My phone was sitting on the table, with nothing turned on, and all of a sudden it sounds like there is air coming out of my speakers.

My phone was sitting on the table, with nothing turned on, and all of a sudden it sounds like there is air coming out of my speakers. It does this for 1 minute straight, then will stop. When I pick it up, then set it back down, it does it again.
HELP!!!

No nothing will show up on the screen.. If I push the 'home' center button it continues doing it, same with the sleep/wake button.
I thinking it may be static out of my speakers --but I don't understand why all of a sudden it is dong this. I have had no problems with this phone, until now.

Similar Messages

HT1414 I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognise

I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognised can anyone help

See this:
iPhone and iPod touch: Unable to restore

TS3694 i recently purchased an iphone 3gs every time i try to update it keeps failing and getting error 1015.the phone was purchased second hand so know nothing about its history .all i get now is pic of usb and itunes logo.we went on itunes and now wont

i recently purchased an iphone 3gs second hand .wanted to use i tunes and whatsapp but kept saying need to udate to lastes firware or what ever so went on itunes to update. update started but keeps failing now phone wont work at all .all we get is either apple logo or pic of usb and itunes logo.andy help would be gratefully recived only had phone a day.has sony experia and wanted to change to apple and fist time its now useless.

Sorry to be the bearer of bad news, but the iPhone 3GS can only be updated as far as 4.2.1
Requirements for WhatsApp are iOS 4.3 or later. This app is optimized for iPhone 5.
As noted here > WhatsApp Messenger for iPhone on the iTunes App Store
So that app cannot run on the iPhone 3GS.
I stand corrected but apparently you may not be able to update the device regardless.
Message was edited by: CS

Ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H

HT2101 my i phne was exposed to a little water and then i put it under a table lamp to ensure ebvaporation of water . During this the phone was switched off. Later when i turned the phone n , it worked pine for 5 min and then the temp alarm came. Need hel

Hi my iphone showed signs of moisture in camera area and so i kept it under a table lamp for a few hrs after switching off the phone. Later the moisture was gone so i switched on the phone and after 5 min of perfect operation an High temp alarm came. Every time i switch off the phone works fro 5 min and ten gets the alarm. How can i get my phone back to normal?

Thanks for the reply, just being positive as the phone turns on fine and every thing works ok for 5 min and then the temperature alarm comes on. I am hoping that the issue may be limited to a perticular temperature sensor etc.
I have got the phone opened and there was little water signs that have been cleaned with alcohol but the issue remains the same. I believe that the temp alarm is caused due to the phone being kept under the table lamp which raised the phones temp beyond the acceptable range and hence may be damaged one of the temp sensors. Heard that there are around 5 different temp sensors in the iphone. If any one has more knowledge please advise on how i can get this fixed.Thanks.

Yesterday I was pushed into the sea with my Iphone 5s in my back pocket, as I got out I took my phone out of my pocket and it turned itself off. I have tried many ways but still is unsuccessful and wont turn on, what shall I do?

I was pushed into the sea with my iphone 5s in my back pocket, I got out and pulled my phone out of my back pocket and it turnt itself off. I went straight home and tried using a hair dryer but was unsucessful, put it in rice which also failed and i left it screen up on the radiator over night but still wouldnt turn on. It has charge on it although i still tried plugging it in to give it power and still was unable to power up. Can anyone give any suggestions on how i can fix it as for its not even 2 months old.

Watamu wrote:
Try putting it in rice for a few hours. It does sound daft but it did work for mine
If you're going to put a phone in rice (not daft at all, the rice acts as a dessicant), it needs to be for a few days, not a few hours. The OP stated in their post that the did put it in rice. In addition to the liquid damage, salt water is also much more corrosive to electronics than plain water. The rice won't help with the salt.

I was thrown in the pool with my phone in my pocket. I was in the pool for a minute or two. I got out dried it off and stuck it in rice. Is there any hope for my hope? If not, is there a way to fix it?

