My MacBook Pro won't charge when I plug it in. the green or orange light won't even turn on. The computer is dead already, so I cannot mess with my settings. What do you suggest?

I have a Mac Book Pro with the serial number: C0*******TY3 and the model no: A1278. I wanted to charge it this morning, and it won't charge meaning that the light even won't turn on, and also my computer is dead, so I cannot change anything on the system preferences. What should I do? I will make an appointment at the Genius Bar, but what do you thing the problem is here?
<Edited By Host>

First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok.  You might want to try using another charger in case the charger is faulty.  If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

Similar Messages

  • Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
    Battery Information:
      Model Information:
      Serial Number:    W0046Q08UBX0A
      Manufacturer:    SMP
      Device name:    bq20z451
      Pack Lot Code:    0000
      PCB Lot Code:    0000
      Firmware Version:    0201
      Hardware Revision:    000a
      Cell Revision:    0157
      Charge Information:
      Charge remaining (mAh):    3211
      Fully charged:    No
      Charging:    No
      Full charge capacity (mAh):    5845
      Health Information:
      Cycle count:    943
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    -1354
      Voltage (mV):    11210
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Wake On LAN:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Battery Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    2
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    No
      Charging:    No

  • My macbook pro will not charge when I am using it.

    My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • I have CS3 and a new Nikon D4 which the RAW files cannot be read by CS3, what do you suggest?

    I have CS3 and a new Nikon D4 which the RAW files cannot be read by CS3, what do you suggest?

    Have you tried the DNG Converter?
    Adobe - Adobe Camera Raw and DNG Converter : For Windows
    --OB

  • I want to buy surveillance cameras and software that are compatible with Mtn Lion, what do you suggest?

    I want to buy surveillance cameras and software that are compatible with Mtn Lion, what do you suggest?

    You do have the ability to create good user interfaces with LabVIEW.
    The main problem is what do you, or your customer consider a good user
    interface.
    The first thing I would suggest is to start using the "Dialog Control"
    controls for your front panel. This set of controls pick up their style
    from the operating system, so they will match the rest of the system
    applicaitons.
    Another thing is limit the use of color on the front panel. One persons
    idea of a nice shade of blue can be another person eyesore. Instead,
    use the decorations for grouping of controls.
    I would stay away from ActiveX. It's interface is quirky at best and there is a lot of overhead involved.
    Just to show it's possible, the attached images are screen shots of
    user interfaces I've designed with LabVIEW. The first two use the
    Dialog Controls, and the third uses standard controls and color at the
    customers request.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
    Attachments:
    DMI_Tester.gif ‏73 KB
    DIIDatalogger.gif ‏102 KB
    Trackerr.gif ‏115 KB

  • I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

    i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

    Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
    "Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
    The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
    If you have a problem with your computer then it's best to ask a specific question so we can help better.

  • Whats the green and orange light blinking at the same time?

    Since i upgraded to itunes 5.0, i lost my itunes , i can not open it no more, installed it again same thing. Now my Shuffle won't work, when you touch play it will blink the green and orange light. Can not speak with a shuffle agent because 3 months passed. And they want you to nuy an a contract for $59.00 for something that cost $149.00?

    Check some of these links out:
    http://www.apple.com/support/ipodshuffle/
    http://www.apple.com/support/ipodshuffle/reference/
    Regards,

  • MacBook Pro will not charge when Computer is on. Can only charge when shut down, MacBook Pro will not charge when Computer is on. Can only charge when shut down

    Hi can anyone help me? My MacBook Pro cannot charge at all (keeps showing not charging or not connected) when i am using it. only when i shut it down or let it sleep then wil it begin to charge normally. Does anyone know what to do??

    You could always try a SMC reset -> http://support.apple.com/kb/HT3964 - but I don't believe that will solve your problem.
    If I were you, I would take the machine to your local Apple Store or an AASP and have them diagnose the problem. It could be something very simple or it may be something more complex within the power management system.
    Good luck,
    Clinton

  • Macbook Pro way too loud when headphones plugged

    Hi
    I've always had this problem, when I plug in any type of headphones, I must lower the volume to one - max two - "blocs" of volume, otherwise my head explodes. I unplug them, and I have normal volume range with the external speakers.
    Anyone has that problem too??
    thanks

    Anthony,
    Have you learned anything more about this problem? I have the exact same issue. Headphones that work fine on an older Macbook Pro are deafening on the new (Mar. 2008) model.
    I haven't had time to go down to an Apple store and see if it is the same on all machines.
    Eric

  • MacBook Pro starts by itself when I plug magsafe

    I have a MacBook Pro 2.33. It was working perfectly until a few days ago. Now, when I plug the power adapter, it starts by itself even if the display is still closed.
    Any thoughts? Thx

    I just noticed now that it also ejects the cd... im clueless

  • I have the 'new' iPad and it won't charge when I plug it into an electrical outlet.  It has been charging fine up until last week.

    I have the New iPad and the last two times I went to charge it overnight, it didn't charge.  I tried moving the charger to a different outlet and it would click to indicate that it was charging and then it would stop.  Finally, it did charge, but today it just won't begin to charge.  Is this a common problem?  Very frustrating after paying the big bucks to get the latest iPad. 

