My Location is not working with GPS

My Location does not update when trying to use GPS or VZW Location but updates fine with Google Location services.  It's not a problem with locating (seemingly), but that the phone won't even recognize that an alternative location service (to Google's) is selected at all.  This occurs with Maps and Weather (don't use other geo locating apps).
Thoughts anyone?

kriegeritaville, I understand your concern. This can definitely be an issue when you are trying to locate an address and the GPS wont lock on to your location. It can be time consuming and frustrating. I performed some research in regards to your issue and found there can be many factors for why the GPS isn't working properly. Things that can be a factor are the area you located in, terrain, if your inside a building, software, or other applications on your device. Just like being inside can affect your call signal, this can be the same for GPS. If you search the internet, you will find that different android customers have noticed that when they have issues with the GPS, it is because they are inside or other applications are attempting to use the GPS for their location services. Sometimes other applications can interfere with the GPS locking on to your location. I'm happy your GPS still locates and directs you to the correct address but I do recommend removing apps your not using or turning off the location services for apps you don't need them for. All applications are different and you will have to go to the menu/settings to turn location based services off for those apps. YOu can also put your phone into safe mode, which temporarily disables all applications that have been installed via the Android Market. Performing this step can help determine whether a 3rd party application is the cause of an Operating System / Application issue. I listed steps below.
Steps to put phone into safe mode:
Press and hold Power button.
Select Restart.
Select Restart.
When the second HTC logo appears, press and hold the Volume down key+Optical joystick.
Continue to hold the Volume down key+Optical joystick until Safe mode appears in the lower-left of the unlock screen.
This may take up to 30 seconds.
While in Safe Mode, remove the most recently installed applications.
Power cycle the device then attempt to use the device.
If the device works properly, install applications one at a time to identify the application causing the problem.
 Steps to disable safe mode:.
Press and hold Power button.
Select Restart.
Select Restart.
 Steps to ensure your location services our turned on for your GPS:
From the home screen, touch the applications tab (located in the lower-left).
Touch Settings. 
Touch Location.
Touch VZW Location Services.
GPS / VZW Location Services is enabled if a green check mark is present.
If prompted, touch OK.
Touch Standalone GPS Services.
Standalone GPS Services is enabled if a green check mark is present.
If prompted, touch OK.
Touch Google Location Services.
GPS / Google Location Services is enabled if a green check mark is present.
If prompted, touch OK.
If prompted, select Agree.

Similar Messages

  • Ipod 4g does not work with gps mount anymore, with iOS lower than 6.0.1 it worked

    After updating my iPod to iOS 6.0.1 and 6.1 my gps mount does not work anymore. It used to work perfectly.
    Have checked with a TomTom app if satelites are connected and it has good connection but navigation app does not work.
    All advices given in the community did not help so far.

    Have yo look here:
    TS1702 magellan External gps not...: Apple Support Communities
    after updating to iOS 6 gps signals are...: Apple Support Communities
    Otherwise I know of no solution.
    For the future just saying "All advices given in the community did not help so far." provides us with no information as to what that is.

  • Location Service not Working with Weather Widget in Notification Center

    Is ibt just me or is the weather widget not validating locations? I have restored iOSS 6.0.2 and toggles location services (enable/disable) for the app and removed it from the notification menu. It is working on both my iMac and MBP. Any suggestions? Anyone else having issues?
    Thanks in advance...Happy New Year!

    I see your point.
    Launching the Weather app updates, but that's not push, right? So it could be that the widget in the NC relies on push. But why does it need to? Why doesn't it request an update when I pull down the NC, just like when I start the Weather app?
    It seems to happen quite often, not like it's a one-off kind of server problem.  I haven't been able to discern a pattern, but it's often enough to be so annoying that I almost want to remove it from the NC.

  • Why does location services not work on my ipad2 with ios7?

    Why does my wifi only iPad 2 location serves not work...worked for years, even when I traveled extensively and returned home. I loaded ios7plus and went out West for the holidays.  Worked out West and on return, did not...live in country and worked when I took it to Mickey d's six miles away.  Only change is ios7 and it's default to Apple maps.  Apple support claimed to have passed this to engineering, but despite my follow ups with them using my case number, they have left me in limbo with a silent phone.  This is very wrong and not the apple I have known...very frustrated.

    Cause Wi-Fi only iPads do not have GPS receivers in them, nor can they use the cell towers for triangulating position. Best they can do is guesstimate based on the hotspots they are connecting to. They base their guess on a database of known hotspots, which can be incomplete, erroneous or wildly inaccurate. The  rise of the problem can be due to any change you or your ISP has done to the Wi-Fi setup you use.
    If you need to depend on critical apps that require reliable Location Services, get Wi-Fi+Cell devices next time. They can be used without a SIM chip with no problems (and not paying for cell charges), but GPS will work fine.

  • Promemoria geolocalizzati non funzionano con iOs 7 location-based reminders do not work with iOs7

    promemoria geolocalizzati non funzionano con iOs 7
    location-based reminders do not work with iOs7

    Hi konekotron,
    See this manual about using the Apple Wireless Keyboard with your iPad -
    iPad User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    See page 25 and the section on using International Keyboards on page 125.
    A similar guide for the iPhone -
    iPhone User Guide
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    See page 28.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

    I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer.  I have been using Windows Vista, but recently upgraded to Windows 8.1.  I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1.  I have attempted to find a driver upgrade for the B500, but there does not appear to be one available.  I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one. 
    Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

    Hi @Raider83,
    Welcome to the HP Forums!
    I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
    I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
    Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode.  It is not guaranteed to work, but it is worth a try!
    If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
    Thank you for posting, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • The "Adobe Reader 11.0.08 security update - All languages" is not working with "Adobe Reader 11.0 - Multilingual (MUI) installer" using msiexec when creating an msi package. is there going to be a release of Adobe Reader 11.0.08 update - Multilingual (MUI

    Is it possible to create an msi package if the product you are upgrading is Multilingual (MUI) and the update(msp) you are applying is not Multilingual (MUI) but "All languages"?

