My MacBook wont load Mac OS X, just keeps chiming repeatedly

I had Firefox and iTunes open on my MacBook. I went downstairs to get a snack. When I came back upstairs, my MacBook was frozen. The mouse wouldn't move, so I held down the power button to turn it off. When I turned it back on, it got to a blank blue/gray screen, and it chimes repeatedly every few seconds or so. I tried sticking the Mac OS X Install Disk in, but it will not boot off of it. I've read many different posts and articles, most of them tell you to press a button or a combination of buttons after you hear the chime. Nothing works, it just keeps chiming, waits a few seconds, and then chimes again, over and over.
Is there anything I can do without having to drive to an Apple Store? The closest one is about 2 hours away.

Hi, and a warm welcome to the forums!
Let it cool down then try holding the Option key down from the gitgo.
Slso try an SMC reset...
http://support.apple.com/kb/HT1543?viewlocale=en_US

Similar Messages

  • TS1398 My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. What can I do to fix it?

    My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. Again it just gives me a loading sign and the wifi symbol wont come up.

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My macbook wont load passed white screen

    My macbook wont load passed white screen

    reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
    you will have to buy a new drive and simply restore to that drive from the backup.

  • After my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

    after my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

    Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
    You can these suggestions. One might work for you.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

  • I downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    Syncing shouldn't trouch you photos unless you have photos in a Photo Library album.  These would be photos that were synced to your phone from your computer.  If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
    If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically".  Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
    Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141.  To follow the steps, first open iTunes and go to View>Show Sidebar.  Also, Transfer Purchases is now located in File>Devices.

  • My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

    My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

    If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
    Thanks to leonie for some information contained in this.

  • I bought the Snow Leopard Update but now my macbook wont even accept the DVD and keeps ejecting it. This is the same for all DVDs.

    I have a very old (refurbished, bought over 4 years ago) macbook pro 15". It's been running ok on OS X 10.5.8 until very recently. It started ejecting disks, and then the new adobe flash player update wouldn't work. Lots of other little things have been happening as well.
    I had been considering buying a new macbook, but one of the Apple store people suggested I update instead (a much cheaper alternative!). So I bought Snow Leopard, and it arrived in the post today. But now my macbook wont even accept the dvd. It takes it in, whirs and complains a bit (for less than 60 seconds) then ejects it again. I have tried cleaning the disk, cleaning the disk area with a credit card + lens cleaner (a trick I saw recommended on this forum). But no luck.
    Any advice?
    I am a trainee teacher and actually will be gutted to have to get a new laptop (as I really cant afford it). BUT obviously if I have to I will. I just need to extend the life of this one for as long as possible, until I have more money to get a better one!

    Bring your MBP to an Apple store genius bar and see what they say about your MBP optical drive. 
    Look on the OWC web site.  They sell optical drives for older MBPs.  Perhaps there is one that will fit yours.  Installing one is not brain surgery.
    Otherwise examine the iFixit.com and Powerbookmedic.com web sites for replacements.
    Ciao.

  • My ipad wont recognise my wireless, it just keeps spinning round and round

    I had problems with my laptop and its connection. I got a message that another device was using the same IP address so it threw me off the system. I rebooted my house wireless system and the laptop was fine again, as were all the other devices that use it - iphones, desk Macs and the other iPad, but my iPad wont work. It shows the wireless but doesn't seem to be able to hook up to it, it just keeps that searching circle going.
    thanks

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT5457 I tried to update my iPhone 3gs over phone service and now it shows the apple logo like I just turned it on. Then the screen goes black. And it just keeps on repeating. So what do I do?

    The Apple logo just flashes on and off and that keeps on repeating what do I do?

    Plug it into a computer running iTunes and restore it.    

  • I just downloaded my Leopord onto my Macbook and I can't get into my Gmail account. It almost loads all the way and then stops. Also Facebook wont load all the way or keeps reloading and wont stop. The whole page never loads.

    My computer isn't loading everything fully on Safari now. I can't get into my Gmail. It just stops loading.

    Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
    2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
    80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

  • My macbook wont turn on. It just get stuck on a white page with the apple logo. WHen I tried rebooting it there was an error in the loading drivers as well as safe booting it. What should I do?

    What should i do

    Insert the install disk and boot from it. Use disk utitlity to repair your drive and check for errors (report any errors back here) then reinstall the os. This should not erase your data.

  • Keynote for macbook wont load

    Hi
    I want to create and edit keynote decks on my old macbook running Mac OS X 10.6.8 but itunes store wont allow me to download.  What am I doing wrong? where should i get the right version and what versionn is that. Do I need an older version or is it just a no-no on my old machine?

    Snow Leopard is not compatible with the latest version of Keynote, version 6.
    Try ebay for iWork 09, which contains Keynote.

  • Macbook wont load!!! CMD+R doesnt work!

    Hi!
    I just tried updating to OSX Yosemite, however halfway through the installation the Mac displayed a notice stating "an error occurred" and restarted.
    Since then i have been unable to boot up my macbook. If i try to boot normally it just gets stuck in a startup/shutdown loop, displaying some text suggesting kernel panic. If i hold down CMD+R, a prohibitory sign displays until i manually turn the macbook off.
    I have tried:
    Resetting PRAM,
    Resetting SMC,
    Starting in safe mode (will not boot),
    Any help will be greatly appreciated!

    Hi Makksta87,
    If you are having an issue with being unable to start up your Mac and have been unable to boot to Recovery, you may need to boot to Internet Recovery. See this article -
    OS X: About OS X Recovery
    Note that an active Internet connection is required to do this. Also note -
     Starting up from this system performs a quick test of your memory and hard drive to check for hardware issues.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My Macbook wont load past the apple screen.

    ok so I have a macbook from late 2007 and it's not loading past the apple screen. Yesterday it froze so decided to turn it off and it hasnt started up since. Ive tried safe mode, resetting the NVRAM/PRAM, and then i decided to restart it and press command v and a screen popped up saying.
    npvhash=4895
    PRE enabled
    64 bit mode enable
    darwin kernel version 18.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/release_1386
    vm_page_bootstrap: 246299 free pages and 15845 wired pages
    standard timeslicing quantum is 10000 us
    mig_table_max_displ = 73
    AppleACPICPU: Processor Id=0 LopicId=0 Enabled
    AppleACPICPU: Processor Id=1 LopicId=1 Enabled
    calling mpo_policy_init for TMSafetynet
    Security policy losded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Quarantine
    Security policy Loaded: Seatbelt sandbox policy (Sandbox)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University for Californai. All Rights reserved.
    MAC Framework successfully initialized
    isong 5242 buffer headers and 4096 cluster 10 buffer headers
    IOAPIC: Verdion 0x20 Vectors 64:87
    ACPI: System state [so s3 s4 s5] (s3)
    PFM64 0xf10000000, 0xf10000000
    [ PCI configuration begin ]
    PCI configurstion changed (bridge=1 device=1 cardbus=0)
    [ PCI configuration end, birdges 4 devices 17 ]
    AppleIntellCPUPowerManagement: (built 16:44:45  Jun  7 2011)ninitialization complete
    mbinit: done (64 MB memory set
    for mbuf pool)
    FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001cb4fffe8bb384; max speed s400.
    rooting via boot -uuid from /choosen: 49342205-A733-3921-9F2C-4D88EAA7EB64
    Waiting on <dict ID="0"><key><string ID="1">[0Resources</key><string ID= "1">I0ResourceMatch</key><string ID= "2">boot -uuid-media-</string></dict>
    com.apple.AppleFSCompressionTypeZlib Kmod start
    com.apple.AppleFSCompressionType L\load succeeded
    appleIntelCPUPowerManagementClient : ready
    Got boot device = IOService:/AppleCPIPlatformExpert/PC1000/AppleACPIPCI/SATA@1F ,2/AppleAHCI/PRT2@2/I0AHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice /
    IOBlockStorageDriver/ST980811AS Media/IOGUIDPartitionScheme/Untitled 102
    BSD root: disk0s2, major 14, minor 2
    [Bluetooth: :CSRHIDTransition] switchToHCIMode (legacy)
    [Bluetooth: :CSRHIDTransition] transition complete.
    CSRUSBBluetoothHCIController: :setupHardware super returned 0
    AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
    AppleYukon2:RxingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
    disk0s2: 1/0 error.
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [ErrType 10] [ErrNo 5] [10Type Read] [PbnukNum 50624960] [LblkNum 8] [FSLogMsgID 142858201] [FSLogMsgOrder First]
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [Path /usr/lib/dyld/ . .namedfork/rsrc] [FSLogMsgID 1462858201] [FSLogMsgOrder Last]
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtilsKern.c :344: VNOP_GETXATTR com.apple.ResourceFork for /usr/lib/dyld: 5: error
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Compressors/Type4/Compre ssorType4Imp.c.304: fh_getxattr /usr/lib/dyld: 5: error
    /SoundCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtils.c:223: supplyChunk: error
    decmpfs.c:1149:decmpfs_pagein_compressed: err -1
    CODE SIGNING: cs_invalid_page(ox7fff5fc22000): p=1[launchd] clearing CS_VALID
    Sleep prevented by SB 1, SS 0, RS 1

    reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
    you will have to buy a new drive and simply restore to that drive from the backup.

  • Desperate! My macbook wont load up?!

    Hey, I'm new to this forum.
    Right basically my macbook has decided not to start up today. I turned it on in the morning and it said to upgrade this piece of software for ipodtouch/iphone called simplify, so i clicked upgrade and suddenly its froze, I could still move the mouse but couldn't click anything so I forced shut it down and when i went to restart it, it wouldn't load up. It goes the the grey screen and then a couple of minutes later a folder icon appears with a '?' inside it. Can Some one tell me what this means and how can i fix it please.
    Its got all of my college work on it which I really need for tonight!
    All suggestions will be grateful, Thanks
    I'm running tiger

    Welcome to Apple Discussions!
    This either means the directory is damaged, the hard disk is too full, or the hard disk is dying.
    In the future always backup your data before applying any update.
    Its got all of my college work on it which I really need for tonight!
    Unless you backed it up before you installed the software, you aren't going to be able to get back tonight. You may be able to restore it, but you'll need to get additional software such as Prosoft Data Rescue, Subrosasoft Filesalvage, or Boomerang's Boomerang and a Firewire external hard drive at least as big as your internal drive by http://www.macsales.com/ or another reliable vendor that has bootable versions of their hard drive for your version of Mac OS X.
    My backup FAQ* may offer you some alternatives:
    http://www.macmaps.com/backup.html
    Once you are backed up, you may be able to repair your direcrory*:
    http://www.macmaps.com/directoryfaq.html
    If that doesn't work, replace your internal hard drive.
    - * Links to my pages may give me compensation.

Maybe you are looking for

  • How to start streaming from server side after applet initialized on client

    Hi, I am using JSP for on demand streaming server. I have included an applet in jsp page which start new player on client side after on streamreceive event. But my problem is how to give call to server that applet on client side has been initialized

  • Org Modeler 3.0 : Hierarchies - how to turn off employee listing

    Hi, I'm in Org Modeler 3.0 In Source Org Chart -> Hierarchies -> Org Structure, there are 2 position and employee. We only want to show Org Unit and Position in the View, thus, we need to turn off Employee. However, there is no enable / disable butto

  • Error calling a method of the tree control in BDC

    I'm connecting two systems Iplan(project management tool) with SAP PS using SAP XI. I've written an BDC(RFC) to assign people for the activity in an project(cj20n) it works fine in the foreground. But it doesn't work in the background.It doesn't give

  • Direct Path Insert into temporary table

    Hi, I made the following experiment (temp_idtable is a temp table with a single column id, V_PstSigLink is a complex View): 14:24:28 SQL> insert into temp_idtable select id from V_PstSigLink; 17084 Zeilen wurden erstellt. (in english: rows inswerted)

  • Safari is not showing any "Images" on any site.

    e.g. on google the images that accompany an article are not shown. only the outlined box.