My Mac Book currently is using snow leopard, which is an upgrade.  I would like to upgrade again to the mountain lion so I can use my new nano iPod.  Will my Mac Book be compatible?

I am currently running an upgraded OS X 10.6.8 on my MacBook.  I would like to upgrade to the Mountain Lion.  Is my MacBook system compatible to run that version?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest MacBooks of each type that can run Mountain Lion and newer:
MacBook5,1
MacBookPro3,1
MacBookAir2,1
A Mac older than those listed which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by clicking here. Neither Yosemite nor Lion support PowerPC software such as Microsoft Office 2004.
(124717)

Similar Messages

  • I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

    I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
    I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
    When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
    I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
    Any advice is appreciated.
    Thanks in advance.

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • I would like to upgrade my macbook from 10.6.8 to Mountain lion. however, the app store said that my macbook isn't compatible with the mountain lion . Why can't I update it to mountain lion? and How can I upgrade it to a newer version ?

    I would like to upgrade my macbook from 10.6.8 (Snow Leopard) to Mountain Lion. However, app store said that my macbook is not compatible with Mountain Lion? Why  can't I upgrade my macbook to mountain lion? And How can I upgrade my macbk to a newer version such that I can download the newest version of imovie?
    Here r the system info of my macbook:
    Mac oS X  (version 10.6.8)
    Processor :2.2 GHz Intel Core 2 Duo
    Memory: 2 GB 667 MHz DDR2 SDRAM
    Model Identifier:  Macbook 3,1
    I

    Requirements for Mountain Lion:
    http://www.apple.com/osx/specs/

  • I needed to change my i tunes e male address but i used this email address to open a 2nd account. I need to cancel the 2nd account so I can use it to change my old account. How do I do this?

      I needed to change my i tunes address but I used the new e male adress to open a new account that I dont want. how do I cancel this account so I can reuse this emal adress for my old account.

    I'm afraid that once an address has been associated with an Apple ID you can't re-use it in any way. You will have to create another address (such as a free on from GMail or Yahoo for example).

  • Print to PDF - using Snow Leopard (Saving a PDF file when printing is not supported. Instead, choose

    i have a PDF form that i created that is used as a custom proposal that my company sends out to potential clients. the form in its editable state is only used internally. we recently upgraded to snow leopard, but prior to the upgrade, we were able to fill the custom proposal form out using adobe reader, and, as you well know, we weren't able to save that edited document as a PDF with the custom form fields filled out. our work around using adobe reader was to print to a pdf using the adobe pdf printer in the printer dialog. with the addition of snow leopard, however, instead of choosing the adobe pdf printer, we were to choose PDF from the bottom left corner, then Save As PDF, and it would spit out an uneditable pdf that then allowed us to email it to the potential client without them being able to edit it as well as have an internal, digital copy for our records instead of having lots of paper floating around (i know this is also doable using security that disallows the client certain editing privileges, but printing to a pdf is much quicker and more efficient, and the pdf security isn't really that secure at its best).
    in any case, i came across this gem of a post here on the support forums that installs another option from the PDF drop down on the bottom left of the print dialog menu that reads Save As Adobe PDF and is supposed to do exactly what i am trying to get it to do...print to a pdf file from adobe reader.
    http://kb2.adobe.com/cps/509/cpsid_50981.html    
    once i updated to acrobat 9.2 (as the link above suggests 9.1), however, the Save As Adobe PDF does appear in the print dialog menu, but it still gives me the same error that acrobat 8 - 9 gave me while using Snow Leopard — Saving a PDF file when printing is not supported. Instead, choose File > Save — and as i've already explained, you can't save an edited pdf form in reader (as i am the only one in the office with acrobat) and still keep the fields as you've entered them in. the only work around is to print to a pdf but is apparently having some recent problems.
    using acrobat, however, i know that i can save the editable pdf as a new file with the fields customized as i have left them, but it still saves it as an editable pdf and the print to a pdf option still remains the best option...that way we have digital copies internally that are uneditable that can be printed at any time or emailed to the client.
    how can i do print to a pdf, based on what i've written above, using snow leopard and acrobat and reader?

