My macbook pro keyboard has stopped working overnight. The DEL button, along with O and P are acting strange. The DEL button is adjusting screen brightness and the O isnt working at all. Is this hardware related? or a software issue?

The left side of the keyboard seems to be working fine but the DEL button and other buttons are doing strange commands. The DEL button is adjusting the brightness and other F commands.
The O is not working at all. Some other letters are coming up with other characters.

Try a different keyboard with your computer if possible. If it woks well, it's a hardware problem.
http://support.apple.com/kb/TS1381?viewlocale=en_US

Similar Messages

  • Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi. Not so with Daughter's Snow Leopard or Wife's Dell.  Any ideas?

    Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi (seems to search forever).  This is not the case with my Daughter's MacBook (still on Snow Leopard) or my Wife's Dell (Windows 7).  Any ideas?

    Hold Option when you click on the Airport in the top bar & post the stats.

  • My macbook wi-fi has stopped working altogether. What can I do to remedy this?

    My Macbook wi-fi has stopped working completly. It was not a matter of the wi-fi being off and on but rather when it failed, it failed and never worked again.
    Has anyone experienced this happening and what are the remeddies to the problem?

    You should check if this is a hardware problem. In OS 10.9.2 you can do this:
    Apple menu / About This Mac / More Info / Overview / System Report.
    (note the details of this path are different in other versions of Mac OS X.)
    Under Network in the left column, select Wi-fi. If your hardware has failed, the right side will say something to the effect of no device detected.
    If the hardware has failed you will have to open the Macbook and replace the card - assuming your MB model allows that. If the hardware is detected, there are steps you can try, but they depend on details about your computer that you have not provided.
    If you follow up with another post, please tell us what version of Mac OS X you are running, and the Model Identifier of the Macbook.

  • New Macbook Pro Keyboard not working at all

    My MacBook Pro keyboard is completely unresponsive. Any ideas?

    Hey Guys,
    I figured it out. By searching some other cursor/mousepad thread: I had to do a PRAM reset. Now it's working!
    http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US

  • My Apple Bluetooth keyboard has stopped working. The top row of keys works but the rest of the keys do not. I was carrying this in my computer bag without turning it off and that is when this started.

    My apple bluetooth keyboard has stopped working. The top row of keys works and the iPad sees the bluetooth keyboard (the bluetooth icon is active) but the other keys do not work. For the past coupld of days I have carried my keyboard in my computerbag without turning it off and I am thinking I have done something to make the letter keys to stop working. Two days in a row I did turn on the music as I carried the computer bag into work so I know that some keys were being activated.

    *UPDATE*
    I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area.

  • My Mac USB keyboard has stopped working

    Hi,
    I have a less than 6 month old fully loaded iMac 3.4 ghz i7.  Overnight my USB (alphanumeric keyboard has stopped working.  Had to dig out a wireless keyboard from another mac to login.  The tried unplugging and moving the USB.  ( All USB ports works and are powered up with other devices )  No change.  Tried full system reset with power cord removed for 5 minutes,  no change.  Tried it all twice,  no cahnge.
    Typing this on wireless keyboard and hoping someone can confirm if Mac has pushed an update that forgets about the keyboard or if there is known issues with the usb wired keyboard that means they have suddenly got a life of less than 6 months?

    Not any updates I know of, but if there were Software Update would offer them. Have you tried and SMC and PRAM reset - sometimes sorts out odd issues?
    https://discussions.apple.com/docs/DOC-3603

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

    The "enter" key on the numeric keypad of my external mac keyboard has stopped working with my Macbook pro.  If I plug the keyboard into any other computer, that entier key works fine. I'm using a standard Mac wired keyboard, & it's worked fine for 2 years now. Help!
    This is the keyboard I am using: http://store.apple.com/us/product/MB110LL/B/apple-keyboard-with-numeric-keypad
    Not sure what I might have accidentily done to disable the enter key. (The normal enter key works fine, just the one on the numeric keypad.)
    Thank you for your help.

