My lab top,while browsing on internet site,got stucked. The cursor was not moving and I was unable to close down the laptop. Finding no alternative I just pressed and held the startup switch for a few seconds and got it closed but can,t restart. Help plse
I can not start the device after I shut it down by pressing & holding the start button. I took this measure because I was not able to force quit/shut down while on internet. The program was not responding and laptop got hot.. Any body help please....
Aarzu
If a SMC reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a FREE evaluation.
http://support.apple.com/kb/ht3964
Ciao.
Similar Messages
-
When I hover over the Bookmark Icon for a few seconds it won’t work but when I go straight to the icon and click on it, it will work. Running Windows 7.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fineI am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.
-
I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?
mishmumken is correct about the 99 slides. There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter. iDVD gets around that by renaming slide 100 back to 1 and goes on.
The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x. Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198. Then burn the disk image to disk with Disk Utility at the slowest speed possible. Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
my iMac os lion 10.7.4 has jerky videos. I've tried YouTube videos with Safari and Google Chrome and the spinning globe appears and the video stops for a few seconds. I can't watch the white house weeklky address because it stops and starts every few seconds. The software is up to date. Just bought this thing in February 2012. Can anyone help me?
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. Might also apply to new machines w/o AppleCare.
-
I'm conecting my Ipad to the computer to charge and it shows the charging sign for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?
Have you tried charging it with another known working USB sync cable? After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock -
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
Long click to select an alternate tool, the flyout freezes for a few seconds
When I long click to select an alternate tool, the flyout freezes for a few seconds before I can select a tool. How can I fix this? My only work around right now is to know the tool shortcut and then to cycle through it with shift+tool shortcut.
Thanks,
ZackSo I don't know what happened. This has been the case ever since I can remember, but today I got a wacom tablet and now the tablet and the mouse can use the sidebar as normal. All I can assume is that the drivers for the tablet fixed some preference list file error...
-
After purchasing an album 4 of the songs play for a few seconds then cut out
i purchased 2 albums off of iTunes and when i went to play the one album 4 of the songs play for a few seconds then cut out.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
When holding down the 'command' key for a few seconds, the Universal Access panel appears. How can I stop this?
It is a panel that pops up and the heading on the panel is 'Universal Access', it is actually just an image of a panel, you can't access it. I have checked keyboard shortcuts and none of them are assigned to the command key only
-
my IPad4 cannot load the
os. it keeps trying but always crashes out after displaying the apple logo for a few seconds. it keeps cycling in the effort to start but without success.my IPad4 cannot load the
os. it keeps trying but always crashes out after displaying the apple logo for a few seconds. it keeps cycling in the effort to start but without success. -
Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603. I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November - any ideas ?
Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Maybe you are looking for
-
Hi, I have an advanced table and depending on the value returned I am setting a link for the messageStyledTextBean. When I run the page it runs correctly but I am getting the below warning: Warning(88,26): method setUrl(java.lang.String) in class ora
-
Hi all, I'm trying to create a vendor sub-ranges for my existing vendor in vendor master data. I've tested it out in one server and everything work just fine. Now I'm trying to do it for a different server. Here is what I tried before: 1. In IMG, I'v
-
CS5 Design Premium Language Issue
I have the opportunity to purchase a European version of CS5 design premium. Their claim is that it does not give options for English, only Dutch. Assuming it is a legitimate package, can I download CS5 suite from the adobe website, and then licenc
-
BT and Java - Btl2Cap Connection (Mobile phone and Digital Pen)
Hi! First a short Introduction: For a project I have to stream data from Maxell Penit DP201(4.1) to a mobile device (over a midlet). Data Connection is built up over Bluetooth. My Questions are: Is btl2cap the right method for connecting digital pen
-
hi, i have a requirement , While creating Quotation (in VA21 create with reference) in inquiry field (in F4 help) it should show only OPEN Inquiries. for this i have created a Z search help and added to VMVA search help. In my Z search help I have u