    A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

  • How to install Windows XP using Snow Leopard Bootcamp

    Have a MacBook purchased Mar '11 that came with Snow Leopard and when attempting to run Bootcamp to create Windows partition receive msg that only Windows Vista or 7 are supported.
    Also have Macbook Pro Jun '08 and Macbook Apr '09 that have Windows XP partitions created with Leopard Bootcamp which Apple Genius Bar upgraded to Snow Leopard and the XP partitions still run with no problems.
    Why does Snow Leopard require Win Vista/7 for new Bootcamp partitions but supports Win XP on partitions that where created with Leopard?
    Is there a way to use Win XP with Snow Leopard as purchasing 4 Win 7, would never run Vista, is a VERY undesirable option.
    First time using this forum, but will do whatever I need to ensure answer(s) get points.
    Thanks for your help.

    Hi Bob.
    Your questions have simple answers. I hope you find them helpful.
    1. Yes, Windows XP will install on your MacBook Pro.
    2. Most games run properly on Windows 7 Home Premium. But if you're really a hardcore gamer, I suggest you get yourself a copy of Windows 7 ULTIMATE (It's a little expensive though).
    3. Home Premium costs around $120. Ultimate shoots up to $220. There is a Professional edition as well but that's not the type you want (It's particularly for business users, plus its $200). If your budget is restricted to $140, I suggest you go ahead with Home Premium. You can squeeze in a $20 software/game as well. I have been using it for quite some time on my MacBook Pro. It's great!
    Regards.
    Abhishek.

  • I have a mac  book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

    I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

    10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
    You can get it only by phone now from Apple.
    In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
    For other countries, check here; http://support.apple.com/kb/HE57
    Don't forget to ask for Sales; the tech support guys can't help.
    If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
    To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
    Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

  • I currently use Snow Leopard and Microsoft Word, Excel and Entourage o my Mac.  If I upgrade to Mavericks, can I still use those applications?

    I currently use Snow Leopard with Microsoft Word, Excel and Entourage on my iMac.  If I upgrade to Mavericks, can I still use those applications?

    If the Microsoft Office is 2004 then no.
    Mavericks System requirements.
    http://support.apple.com/kb/ht5842
    Note I would recommend a minimum of 4GB RAM.
    You need to check all you software and hardware including any peripherlas you use, printers etc that they are compatible with Mavericks.
    Any software that is PPC and uses Rossetta will not work with any OS X verson later than 10.6.8 Snow Leopard.
    If you decide to upgrade have a tested backup of your current system in case of problems and you could return the computer to its previous configuration.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

    I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

    First, you cannot do this if you have a Boot Camp partition.
    Second: Create a new partition.
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    Third: Install Snow Leopard.
    Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple logo
          appears.
      5. Wait for installer to finish loading.

  • Ipod touch 4g 4.3 not detecting in itunes 10.1.2, i am using mac os x 10.3 snow leopard, can someone help?

    ipod touch 4g 4.3 not detecting in itunes 10.1.2, i am using mac os x 10.3 snow leopard, can someone help?

    You do not need Snow Leopord (10.6.X), but you do need Leopord (10.5.8) and iTunes 10.x for iOS 4.3. You need iTunes 10.5 for iOS 5
    For the Current  (iOS 5 iPod touch specs)
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.5.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)7

  • Using snow leopard on external hard drive w/Mountain Lion OS Mac

    I need to use Snow Leopard in order to use some expensive software that will not work in Lion or Mountain Lion. All of our computers have been upgraded to Mountain Lion, whcih doesn't support Rosetta. I was able to install Snow Leopard on an external hard drive and it boots up fine from another computer (that is not mine) that has Snow Leopard as its OS.
    But when I boot up from my MacBook Pro (running Mountain Lion) and from my Macbook Air (also running Mountain Lion), I can't seem to do it. I hold the "option" key when starting and I get the option to start from the computer's HD or from the external firewire Snow Leopard drive. When I choose the Snow Leopard drive, it crashes and gives me that black screen with the kernel (?) message in several languages that I need to hold down the Power key to turn off the computer and reboot.
    How can I get my MacBook Pro or my MacBook Air to boot up from the Snow Leopard external hard drive? (Once again, it DOES work with a Mac that has Snow Leopard as its OS).

