so that people have information on which to base suggestions.
Regards.

Similar Messages

Why is itunes randomly starting and stopping?

I am running itunes on an iMac running MacOS 10.6.8. itunes is randomly starting and stopping. If there a fix for this?

I am having the same problem. I have recently bought and now use a track pad on my iMac. Also, I bought an app, rowmote that turns my iPhone as a remote.

I am trying to free my mac book for space. everytime i try to empty the deleted items in trash, it starts and stop without clearing the items. how do i empty the trash

I am trying to free my Mac book for space in oredr to upgrade. Everytime i try to empty the deleted items in the trash, it starts and stops immediately without clearing the items. How do i achieve this?

I had the same problem yesterday with an application file that was deleted after installation of an update. I used "Put Back" to move it back to its original location, then used "Show Package Contents" to delete/empty trash for small groups of files at a time. I suppose the application file itself may have been too large to empty at one time. I hope this helps.

Download ed videos start and stop then just freezes and

There are no more.details. that's it

If freezing while downloading?
Try with Firefox Beta versin
*https://play.google.com/store/apps/details?id=org.mozilla.firefox_beta

Installed iTunes 10.5 on Vista. iTunes continually launches and won't stay closed. How can I fix this problem?

I just installed iTunes 10.5 on my Windows Vista laptop. Now iTunes launches itself about every 60 seconds on my computer. I close the application and 60 seconds later it reopens. Any ideas how to stop this?

Had the same problem (as have a LOT of others).
Took the following action which (knock on wood) seems to have solved it!
Plug in iPhone; when Sync starts, click on "iPhone" under Devices; click on "Summary" page; under Options at the bottom of the page, uncheck "Sync wiyh this iPhone over ..."; click apply; exit after sync is complete......my problem disappeared!
Note: if the box is already unchecked, try checking it; apply; uncheck; apply
Good luck!

I have 0 songs in my iCloud/iTunes Match account and it says exceeded limit. How do I fix?

Hard drive crashed and when I loaded my local songs back into iTunes it wouldn't recognize my library. So I deleted all songs from iCloud to start anew. Now it will not allow me to add anything into my iTunes Match account. I have deleted the library, loaded an empty one and then reloaded the songs after cleaning out iCloud of all playlists and songs. I am at wits end. Help.

Hi,
Delete around 1,000 tracks so that the limit is reduced below 25k.
Hold shift key whilst turning off match. Close iTunes then reopen. Turn on match, you will be asked to add this computer, do so. The process may take sometime but if tracks had need previously matched or uploaded, the process will be quicker that a complete new scan.
Once scan has completed, check that the tracks have been matched, uploaded or purchased. Create a playlist based on iCloud status being matched or uploaded. This will tell you the total number of tracks that count towards the 25k. You can now think about readding the deleted tracks.
If you go over 25k non iTunes purchased track again, you can use the second library method to manage your main library. When you delete a track from the cloud it does not delete it from your computer. When you go back to your main library you will see the iCloud status as "Removed". Match will ignore in future scans.
Jim

I have updated to a new windows computer, and after transfering itunes library via iphone, the app section of itunes is locked and I cannot access it. How can I fix this?

I have updated to a new windows 7 computer, and after transfering my itunes library via iphone, itunes has locked me out of the app section of my phone. I can not add or remove apps using itunes. Is there a way to fix this? I have authorized, deauthorized, restarted, rebooted, and reset both my computer and iphone. Anyone got any ideas?? Thank you!

The safest way to do this would be to copy your itunes library to an external drive. For the purposes of this excersize the new Laptop would be the external drive
Here is the support article
http://support.apple.com/kb/ht1751
Then you could erase the iPhone and resync it without losing any content.
If this option is not open to you then this article contains ways to get your content off your iPod
https://discussions.apple.com/docs/DOC-3991

The "Enter" key keeps starting and stopping itunes songs...

Hey, everytime I hit the enter key for example in Safari to enter a webpage, my itunes songs keep starting and stopping like I have the itunes window active... Does anyone know a solution for this? I tryed reinstalling and no luck...
Thanks

What are the system specs for your pc? It seems it's to slow to play iphone's 720p HD videos. QT 7.7.3 is the latest for windows but VLC Player will play these videos too.

