My MacBook Pro 17" was stolen. How do I communicate to you that this particular computer was stolen incase someone brings it in for service or updates? Thanks, Morris
My MacBook Pro 17" was stolen on Feb. 22, 2012: Model # A***9; Serial #W8*******94
How do I flag this computer with you in case someone tries to bring it in for service?
Thanks, Morris
<Serial Edited by Host>
EMDAVIS, I just went through this. Report it stolen through the proper police. Then have the police call them call Apple with the Police report and request that the Serial number is taged. The local detective here said it took 3 phone calls. It also helped that I used iCloud to wipe the computer so the person who has it now may need service. Good luck EMDAVIS. Sorry for your loss!
Similar Messages
-
I am trying to register my macbook pro and every time i got a message telling me that this product is registered with different apple id, how it comes?
Sounds like you got a used computer and paid new for it, that's illegal.
"Open box" is a return by a previosu customer and can't be sold as new, you should have gotten a discount or informed of such.
Once obvious sign is it doesn't come with free iLife on it, as the drive was erased. -
Having a DVD that I created on a Mac, how do I make additional copies? I know from reading some instructions, to use the Disk Utility, but from there I don't see the inserted DVD to be copied on the left side, as the instructions say for step #2. Please help
Hello wrinkle2,
Thank you for using Apple Support Communities.
The following article provides information on duplicating a DVD in Disk Utility.
Disk Utility 12.x: Duplicate a disk, CD, or DVD
Regards,
Jeff D. -
Cookies are enabled. Sites are checked "remember password" and "automatically log me in." I have checked "yes" to "Do you want firefox to remember the password for this site?" Some sites do auto-fill my username or password, but I still have to go through the process of approving, checking, and clicking, every single time. One example is yahoo mail...but it happens everywhere. It's like every time I access Firefox, it doesn't remember anything.
* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences" -
i think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?
The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they may be the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked.
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. If the fake update alerts stop, see below. Otherwise, ask for instructions.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions. -
Can I change a new battery for my MacBook Pro 15' Retina? How?
Can I change a new battery for my MacBook Pro 15' Retina? How?
Hi!
About a month ago, my MBPr 15", mid 2012 (Model Identifier10,1) showed, at first, Battery Service warning and on the next day X over the battery icon with Battery Not Available message in the status. MBP would run only and while the charger was plugged in, plug led would be always green, when connected. Battery test third party sw would not detect the battery, any longer.
Replacing upper case with battery/keyboard/trackpad, as per Apple, in my country was too expensive, over 1000 USD, did't make any sense to me, so I've chosen DIY option (https://www.youtube.com/watch?v=pLhHSIej9fs) with all necessary precautions like tools, ESD protection grounded pad in place and ordered "new" replacement battery from Hong Kong on Ebay (http://www.ebay.com/itm/400699766989?_trksid=p2057872.m2749.l2649&ssPageName=STR K%3AMEBIDX%3AIT).
Yesterday I came in new packing/sealed, I installed it, plugged the power cable on, plug led would turn green and then orange, I thought it's ok, but once system booted, I saw again X over battery icon and "Battery Not Available". I checked all the hints on internet, tried several times SMC and EPRON resets, no success. I filed complaint to Ebay supplier, he replied that battery undergone test prior the shipment, but ready for return and refund.
So, I can make another try and buy the battery from Ebay but what if the problem is with my logic board? From one hand charger plug led lights orange when connected to MBP, on another hand System doesn't see the battery at all: No battery in the System info/Hardware/Power. it works absolutely fine when plugged-in to charger. I ran extended AHT (over pressed "D" key while powering on) twice with No Problem in return. So, my question is does it ultimately mean that Logic Board and power circuits are all fine and the whole thing is about "new bad" battery? I there any way to entirely test Logic board and narrow down problem origin?
Thank you for attention in advance,
Nurlan -
i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?
It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895 -
How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.
Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2. -
I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?
It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere. -
After upgrading to Yosemite, my MacBook Pro now requires me to enter a password whenever I start up my computer. I want to eliminate this step and to go back to the ability to reboot and begin using without a login. How do I accomplish this?
Hightlight Login Option. This will bring up the window showing Automatic login.
Please post a pic of your window if Automatic login is missing. Make sure your personal info is not showing. -
Hi There,
I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
NelsonEither the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes. -
How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.
It's not completely obvious. What you have to do in Spaces is to position your cursor to the upper right of the screen, after which faint + (plus) sign appears in that area. Click that, upon which another Desktop will appear.
The + may be difficult or impossible to see with some desktop backgrounds (black, for instance): -
hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?
either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
PRAM http://support.apple.com/kb/ht1379 -
Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd+tab, moving the trackpad on the apple, but no. HELP!
Dear John,
thank you for your prompt reply. After I sent the email, I left the wheel spinning to see if it would eventually stop. It didn't, but after a while the screen turned blue, so I decided to switch everything off with a forced shut-down. I could not restart with the OS DVDs because I am currently away from home, but fortunately everything was more or less fine after restarting. It then got stuck again, I forced it shut again, restarted again, and now it seem to work but I won't overdo it and will switch off smoothly after writing this (unless it gets stuck again). Last April I have replaced the HD, so it's now just under 6 months old. And, of course, since the crash occurred when I was abroad and had backed up just before I left, I have lost only a few days' work. Still, and I know this will make me hugely unpopular here, with my 5 previous laptops running on MS Windows I never had a problem. Which does not mean I loved the OS, or I would not have switched to Mac.
Anyway, and this is the main reason for this message, thank you very much again for your speedy intervention.
Claudia -
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
Maybe you are looking for
-
-
The itunes library file cannot be saved...WHAT?!?!?!?!
So, yesterday my computer crashed and I had to reboot it's operating system, tus starting all new. I had backed up my old itunes so I was using the back up disk. When I get to the middle of the last disk an error pops up that says "The itunes library
-
Just installed WLS 7.0 from CD from Java mag. Downloaded license.bea and copied in c:\bea, changed sdk1.3.1 to sdk 1.4.1 since my EJBs use nio, tried start server and got License Exception. What can be a problem? BTW if I try C:\bea>UpdateLicense.cmd
-
Macbook wont load!!! CMD+R doesnt work!
Hi! I just tried updating to OSX Yosemite, however halfway through the installation the Mac displayed a notice stating "an error occurred" and restarted. Since then i have been unable to boot up my macbook. If i try to boot normally it just gets stuc
-
Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?