I was thrown in the pool with my phone in my pocket. I was in the pool for a minute or two. I got out dried it off and stuck it in rice. Is there any hope for my hope? If not, is there a way to fix it?

alanfromwickford wrote:
just to add, i'd remove the back case to allow mor rapid drying, but expect the wosts - because it's less disapointing if you then lucky
What a colossally bad idea! To anyone reading this thread DO NOT DO THIS!!! Once anyone other than an Apple Authorized Service Provider (and that doesn't automatically mean your carrier, just FYI) opens up the device, then ALL options from Apple are gone, permanently.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

The steps would be :
- Add files from file menu > select pdf > add to site
- Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
- Select the file you want to link
Thanks,
Sanjit

My father's iphone will not boot. We live in Barbados but the phone was bought in the US. Is there any way to fix this, or does he need a new phone, and is this covered by warranty?

My father has owned his iphone for almost exactly 9 months. The phone was purchased in the US when he was on holiday. We live in Barbados, but the phone should still be under warranty. (please correct me if I'm wrong). He says the phone will not boot, it is inconsistent with showing how much battery life it has and it keeps looping because it's always trying to reboot. He treats his electronics very well and the phone is in perfect condition. Is there any way that this can be fixed without him losing all the information on the phone? Or can he get a replacement phone (due to the warranty issue)?

Have you tried any basic troubleshooting
restart
reset
Restore
See user guide
http://manuals.info.apple.com/en_US/iphone_ios5_user_guide.pdf
assuming iPhone is still using iOS 5.0.1

Import the table with 0 rows

Hi
I have a problem to import a dump that contains the tables with 0 rows.
When i exported from ORACLE 11.2 64 bit on SERVER 2008 i noticed that log didn't confirm the tables with 0 rows.
When i want to import to ORACLE 11.2 64 bit on other SERVER 2008 i have a lot of errors on this tables with 0 rows.
In the log i get the same tables with 1 row at least, but no one with 0 rows.
I open my dump in TEXTPAD and i see it contains "CREATE ....." these tables.
I don't understand why it happens. I used FUll DUMP by SYS, it didn't help.
This is not first time when i export and import dumps,no errors.
I'm using command "EXP" and "IMP" and every time it's ok.(IF it's a releavent)
Why it happens? any solutions for this issue?
Thanks

I've found (i guess so) solution to this issue
here are two links to this new feature that is called deffered segment creation
The reason for this behavior is 11.2 new feature ‘Deferred Segment Creation‘ – the creation of a table sent is deferred until the first row is inserted.
As a result, empty tables are not listed in dba_segments and are not exported by exp utility
http://www.nativeread.com/2010/04/09/11gr2-empty-tables-skipped-by-export-deferred-segment-creation/
http://antognini.ch/2010/10/deferred-segment-creation-as-of-11-2-0-2/
And this is i've found in official documentation from oracle
Beginning in Oracle Database 11g Release 2, when creating a non-partitioned heap-organized table in a locally managed tablespace, table segment creation is deferred until the first row is inserted. In addition, creation of segments is deferred for any LOB columns of the table, any indexes created implicitly as part of table creation, and any indexes subsequently explicitly created on the table.The advantages of this space allocation method are the following:A significant amount of disk space can be saved for applications that create hundreds or thousands of tables upon installation, many of which might never be populated.Application installation time is reduced.There is a small performance penalty when the first row is inserted, because the new segment must be created at that time.
To enable deferred segment creation, compatibility must be set to '11.2.0' or higher. You can disable deferred segment creation by setting the initialization parameter DEFERRED_SEGMENT_CREATION to FALSE. The new clauses SEGMENT CREATION DEFERRED and SEGMENT CREATION IMMEDIATE are available for the CREATE TABLE statement. These clauses override the setting of the DEFERRED_SEGMENT_CREATION initialization parameter.
+Note that when you create a table with deferred segment creation (the default), the new table appears in the _TABLES views, but no entry for it appears in the SEGMENTS views until you insert the first row. There is a new SEGMENTCREATED column in _TABLES, _INDEXES, and _LOBS that can be used to verify deferred segment creation+
Note:
The original Export utility does not export any table that was created with deferred segment creation and has not had a segment created for it. The most common way for a segment to be created is to store a row into the table, though other operations such as ALTER TABLE ALLOCATE EXTENTS will also create a segment. If a segment does exist for the table and the table is exported, the SEGMENT CREATION DEFERRED clause will not be included in the CREATE TABLE statement that is executed by the original Import utility.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

