My LG Lucid was dead yesterday and wouldnt charge. This morning the icons on the bottom of phone are blinking. Has anyone had this issue?
On Monday night the phone was fully charged. I shut it down when going to bed but did not plug in charger. Tues morning the phone would not turn back on and would not charge with any charger or outlet. I kept it plugged in overnight tuesday.... Wednesday morning I tried to turn it on and the icons on the bottom of the phone blink but phone doesnt turn on. What's going on here? i've had the phone less than two months!!
The blinking icons mean, the battery is too low to allow the device to power up. That seems to suggest to me your cable is OK, and so is the adapter (and outlet).
OK, I think the thing to try now is a replacement battery.
It might be that your battery just failed. Since your device is so new, you might want to go into a local store and ask if they can replace the battery, or get something off eBay or Amazon.
If you go to a Verizon Store to ask to have a new battery (more preferrable) have them verify operation in the store before you leave with the cable and adapter you have, but with the new battery. With a really depleated battery, that might take 10 or 20 minutes.
If another battery doesn't work, then it's probably the phone, and you'll need to have it serviced or replaced under warranty.
Similar Messages
-
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
The audio is coming through my speakers fine, but there is no image of the TV Show or Film. Has anyone else had this issue and solved it?
I had the same thing recently when trying to play a video held in my itunes movies folder on my Macbook pro, through the Apple tv airlink to watch on my TV. I could hear the sound play back fine, but there was no picture/video.
It then dawned on me that the 'Apple tv' box can only show 720p resolution, and I was trying to play back a full hd (1080) video. I converted my footage to 720 (or apple tv version), and it now streams and plays perfectly from macbook to AppleTV. -
i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.
Try this.
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
I updated my iPhone 5 yesterday and it replaced ios6.2 with iOS 6.1 has anyone had this problem?
You are confusing your iOSs...
Today iOS 6.1 was released... replacing iOS 6.0.2 -
I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac. I have purchased the dazzle and the specs seem to be for windows only. Has anyone used this product on mac?
I am not certain, but I believe there is a version of Dazzle for the Mac. However, it is not the route I would chose.
You really need a proper analogue to digital converter, like the ADVC110, to connect to your camera via the usual RCA cables, and to your Mac via firewire. -
my apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?
I solved that particular problem for myself (although I am running iTunes 11 under Snow Leopard on an iMac) by deselecting one of my Users Admin. privs. You see, I had two users w/admin privs & iTunes now plays nicely when there is only one admin.
Otherwise, I would keep getting stuck in an "infinite loop" of resetting passwords over & over and still iTunes was a mess - albeit on an intermittent basis which was absolutely driving me nuts!
I also think that firing up Safari and signing into my account @ apple first seems to help; providing that an apple cookie gets placed in my machine before I go to the iTunes store and enjoy surfing around there.
Anyways, good luck~ -
Just bought Mountain Lion from the app store on my Macbook Pro. In the middle of installion it froze up my computer saying that the installation failed,
It says my Hard Drive is damaged and cant be repaired. Has anyone had this problem? Im completely screwed...Thanks Apple!!Welcome to the Apple Support Communities,
I had a similar issue and it was an easy fix for me. First you need to log out of your account completely in the Mac App Store. Quit the application. Re-open the Mac App Store. Click log-in, enter your Apple-ID and password. Now when the screen pops-up that has all of your billing/credit card information on it DO NOT select done. Instead select View my Account, then select View hidden purchases. There you should be able to find iPhoto. Hope this helps if not let me know. I'm still searching solutions for you.
Connor -
Has anyone had this issue? There is a strange fine white powder covering anything plastic in my apartment. It's coming from my iMac. It's a year and a half old (out of warranty). After 6 months of trying to figure this out, I found out yesterday when my local Apple Sore offered to fix it for $700. I want to know how toxic this powder is, since I've been breathing it for 6 months. A carcinogen I'll bet.
If an Apple employee (repair tech) doesn't know what it is.............
Suggest that you do a Google search for the "guts" of your model/generation iMac. See what the "guts" are made of and post back your findings.
We are just ordinary users like yourself that help out here. I for one, would be very interested to know if your iMac has a "monkey on it's back."
Sorry, I couldn't resist. -
Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?
What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel -
My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this error code appear for them before and how were they able to fix it?
Thank YouSee SIMPLE easy solution for 1015 3094 3014 21 error
-
When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?
See "error -3259" here.
-
I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?
The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.
Maybe you are looking for
-
PLEASE HELP
-
Problem with german special characters in APEX
Hi, we have a problem with all the special characters in german language in our Application. APEX version 3.1.0.00.32 is installed on a oracle database 9.2.0.6.0 The nls_characterset of the database is: American_America.WE8ISO8859P1 We have modified
-
WS-C6509-V-E VSS Pair: Random ports going into err-disabled due to udld error
We recently (a few months ago) put two 6509s into VSS mode and had many teething problems. One of the problems we had was random ports on switch 2 of the pair came up in err-disabled mode after a reboot. We somehow fixed them by combinations of shut/
-
Vendor number field in 'IDOC_INPUT_CREDITOR'
Hi , I am using fn module IDOC_INPUT_CREDITOR for creating a vendor master in SAP. This particular fn module will generate a vendor master with a new vendor number as an information message. Can anybody suggest me which field be holding the new ven
-
Problems with MobileMe contacts sincyng
I'm a MobileMe, Mac and iPhone user and I usually sync all my data with no problem However for some reason I cant sync my contacts in my Mac with with my contacts in MobileMe. Also I find some of my contacts names overwritten with other names in Mobi