My Nokia X6 says - "accessory not supported" whene...

My Nokia X6 says - "accessory not supported" whenever i insert my earphones (Came with its box!)
They used to work fine before! I just listened to some songs an hour ago!
One more change is that there was an icon by the side of battery indicator (looked like an arrow coming out of a box from above) which is not there anymore!
Any help? I tried restoring default setting but got nothing.
Nokia x6

there is no virus try hard reset back up your data
Switch-off the phone (Remove the battery and re-insert it, if necessary). Now Press and HOLD the GREEN (Call) key, RED (Call end) key and the Camera-capture key SIMULTANEOUSLY. While still pressing the above three keys press the power On/Off key, hold them until phone boots up.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • TS1363 Mac says "Accessory Not Supported " when I plug in my New Nano?

    I get the above Message when I pluf in my Nana. And Ideas for Resolution?

    Have you tried another USB port or USB cable to see if that makes any difference?  Is the iPod's dock connector port clean and clear or any debris or damage that could be preventing a full and proper connection?
    B-rock

  • When i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    when i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    Hello AliHoward,
    You may need to completely remove iTunes, QuickTime, and other Apple software from your system prior to reinstalling. The following articles (one for Windows XP, the other for Windows Vista/7) detail the removal process. I'll also link you to the latest version of iTunes for Windows (64bit specific installer).
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    Allen

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

    I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
    i am getting the same error with my rf transmitter that i use in my car

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Every time I plug in av adapter to my iPad mini it says accessory not supported my ipad

    I am trying to use my digital av adapter with my iPad mini and it says accessory not supported by iPad

    Are you using the lighting digital AV adapter or a 30 pin digital AV adapter through a lightning to 30 pin adapter?

  • HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

    why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
    Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

    iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
    It couldn't be much easier than that as you don't actually have to do anything more than normal.
    This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
    Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    USB syncing is far faster than Bluetooth.

  • My Ipod says version not supported when attaching to my Honda

    I just purchased a Honda Insight and hooked my iPod up to the USB port and it was working fine.  I brought my ipod inside and hooked it up to my macbook added several songs and may have upgraded the software.  Now when I hook it up to the USB in the Honda it says version not supported.  Is this an iPod issue or is this something that I need to address with Honda.
    Thanks,
    SASGeek
    Falmouth Maine

    What iPod firmware version does the Honda say it will support on the iPod?

  • Sony pj650 says accessories not supported when trying to use Sony ecm-gz1m gun/zoom microphone.

    The sony ecm-gz1m says it is compatible with cameras that have the multi interface shoe but when I plug it in it says accessories not supported.

    Hi duszac,
    Welcome to the Sony Community!
    The ECM-GZ1M microphone is indeed compatible with the HDRPJ650V camera. But the Zoom mode is not going to work. Please detach the microphone from the camera, check the setting of your mic, and change it Gun mode before reattaching it again. We recommend attaching the accessories while the camera is turned off.
    If my post answers your question,,please mark it as "Accept as Solution". Thanks_Mitch

  • Why do I get accessory not supported when plug in my lighning to 30 pin adapter?

    As soon as I plug in my new Apple 30 pin to lightning adapter I get a pop up saying the accessory is not supported by iPhone. What gives?

    Then get it changed at an Apple store mine works fine on a sound dock 10

  • HELP! iPad just started not charging and saying accessory not supported!

    I have tried my normal wall charger and cord from Apple, tried the USB on the computer, changed the cords out etc.
    Just started doing this within the last day.  I have no idea why.
    It is recognized on my computer, however my normal desktop where I back up is down so I don't want to do a restore on it.
    Any suggestions????
    This is the first original iPad and software is up to date.

    I've been getting this problem for a few days now , i've found that if i pull the usb connector back slightly from the socket on my PC it charges fine , push the connector fully in and 'Charging is not supported with this accessory' comes up , i've checked it a number of times ,  i just pull the usb connector back until the charging symbol comes on .
    Be good to know if what i posted fixes anyone elses charging problem , it seems to me that when the 2 middle pins connect inside of the usb plug my phone sometimes doesn't like it , and by pulling the plug back so they don't connect, it then starts charging.
    atb
    Wizard9956

  • Iphone 4 keeps saying "accessory not supported by iphone"

    I have an iphone 4, and have updated it. I can't get to work with any fm transmitters. I have tried the itrip and the belkin tunebase FM live.  Each time the acessory will charge me phone, but will not play music.  As soon as you plug it in a window shows up that says "This Acessory is Not Supported by Iphone" even though the product is made for the iphone. I have made multiple trips to best buy and no one can help me.  How do I get past this error message and get the phone to play music through the fm transmitter?

    I would try cleaning your dock connector.
    There are many threads about this subject and it is possible there is no support for your iPhone in iOS 5 for your particular accessories, especially if they are older versions of an accessory.

  • IPod says "FireWire not supported" when connecting with a USB cable

    Hello all. First post ever. I am trying to connect my Nano (1 gig) to my Windows Vista. (This use to work flawlessly) Whenever I try to connect my iPod to my computer via a USB cable, it says "FireWire connections are not supported please use USB cable provided blah blah..." It is strange because I have never used anything but a USB cable with my iPod. I've tried everything, resetting via Menu + select, putting it in Disk mode. Seperate PC's including an XP PC. Anyone ever had this happen to them? Please help!!
    Thank you,
    Ben Roughan

    This message appears to be a hardware issue, and cannot be fixed; the iPod likely needs to be replaced.
    (19692)

  • Why does my macbook pro keeping saying it is not supported when I try to connect it to other devices?

    My macbook pro keeps saying its not supported when i try to transfer images and stuff from my macbook pro to my iphone 4. What do I do?

    First, put your images into iPhoto or into a separate folder. Open iTunes and connect your phone. Select the iPhone under the Devices section of iTunes' sidebar. Click on the Photos tab in iTunes' main window. From the dropdown menu you can select iPhoto or some other folder from which to sync the photos to your phone.

  • N8 "Accessory not supported" after music player up...

    Hey!
    A week ago i updated my Nokia N8's music player, but now my earphones aren't working.. Not only mine, but any.. When i plug them in, N8 says "Accessory not supported".. What should i do? My phone is updated to Belle.
    Thanks..

    Hello,
    Try to plug it very slowly
    or
    Hold the microphone button while you're pluggin it 

Maybe you are looking for

  • Tax calculation on sales order and invoice is different

    2007A, SP0, PL49 The tax on a sales order does not match the tax on the linked delivery and invoice by 1 cent. We take payment based on the sales order amount as the delivery and invoice are done after the fact. Why is the tax calculated differently

  • Adding a UNIQUE Constraint to an existing table

    Hi, I got this issue because of the existing data. My issue is in my table I want to add a unique constraint to two columns but i cannot add this becuase of the existing repeating data. And I cannot do a data repair to fix the repeating data since th

  • How to set Current Date as default date in the form?

    Hi , I have a date field and in the form I need it to be 'Current Date' as defualt. How do I get it in Portal?? Thanx swati

  • Exported iMovie audio out of sync by 1-2 secs?

    Hello, I actually have two questions that are sort of related (both dealing with odd audio glitches in the final exported iMovie): I just completed piecing together about 30 clips into a 55-minute movie. While I was watching the movie last night with

  • How to restart the device programmatically?

    Hi all, I want to restart the device programmatically. How to do this? Please help for me. Thanks, Karthik