HT201407 Dear Apple support! My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the ap

Dear Apple support!
My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
<Personal Information Edited by Host>

All Apple support contact information is on the web site - http://www.apple.com/contact/
If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
http://support.apple.com/kb/HT5787

Why does siri come on by itself while it sits on the table no one touching it?

why does siri come on by itself while it sits on the table no one touching it?

michael jfromtaunton wrote:
why does siri come on by itself while it sits on the table no one touching it?
If you're not running iOS 8 as you describe you are not, and Siri keeps coming on, this could be a hardware failure of the Home Button.
Try these steps:
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Display all the rows in the table with Varray

I created two Varrays
CREATE TYPE phone_varray AS VARRAY(3) OF NUMBER(10);
CREATE TYPE email_varray AS VARRAY(3) OF varchar2(30);
CREATE TABLE ee
(id number(2),
phone phone_varray);
now i inserted some rows into ee table and displayed it as:
SELECT e1.id,e2.COLUMN_VALUE"PHONE NO" FROM ee e1,TABLE(e1.phone) e2;
ID PHONE NO
1 1111111111
1 2222222222
1 3333333333
1 1111111111
1 2222222222
1 4444444444
4 1111
4 2222
4 33334
5 1111
5 2222
5 33334
Then i altered the table with email_varray
desc ee;
Name Null? Type
ID NUMBER(2)
PHONE PHONE_VARRAY
EMAIL EMAIL_VARRAY
I updated some rows:
update ee e1 set email=email_varray('aasda') where id=4;
and when i try to display the table data by:
SELECT id,e2.*,e3.* from ee e1,TABLE(e1.phone) e2,TABLE(e1.email) e3;
it only displays the rows that contain all the details like
ID COLUMN_VALUE COLUMN_VALUE
4 1111 aasda
4 2222 aasda
4 33334 aasda
and not all the rows that are in the table which have id and phone and email as NULL
need help to display all the rows in the table.

will this work for you ?
SELECT e1.id,e2.COLUMN_VALUE as PHONE_NO, null as email FROM ee e1,TABLE(e1.phone) e2
union
SELECT e1.id,null,e3.column_value as email from ee e1, TABLE(e1.email) e3;

Hello Apple ! I have in Iphone 5 16GB WHITE and it have a problem so I send my iphone to a service from my country and they sad that I made a unauthorized intervention and it is not true, this phone was nerver open , the seals was open by the service .I

Hello Apple ! I have in Iphone 5 16GB WHITE and it have a problem so I send my iphone to a service from my country and they sad that I made a unauthorized intervention and it is not true, this phone was nerver open , the seals was open by the service .I think they try to cheating me because when I spoke with them , they answer me very ugly and unpolite and they sad me that they made what they want. So can I sand my iphone to a service from another country because I want to know that they will say the same thing ?I have international guarantee. Answer me soon and thank you for help!

If you can find out what country your iPhone was officially sold in, you could take it there (or if originally sold in the EU, take it to any EU country where Apple officially sells the iPhone) or you could send the iPhone to someone you know in that country who could get it serviced and then ship it back to you. Apple Support does not accept shipments from other countries, and will not ship a serviced iPhone to another country.
This, though, presumes that the iPhone has not been modified as your service provider claimed. If it has, Apple will not provide service for it in any country.
You may be able to find out what country your iPhone was officially sold in by calling Apple Support:
http://support.apple.com/kb/HE57
and giving them the serial number.
Regards.

My phone was sitting on the table, with nothing turned on, and all of a sudden it sounds like there is air coming out of my speakers.

Similar Messages

Maybe you are looking for