    Please download the latest Adobe Reader patch from the below mentioned location, it will work with MUI installer.
    ftp://ftp.adobe.com/pub/adobe/reader/
    ~Deepak

  • Av adapter not working with ipad 2, please advice

    I bought an av adapter 2012 release, is not working with my ipad 3g att ios version 4.3.5 i tried reset, changing the widescreen button multiple times no luck no video mirroring or sound. When i plug there is a msg displayed: accessory not supported.
    I have 2 questions :
    1) is this a ios version ? There a lot people complaining that after updates the adapter stopped working, if it is is this version w abug?
    2) can i update the ios to 5.x not the ios 6 or i m forced to update to the last version ?

    See the following where it states the requirement of iOS 5.1 or later (in the features box)
    http://support.apple.com/kb/HT4108?viewlocale=en_US
    And yes, you should be able to update to iOS 5.1 without going directly to iOS 6. You need to locate the correct .ipsw update file for your iPad 2 and manually install it through iTunes. Google "ios ipsw 5.1.1" for links to the iOS 5.1.1 files.

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • How can use my Wireless Location Appliance to work with RF ID's?

    How can use my Wireless Location Appliance to work with RF ID's for Asset Tagging.
    It seems Smartcard used for ID cards have a small RF ID, can I use this for Asset Tagging?
    Thanks in Advance

    There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
    Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

  • VM Manager's Launch Console not working with OpenJDK and IcedTea

    Fedora 15
    java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
    icedtea-web-1.0.4-1.fc15.x86_64
    ICEDTEA-WEB NOTES
    Invalid XML
    An error like
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
    indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
    XMLPROC_PARSE OUTPUT
    $ xmlproc_parse ovm_rasproxy-ws.jnlp
    xmlproc version 0.70
    Parsing 'ovm_rasproxy-ws.jnlp'
    E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
    E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
    Parse complete, 2 error(s) and 0 warning(s)
    JAVAWS OUTPUT
    $ javaws ovm_rasproxy-ws.jnlp
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
    JAVAWS -VERBOSE OUTPUT
    $ javaws -verbose ovm_rasproxy-ws.jnlp
    No User level deployment.properties found.
    Starting security dialog thread
    JNLP file location: ovm_rasproxy-ws.jnlp
    Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
    line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
    line: 4 <information>
    line: 5 <title>Oracle VM Remote Access Service</title>
    line: 6 <vendor>Oracle</vendor>
    line: 7 <homepage>http://support.oracle.com/</homepage>
    line: 8 </information>
    line: 9 <resources>
    line: 10
    line: 11 <j2se version="1.5+"
    line: 12 href="http://java.sun.com/products/autodl/j2se" />
    line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
    line: 14 <jar href="OvmCoreApi.jar" />
    line: 15 <jar href="MgmtUtil.jar" />
    line: 16 <jar href="Odof.jar" />
    line: 17 <jar href="commons-logging-1.1.1.jar" />
    line: 18 </resources>
    line: 19
    line: 20
    line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
    line: 22 <argument>-server</argument>
    line: 23 <argument>192.168.4.21</argument>
    line: 24 <argument>-service</argument>
    line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
    line: 26
    line: 27 </application-desc>
    line: 28 <security>
    line: 29      <all-permissions/>
    line: 30 </security>
    line: 31 <update check="background"/>
    line: 32 </jnlp>               net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
         at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
         at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
         at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
         at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
         at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
         at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
         ... 8 more
    Caused by:
    net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
         at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
         at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
         at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
         at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
         at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
         at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)

    Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
    I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
    [gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
    [gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
         at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
    [gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
    [gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
         at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
         at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
         at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
         at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
         at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
    Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
    INFO: Server : 192.168.4.16
    Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
    INFO: service id : 003600010004fb0000060000281734f86e6aab47
    Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
    INFO: Os is : linux
    Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
    INFO: DONE SSL Handshaking
    The console starts and all is well with the world.
    This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
    First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
    [gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
    #automatically generated - do not edit
    #Tue Oct 04 16:43:29 EDT 2011
    last-modified=0
    last-updated=1317761009801
    content-length=883
    If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
    Help?

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Maybe you are looking for

  • Ipod color will not show up as a ipod color

    I just upgraded from a 3g 15 to a 4g 60gb color. i can connect to OSX most of the time, and i can get my music on there (with out pics). problem is that my itunes on my powerbook does not show anything in the options about photos. i opened itunes in

  • How can we make the status of the Idoc based on some response Text

    Hi All, I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly. I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice. I have mapped the response Text( Success or Fail) to one of the fie

  • Applet works in MS JVM but not in JDK1.4 !

    Running IE 6 SP1 with windows 2000. Everything works well until I installed JDK 1.4 recently. I have an ancient (JDK 1.1?) applet that refuses to work with JDK 1.4 But when i disable JDK 1.4 under internet options , it works! This is the error "java.

  • Adobe flash player for xoom

    Hi, when will the flasher player be available for the motorola xoom 3G?  if unknown, is there a replacement out there somewhere?

  • Any books for Oracle ADF 11g certification

    Hi, I am planning to take oracle ADF certification (Oracle Application Development Framework Certified Implementation ). Any suggestion on books and reading materials? Regards, Kumar