    Hi there,
    Do you have any resolution to this problem in the end? Because it happened to me an exact same thing.
    Please share if you have found a solution to your problem. I also cannot think of what I did wrong to disable the Enter key.
    Best Regards,
    Jeffri

  • My MacBook Air keyboard has become raised and spacebar is not working!

    My sons MacBook Air Keyboard has become raised/warped. The centre point of the raised area is the top left hand corner of the trackpad. I would say the highest point is 2 to 3mm above the normal surface line.
    The first signs of the problem was an inconsistency in the spacebar operation. Now the spacebar fails to operate at all! Apart from the Spacebar the Air seems to perform all other functions normally.
    The raised area /warped area has also created a wobble when the MacBook Air is on a flat surface. 
    Model A1237
    MacBook Air 1.6 Ghz Intel Core Duo
    Memory 2GB 667 MHz DDR2 SRAM
    Serial Number W8806AVHY51
    Software Mac OS Lion 10.7.1
    Thank you for taking the time to read my issue and hopefully provide some guidance!!

    If your Air came with Lion pre-installed you might find it a bit complicated to downgrade. In any event the battery should be replaced under warranty. [My 17" battery was replaced by Apple at the Genius Bar even though the year warranty had expired; they were genuinely concerned since there was a safety issue concerning power!] On the point about your 3 Lion concerns, I note that many on this forum have dealt with similar issues. In my case I purchased a new machine with Lion rather than upgrade my existing Snow Leopard MacBook Pro 13" or iMac 27" and have found there to be no troubles whatsoever. I enjoy the speedy response and smooth execution of tasks on 10.7.2. Good luck with your battery issue. 

  • My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for 10 secs. I just cannot work out what else to do?

    My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.

    The ethernet says self assigned IP 169.254.67.6
    Then the ethernet is not getting an IP from the TC.. there is no connection.
    I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
    Thanks
    In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
    To get access to the TC you need this led to be green.. is it?
    If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
    How old and what model is the TC?
    The A number from the rubber mat will tell us the model.

  • Macbook Pro Keyboard Not Working - Bootcamp.

    Hello, My Macbook Pro 15" has been acting up lately.. Corrupted drives, Bootmgr going missing.. And all that good stuff. Well, I have a 2010 model with a 500GB 7200RPM and 4GB of RAM. My keyboard is the only thing I have not been able to fix. It work's just fine on my Macintosh HD partition, but when I boot into Windows Ultimate x64 my keyboard won't even work only my function keys ( backlit, brightness, volume, ect. ) Nothing else. I have removed all the driver's and re-installed them, still nothing. Please help.. Iv'e been so frustrated with this.. Thanks.

    Anybody?

  • The top row of my iPhone 3GS keyboard has stopped working.

    The top row of my iPhone 3GS keyboard has stopped working. I've already done a soft reset, hard reset, and restored it to a new device. What else can I do?

    When you are using other applications, or just on the home screen, does that area of the screen respond to touch?
    Steps to resolve issue (I understand you have done what you have but it's always good to try again):
    Clean the iPhone screen with the cleaning cloth that came in the box with the iPhone.
    Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
    If you have a protective plastic sheet or film on the touchscreen, try removing it because it may be preventing the touchscreen from working properly.
    The current application may not be responding (frozen), press and hold the Home button below the screen for a least six seconds, until the application you were using quits.
    If that doesn't work, turn the iPhone off and turn it on again. Press and hold the Sleep/Wake button on the top of the iPhone for few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    If that doesn't work, reset the iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation and replacement, if necessary, even if your iPhone is out of warranty. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the iPhone Service FAQ.
    Tip: If you are going to take your iPhone into a Apple Retail Store for evaluation, follow these steps to help the Mac Genius understand where your touch screen is experiencing unresponsiveness.
    Open the basic calculator application to test all but the top row of the screen. Press each button on the calculator and verify activity.
    To test the area at the top of the screen, rotate the iPhone to change to the scientific calculator and press all the buttons in the left two rows. (An original iPhone must have iPhone 2.0 software installed to access the scientific calculator feature.)
    To test the touchscreen function at the top of the screen of an original iPhone without the iPhone 2.0 software, press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. If the slider does slide, press and hold the Sleep/Wake button until the Apple logo appears to turn iPhone on again.