    Richard Signes2 wrote:
    The question is: How do I start up my MacBook Air (or MacBook Pro) from an external FireWire Bootable hard drive with Snow Leopard on it?  When I start up either one with the "option" key pressed, I get the option to start up with the external Snow Leopard hard drive, but when I select it, it crashes, as described above.
    You can't if the Mac is a Late 2011 and later, perhaps if it's a Early 2011 (as some came with 10.6 and some with 10.7) and it should be possible for all Intel Mac's earlier than Early 2011.
    Also, like what has occurred in the past, Apple does eventually issues a firmware update in later OS X versions so that earlier OS X versions, despite the Mac previously being able to boot from them, won't any longer. However far as I know Apple hasn't done this quite yet, but will one day.
    Baring those issues, if you installed 10.6 on a external drive using a machine specific black/gray disk from another Mac, it has hardware drivers for that model/year of Mac only.
    If you used the 10.6 white retail disks from Apple, it only has hardware drivers for all previous Intel Mac's that came originally with 10.6.2 or earlier from the factory. Mac's with 10.6.3 or later on the drive from the factory have different hardware drivers, thus not on the 10.6.3 white retail disk.
    To find out what OS X version came on your machines, use the free MacTracker and use your model indentifier in the Apple menu More > Info (aka System Profiler)
    So for those Mac's that originally came with 10.6.3 or later, machine specific disks must be gotten from Apple, or if your really talented, it's possible to create a univeral 10.6-10.6.8 install disk by combing the 10.6.3 image with the 10.6.8 combo update which will boot on any Intel Mac if the firmware permits and the hardware drivers are compable.
    There is a method to bypass the firmware and install on Mac's that are Early 2011/Late 2011 via Target Disk Mode, or via taking the drive out of the machine as some Late 2011's use the same hardware drivers as the Early 2011 machines (only a processor bump basically)
    How to revert your Mac to Snow Leopard
    For the MacAir, you can install 10.6 via a USB thumb drive, of course provided it has the hardware drivers.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    So in your case you likely should be rather looking at running Snow Leopard in a virtual machine program in Mountain Lion, which MichealLax over at MacRumors has perfected a technique.
    Windows in BootCamp or Virtual Machine?
    http://forums.macrumors.com/showthread.php?t=1365439

  • Many online sites say no longer support .... using Snow Leopard 10.6.8 on mac mini. What do I do?

    Many online sites for insurance, banking, etc. say they no longer support my system.  I use Snow Leopard that came with my Mac Mini and it's update if I go to the "software update" which is 10.6.8.  What do I do? 

    Your Mac Mini is capable of being upgraded to Yosemite (free in the Mac App Store). The specified minimum of RAM is 2GB but you are likely to find it runs very slowly on that, with a lot of beachballing. I don't know what the maximum RAM is but you should consider installing extra if you can. Even so you may well find it's rather slow - Yosemite is really optimized for modern Macs running SSDs.
    Snow Leopard isn't getting any more security updates by the look of things, so there's a lot to be said for upgrading it. However if you install the latest FireFox (36.0.4) that will run on Snow Leopard and should at least solve the inaccessible sites problem.
    If you do decide to go for Yosemite you should make comprehensive backups: I would advise if possible cloning the entire Mac to an external hard disk, so that if you find you don't like Yosemite you can clone back and be no worse off. Otherwise downgrading is frankly a pain to do.

  • Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard

    Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard?? Need Help!

    That machine requires the 10.6 white retail disks, gray or black machine specific ones from another Mac won't work.
    How to erase and install Snow Leopard 10.6
    For Snow Leopard Speed Freaks
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • I have a mac book pro with ocx snow leopard I wont upgrade to what?

    I have a mac book pro with osx snow leopard I wont upgrade to what?

    OS X Mountain Lion system requirements
    To install Mountain Lion, you need one of these Macs:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory
    8 GB or more of available space

Maybe you are looking for

  • How can i get the variable declared in jsp to a javascript function

    Hello all. I'm in a trouble.. i was developing a program in jsp oracle. and in some cases i use java scripts.. here in the HR program module i feel a trouble. the code here i'm sending is just a trial one.. the jdbc and all are doing in the jsp page

  • How do I remove just the TOC, or Just the Index, or both? I only want the Search tab to display.

    We use the TCS suite to create multiple webhelp projects.  We're integrating a virtual assistant with our help, and I've been asked to remove the TOC tab from displaying.  The index, glossary, and search can remain. I don't know how to accomplish thi

  • Photo Not Updating for Podcast

    I have a minor issue with the Podcast app from iOS 5.1.1 thru 6.1. The artwork for the podcasts are not updating in the app.  I listen to a lot of music podcasts and on iTunes I see the updated artwork every week.  When I sync my iPhone 5 I will see

  • Why cant my pictures turn to the side?

    My videos and pictures will not turn to the side horizontal, neither will my itunes music! Can anyone help?

  • Key-Others Trigger (Please help!!!)

    Hi everybody, We are trying to restrict the end user from pressing some 'dangerous' keys, i.e clear block, execute query, even the DOWN key causes us problems in some (1 record) blocks. I know there is a way to do it using Oracle terminal but it seem