    There are probably three reasons your ipad might not charge:
    1. The outlet is. It good. But you've already changed outlets so that may not be the likely cause. Just to be sure double check the outlets with another appliance to make sure the outlet has power.
    2. The charger is bad. First make sure you are using the charger that came with your iPad. Then double check all your connections.
    3. Your connector on the iPad may have dirt in it. Blow the dust out and try again.
    If none of these work your iPad may be falty or you may need a new charger. Goto a apple store and have them check out your hardware.

  • Why does my mac book pro screen go black when it goes to sleep and then will not light up again unless I unplug the power cord

    When I either leave my mac book pro open, but idle long enough for it to go to sleep or close the top and put it to sleep, the only way to light up the screen again is to diconnect the mag. connect power cord. Any ideas why and/or how to  correct this problem?

    So this is what I got when I took my computer into the apple store to have it diagnosed.
    After the apple technician performced several tests, the only thing that fixed the issue was an SMC reset. Based on this he figures it is probably a software or firmware issue that is going on. He is a little concerend how ever that the fans of the comupter don't reach maximal rpm when the computer is displaying the issue. So he recorded the problem, and told me to just perform the SMC reset as needed for the next couple months and wait for a new update from apple. If the issue persists I am to go back to the apple store and they will take the appropriate steps.
    He said an SMC reset doesn't hurt the computer in any way, so its safe to do. I am gonna contact blizzard and let them know about the issue as well because if it is software, it could be their game (Diablo 3) that is causing the issue as well. If I hear of anything new i will let you know. So get on the blizzard form and let them know of the issue to fix the problem faster.
    Thanks for your help,
    Tetrault

  • My iPhone 4 won't turn on. I have been recharging it for more than an hour. What do you suggest i do?

    My iPhone shut off and won't turn back on. I haveyd recharged it for over an h
    our. Any suggestions to restart it?

    Keep iPhone on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start. This can take 20 seconds of holding both buttons while on charger.

  • Phone won't charge when I plug it in. Anyone else with this issue?

    Not sure if this has anything to do with the new download, but Thursday I downloaded the '08 updates (yeah...I am slow getting to it), anyway... while I was downloading the updates, my phone of course was charging from the computer. After the download was finished I turned my phone off and plugged the phone into the wall charger. Charged fine... well last night (Saturday) I had to recharge my phone, but once I connected my phone to the wall charger it would not respond and/or start charging. Tried to plug it into the computer and it said my USB port was overloaded. I was ticked... needless to say I tried again this morning with no luck. Left my phone off for a few hours still nothing. Called tech. support and the guy asked me to try it again on the computer and read what the error said to him.....low and behold it started charging... on the pc and then on the wall charger. I have no idea why it started to work. I was happy it did, but has anyone else had this issue?

    Odd problem, but there are all kinds of problems with the wall chargers. If you want a new one, make an appointment with your local Genius Bar at the apple store, bring in your misfunctioning one, and they will swap it out for a new one. They do this routinely for charging bricks, sync cords, and headphones.

  • I have a gen3 iPod touch.  It shows the battery charging when I plug into my PC, but will not show as an extra drive in "my computer" and won't show up in iTunes either.  Can anyone help please?  I have exhausted all "help" options.

    I am trying to get my iPod touch (3rd gen), to show up in "My Computer" and in iTunes.  I am using a usb cable and it is connecting okay, because the battery is charging.  It won't show up as an external drive on my computer, and nothing in iTunes either.  I have used the exact same usb cable and plugged into the exact same usb port with a different iPod touch without having this problem.  I have swapped them back and forth and it seems to be a problem with this particular iPod, because the other shows up just fine.  I have already downloaded and installed the latest iTunes update, and I already restarted the computer afterwards.  The other iPod is a 4th gen touch, but that really shouldn't matter.  I would greatly appreciate anyone's help on this matter.  I know that I can't be the first person that this has happened to.  Thanks.

    Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
    As per the forum term of service you can't get help here.  Use google.
    that's the downfall of jailbreaking your phone.

Maybe you are looking for

  • Swap image not working in CS3

    I have used the >insert>rollover image in CS3 to create rollovers for the website below. I can't get any rollovers to work in preview or live on the server. Any ideas? http://www.gardenclubofwindham.org/test.html - it should have a little trowel show

  • Can Acrobat be made to verify one form field against another?

    Here is an interesting problem, and I'm wondering if Acrobat has the functionality to solve it. The sales department is holding up application processing time.  They either forget to fill in blocks of information, or they misspell the buyer's name (B

  • MFBF -Max no.of FI items reached -issue

    hi, While doing production posting through the transaction code MFBF the following error is encountered "Maxium no.of FI items are reached " the error description is  as below what to be done , please provide inputs ? Maximum number of items in FI re

  • Issue with new folder but no name

    I just downloaded some apps and wanted to put them together in a folder, so I did what I normally do - drag one on top of another.  The folder was created but it has no name nor is there a place to enter one.  I've never had this happen with this iPa

  • Block stuctue & storage type search

    Hi all,   1. In case storage type (SUT managed ) with bulk structutre for e. g. For tote the block structure is defined as   12*6=72 For pallate its defined as                           2 * 1 = 2 Now ,   Does the system allow Keeping the tote of  72