My phone is disabled it shows connect it to itune when i connect phone to itune it shows this in my pc to allow access, please respond on your iphone but there is nothing in my phone
my phone is disabled and it shows on the screen disabled and connect it to itunes store but i connect to itune store (to allow access, pease respond from your phone) but there is nothing in my phone, can you please kindly help me regards.
thank you
best regard
Hi I really appreciate your replay,
but unfortunately it doesn't helpful to me as I previously applied this ,
the main thing is if you can kindly help me through, I have erase my phone from find iPhone but it will erase once it connect to Internett,
when ever I connect phone to iTunes I got one message on the screen of my laptop the message is (do you want to allow this computer to access information on ali phones)
If you don't allow access, you will not be able to manage sync your phone with this computer.
but sadly how I can allow because there is nothing coming on my phone screen. There is just iPhone disable connect to iTune just on the screen
and there is slide for emergency instead slide to unlock,
so this thing if you can help me through it will be very thankful,
anyway I'm still appreciating your kind replay.
just one thing please how can I allow access to my computer or show me the I tune where doesn't ask this question
thank you
best regards
Similar Messages
-
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
my iphone says it is disabled, to connect it to itunes. I did and ask to allow access, and to respond to my iphone. Well nothing has happeded and im still locked out of my phone.
Put the device in DFU mode (google it) and restore.
-
As the title says, this is a brand new iPod touch bought from a store, I plugged it in a commenced the "setting up" process through iTunes on may iMac. It got to the stage where it said allow this computer to access the device (or something along those lines), i clicked yes, and then a message came up "to allow access, please respond on your iPod touch. however the ipod screen is black, and pressing the buttons doesn't work. How can i fix this? or do I need to return it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad is disabled, connect to iTune, but when i connect to iTune, iTune showing to allow access please respond on iPad. but in long time it is not showing on device list of iTunes.
can any one help me.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
windows 8.1 itunes wont recognize ipad
https://discussions.apple.com/thread/5697247?start=0&tstart=0
Look at the solution in this link
https://discussions.apple.com/thread/5697247?start=75&tstart=0
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
iPad- on all Yahoo pages the mail icon with the red number indication shows email. When I tap, it asks me to sign in again. I do. It takes me to yahoo mail but there is nothing. All the folders are emptied. All my mail is either read, trash, or deleted. Also, when I tap on the mail app on iPad home page, gmail is no problem but for yahoo I get error: no password for yahoo. Go to Mail Account Settings and enter password. I'm stuck. Suggestions? Thank you.
Ask and you shell receive.....lol
Go to your Gmail account in the browser.
Hit the folder icon that brings up the folder selection.
Scroll down to the bottom and select desktop version.
The broswer will refresh and bring up your gmail account as though you were looking on it on the computer.
The go to the upper right corner and select settings.
Then go to forwarding and pop/imap
Go look at pop download
There you'll find 3 numbered lines
Go to 1. Status
And select enable pop for all mail
Then save the settings
Once you have done that you can go back to BlackBerry device settings and sync your mail or wait for it to sync it's self.
Let me know how it works out.
I just did it and it sync within minutes. -
Basically I was being cocky and I changed my password and now I can't get back in. I've tried to do it 11 times and now it's just telling me it's disabled and I have to connect ot iTunes. However, the computer that I ususally use has broken and it won't be fixed for a week or two and I need my phone so I downloaded iTunes on another computer and plugged it in but it tell's me to respond on my iPhone but I cannot because I have to unlock my phone to do that. Is there anything I can do. I have tried to go through Documents but it's not working. I'm bascially lost without my phone.
Hi Ethan6661,
Thanks for visiting Apple Support Communities.
If you do not have access to the computer you normally sync with, it may be necessary to use one of these methods to erase your phone and remove the passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Best,
Jeremy -
I just updated itunes to 10.6.
Windows. Vista. (up to date)
Everything is the library has gone - no apps, music, videos etc.
Playlists have gone.
Everything on the iPhone is still there.
I can't sync because everything will then get deleted from the phone and replaced with the (empty) library.
How can I get it all back to normal?In the course of your troubleshooting to date, have you worked through the following document?
No content shows up in iTunes after updating -
Itunes on maCBOOK CONNECTED TO CART SAUS PLEASE RESPOND ON YOUR IPAD
I have been trying to use configurator to manage the Ipads for our school, however I never seem to be able to reach all the Ipads connected. As of right now all of the Ipads are in restore mode and the MacBook is saying please respond on your Ipad, but the Ipads only have pic of Cord and Itunes Icon. Any ideas?
Yes, it look like that, but I dont have keyboard, and I never had it before.
Nothing happen if I click on that bar, nothing blinks, really nothing.
I tried clicking on every milimeter, click by click, in case that button is transparent or hidden, but nothing.
Thanks on reply -
my phone does not appear in itunes when i connect it
Hi shandarfromdu,
Thanks for visiting Apple Support Communities.
If your iPhone does not appear in iTunes, the troubleshooting steps in these articles can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Best,
Jeremy -
my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start
Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.
-
iTunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this? You used to be able to swipe and delete a song straight from your phone but I can't seem to do that anymore.
That is stealing.
-
my phone goes in to recovery mode and flash logo connect to itune, when i connect to itune the msg disply update software and i click that than dwnld software to itune, when software dwnld and installing to my phone after sometime msg disply "errore no. 21" and software not install to my phone
From TS3694:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
my ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty
Place the iPod in Recovery mode and then restore
-
I updated my iphone4 to the 7.0.4 update. on my phone screen it says connect to itunes. when i connect to itunes my phone isnt doing anything. what do i do? i cannot use my phone!!!
Hey vsu16,
Does iTunes recognize your iPhone at all? It sounds like this is the image you're seeing on your screen to connect your phone to iTunes:
If that looks right, you'll want to follow along with the steps in here;
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Welcome to Apple Support Communities!
Best,
Delgadoh
Maybe you are looking for
-
Goods receipt and material master
Hi, in goods receipt is there a field where is possible to look the expiry date for a material ? In material master is there a field like this ? Regards
-
Query with a hidden key figure
I would like to build a query which will include just one key figure which will be hidden is this possible? Thanks
-
Hello One of our customers specified in his contract a conditional payment term. The payment date has to be the latest one between two dates. My question is : is there a possibility in SAP to create this kind of "conditional" payment term ? Regards S
-
Hello, I have had iTunes for some time and just recently got a iPod. I have reinstalled iTunes and i went ahead and uninstalled quicktime. This has created an error when I click on iTunes. I uninstalled both quicktime and iTunes and even installed wi
-
UK Resellers and going from CS5.5 to CC
Morning all, I am coming at the change to CC from two perspectives. One as an employee of a large organisation, and one in my capacity as a freelancer outside of that job. In both capacities we/I run CS5.5. I am currently researching into the move