  • Backlit Keyboard has stopped working on Satellite P50-A-12Z

    I bought my Satellite P50-A-12Z over a year ago, and since few weeks the backlit keyboard has stopped working.
    I used to hold FN+W to turn on/off the light keyboard, but now it doesn't work anymore and I have the message "chronometer" on the top right of the screen as you can see on this screenshot:
    https://imagizer.imageshack.us/v2/1050x591q90/903/Estd0f.png
    When I go to Desktop Assist > Tools & Utilities > Function Key , keyboard backlight is set to OFF but can't set it to ON:
    https://imagizer.imageshack.us/v2/1050x591q90/745/gMqGvq.png
    Please help me

    Hi
    I don't know if this will help but try please following: perform complete shutdown - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Start notebook again and press F12. There you should find option to enter BIOS settings. Enter BIOS settings and try to enable keyboard backlight there.
    Please test it and send some feedback.

  • Macbook Pro Keyboard and Trackpad Not Working

    few days ago, my Macbook Pro keyboard and trackpad started to act very oddly.
    Basically, the keyboard doesn't work at all. I press down the keys, and all I get is that error message sound. The volume and display brightness keys seem to work, but almost all of the others just won't type anything. it-s like any key command or alt would stay pressed so when i click any key its trying to perform other function instead of just typing the letter. that-s probably the reason why the trackpad is also being very odd. When I first turn on the laptop, it seems to work as normal. I can click on an application, and it opens. But about one minute after the laptop first starts, it's like anywhere I click on the trackpad is a right-click. To open an application, I click like I normally would but instead of opening, a menu pops up as if I right-clicked. This happens in Finder and everywhere else that I've tested (for instance, I can't drag any Finder windows to different positions on the screen, because it acts as if I right-clicked instead of left-clicked), no matter whether I tap or click the trackpad.
    I have reset my permissions, but that didn't fix anything. I verified the hard drive and it said there were no problems. A big issue is that I can't do anything that requires me to type in my password, since I can't type anything. I tried to reset the PRAM, but I don't think that it even registered me pressing the Command-Option-P-R keys when I booted up, so i just removed the battery for a while, i am not sure that did anything at all.
    i tried to reinstall the os, i had mavericks and i installed a fresh mountain lion but the problem persists. i recently installed virtualbox and the keyboard seems to work right as long as i do not press any of the following keys command, alt, shift, etc.. if i press any of them same thing happens. i found that if i connect a usb keyboard everything works, but when i use the inbuilt keyboard the problem is back and a i have to connect disconnect the usb keyboard to be able to type or use the trackpad normally.
    any help would be appreciated.
    Thank you.

    No one cared enough to answer.

Maybe you are looking for

  • Using FORMAT_STRING from SSAS cube - not working consistently

    Here's the deal.   I've got an SSAS cube and I am scoping the format of the measures based on dimension members.  Like this. scope(( [Account].[Level 5].&[I000900000] ));  format_string(This) = "(#,0,);#,0,";    end scope;  I'm then calling this for

  • Windows XP and Photoshop Elements

    I want to re-download Photoshop Elements due to a computer hard drive crash.  My computer runs XP.  I see that he versions available require Windows 7 min.  Is there any way that I can use XP.  I cannot upgrade to Windows 7?   Can I get the older ver

  • Cost center & Profit Center set up

    Hi, I am a Chartered Accountant by Profession. I just started my classes to eventually go for certification as FICO Consultant. I have the following question for you. I would appreciate if someone could answer this for me. THIS IS WHAT I WANT TO ACHI

  • [Solved] Installing on a system that does not boot from cdrom or usb

    I have a very old and stuborn gateway solo 5300 laptop that refuses to boot form the disk I burned for arch linux, as well it refuses to boot from the usb disk I made with dd acording to Usb Flash Installation Media on the wiki I also tryed UNetbooti

  • Keystore communication?

    Hi, I am not an expert in cryprography, but have experience in working with encryption using BouncyCastle and keytool. I have a basic question on the standard practices used with a keystore. Can someone please explain me how two parties communicate r