Itunes is stuttering -starts and stops at random intervals

Hi there-
I have a 5yr old emac. I am running OSX 10.4.8 and itunes 7.02. I have not had any problems for 5 years,
Today my itunes started stuttering - it starts and stops at random intervals and it takes forever to start playing again, to shuffle songs, etc... I restarted and it did not help.
Can you advise me on what I could do next?
Thanks so much,
Kathleen in Minneapolis

Kathleen ~
It's possible it could be one of several or combination of many things. I'll list the potential problems, and ways to determine if you have the problem.
First off, restart and do not run any other applications when you run iTunes, and don't run any applications after iTunes is playing music? Does the problem go away? If so, you may not have enough physical RAM installed on your computer for uninterrupted playback. You can find out how much RAM you have installed by clicking on the blue apple icon in the upper left corner of your screen and selecting "About this Mac". The "Memory" line wil display how much physical RAM you have installed. If it is less than 512MB, you should consider getting more.
My second assumption is that you state you have had the computer for 5 years, it is posible that the hard drive (HD) is getting low on available space. Adding music, email, pictures, downloads, etc. over time erodes away at the available space on your HD. Typically on this vintage computer it likes to have at least 20% of HD free space to work relatively efficiently (this will vary based upon how large your HD is to begin with).
To find out how much HD space you have available, click on your HD icon on your desktop once, then press and hold the CMD (open Apple) key and press the "i" key. You will see two statistics, "Capacity:" and "Available:". If the amount of available space is less than 20% of your total HD space you may want to consider removing things from you HD, acchiving things, or optimizing you HD.
How often you repair permissions? I recommend at least once a month, and it's relatively easy and a quick thing to do. Go to your Applications->Utilities folder on your HD. There is an application called "Disk Utility", double click it. Select your HD volume in the upper left corner, then click the button "Repair Disk Permissions". Depending upon how many programs you have loaded this could take several minutes, be patient. When finished, if it fixed any permissions, run it again! Yep, twice, just to be certain, it can never hurt.
Also, while you're in that application, and done with repairing permissions, click the "Verify Disk" button. This may also take several minutes. When done it should report if it thinks your drive is ok, or not. If not, you need to repair it, and in order to do so, you need to boot from another drive (either another physical or logical drive), so that you can attempt to repair it.
If you have the purchased utilities such as Disk Warrior or TechTool Pro you can repair disk and directory problems, which could also be causing your problems. A free utility, such as Tiger Cache Cleaner has some utilities to clean caches, and run your nightly, weekly, and monthly processes that may also need to be run.
Chuck
PB Ti 1GHz - The last of it's kind Mac OS X (10.4.8) et al

Report on active sync actions (like starting and stopping the sync)

Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
Thanks!

Hi Smit,
I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
Well ... earlier, options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
Regards,
Shiraz Anwar
I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach.

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

GarageBand '11 - Create an iPhone ringtone - Apple Support

Music starts and stops during playback of burned DVD

I really need help with this problem...I made a slideshow and added music from itunes in the program IDVD. Once I burned the DVD the music will start and stop throughout the DVD and not at chapters as I read in other threads - but in random places on the DVD. The DVD sounds like it gets hung up and then starts again. This is my first project using IDVD, so any help would be great.

Debra,
Do your project have music purchased from iTunes? If so, that could be the cause of this problem. Music from iTunes is DRM-protected and can cause problems in playback. To take care of this, first burn all of your purchased music to a CD, then reimport in an aiff format. To do this, in iTunes, go to iTunes>Preferences>Advanced>Importing. Look for "Import using", and use the drop-down menu to select AIFF encoder.
Good luck.

My ipod nano 7th gen. won't save the changes I make to a song's start and stop time. How do I fix this?

So I have a few songs that I don't like the intro to or the end of it that I had cut to where I wanted on my previous ipod. When I try to do the ame thing with this one with the start and stop time, it will work for awhile and then randomly start and stop where it had originally. I have done it like 4 times now for some songs and I can't seem to get it to stick. Suggestions?

If you use the Sync feature in iTunes, then it needs to be done to the song in your Music Library, then synced with the iPod. If you do not use the Sync feature and are performing the changes to the song on your iPod specifically, then the setting may be getting overwritten when you drag the song that's already on the iPod back onto the iPod. It will overwrite all local settings for the song on the iPod with the settings in your library.
Try performing the changes to the song in your music library, and then dragging it back over to your ipod (or Sync your iPod if you use that feature). This will make sure that the setting are consistent in both your library and iPod in-case you were to ever overwrite the song once more.

Start and Stop Trigger using PXI-6120 and DigitalStartAndStopTrigger.vi not working :-(

Hello,
I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
my software as of now.
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.3.0.49152
DAQmx 8.6.0f12
Trad DAQ 7.4.4f7
before I updated I had the same problem but with the following versions:
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.2.1.3001
DAQmx 8.5.0f5
Trad DAQ 6.9.3f4
So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
Many thanks,
Mike

Hi Graham
I'm out of the lab today but I'll try and answer your questions as best I can...
1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
2) Does the program end after the stop trigger is implemented?
Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
3) Lastly can you give me the details of triggering method. Are you
using a digital train of users set digital pulses? how long is the
program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running and then toggle the line high, wait a couple of seconds and then toggle it low.
To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
Any ideas? and thanks for you help,
Mike

My itunes tv starts and stops like a freeze frame. How do I fix it

Similar Messages

Maybe you are looking for