My Premiere CC wont always send the audio through Kona

My Premire CC wont always send the audio through Kona card. It keeps wanting to send it through the line out. After several restarting of a project, it will eventually take and send it through the Kona. How can I fix this? Working with Kona LHI in premiere CC on a Mac. Thanks!

Do you have the Kona as as the default output device in Audio and Midi settings in OSX?
Eric
ADK

Similar Messages

  • Can I stream the video to Apple TV, as well as sending the audio through to the sonos play 1 speaker?

    I was wondering if there was a way to stream my movies to Apple TV, which I know how to do, but to send the sound through to my sonos play 1? Thanks in advance!

    I'd like to know the answer to this as well... Hope someone can step in and fill us in.

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

    how come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

    Why? Because something is wrong.
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
    If you can find such a thing.  I really doubt that exists since USB is a data connector not a video connector.
    would allow me to run the audio through my stereo.     
    That would depend on this adapter.

  • HT4437 I was able to bring a Video from Amazon Prime to my iPad, but with Airplay got only the audio through my AppleTv.  Any suggestions to get the video also (from iPad to AppleTv)?

    I was able to bring a Video from Amazon Prime to my iPad, but with Airplay got only the audio through my AppleTv.  Any suggestions to get the video also (from iPad to AppleTv)?

    Amazon Prime reply app does not allow video airplay - nor do several other content providers.
    It must have something to do with digital rights/copyright.
    AC

  • Configuration to send the smartform through fax

    Hi,
    I have used CONVERT_OTF_AND_FAX and SO_OBJECT_SEND FM's to send the smartform through fax.After executing SO_OBJECT_SEND function module,I am getting sy-subrc alue as 9(OBJECT_NOT_SEND).I am able to send the document through fax.But when I click on display in SOST transaction it is just printing the output of the smartform.It is not coming in PDF format.
    The code looks fine.I think there is some problem with confuration settings.Is there any configuration to be done to send the smartform  output through fax?
    Please reply.
    Regards,
    Hema

    Hi,
    Actually,my requirement is to send the smartform output through email with medium 'external send'.I have done some coding for that.it is working fine and I am able to send the smartform through email and open the attachment in PDF format.
    But if the email id of the recipient is not present then the smartform output has to be sent through fax with the same medium 'external send'.
    So I have done some coding to send the smartform through fax when the email id is not present.
    I am able to send the output of smartform through fax.But when I clicked on display in SOST transaction,it is not coming in PDF format.It is coming in RAW format.
    Is it possible to send the smartform output through fax with medium 'external send'?
    Regards,
    Hema

  • HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

    My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • Can you airplay video from iPhone to Apple TV but listen to the audio through iPhone headphones?

    I know this is a very specific use, but my wife sleeps during the day while I'm at home. To keep the house quiet, is it possible to airplay a video on my iphone to the Apple TV, but listen to the audio through my headphones plugged into the iPhone?

    No, you would need to connect the headphones to the audtio out on the TV or strero being used.

  • How to assign a button for attachment and send the data through browser ?

    Hi friends,
    How to convert to browser ?
    how to assign a button for attachment and send the data through browser ?
    Thanking you.
    Regards
    Subash.

    Refer to
    How to create a text box in ascreen painter?
    where another user (venkateshwar reddy) has asked a very similar question...
    Jonathan

  • With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV.  Any way to do this?

    I am trying to get audio to play through the soundbar attached to the TV for great sound.  Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers.  If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all.  The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV.  I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar.  Any solutions will be appreciated.

    its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
    power down your Mac
    connect firewire from camera to Mac
    power on camera and insert tape in camera and play back
    power up Mac
    start QuickTime
    File > Preferences > record tab
    video source - select the camera you have
    sound source - select the camera you have
    quality - select device native
    the video should show in the QuicTime window
    a  green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
    rewind tape and playback
    click on red button to start recording

  • Trying to send the audio of a example.dv video clip as .mp3 through mail.

    I imported a video clip and I need to send just the audio as an .mp3 through an email. The video file is a ( .dv ) How do I do this? Need a quick reply too.
    joshua

    Hi Jomala,
    open iMovie, create a New Project. In File menu, choose "Import" and select your .dv file. It will appear in iMovie as a clip. Put your clip in the iMovie timeline.
    In iMovie, Advanced menu, choose "Extract Audio".
    Close iMovie and save your project.
    Now, if you look in the "Media" folder of this new project folder created by iMovie, you' ll find a AIFF file (I think it's named "voice 01").
    Open iTunes and in iTunes preference, Advanced, set "Importing" to mp3 encoder.
    Drag your AIFF file into iTunes, select it and choose "Convert selection to mp3" in the Advanced menu of iTunes. It creates a new mp3 version of the sound file that you can drag and drop on your desktop then send by email.

  • Iphoto email doesn't always send the mail .....

    I tried again to send a photo directly from iphoto with a few lines of text.
    It looked correct and the 'sending' bar completed the task but the email never arrived at its destination and there is no record of it anywhere in Mail or on my macbook.
    I have been able to email from iphoto before and it has sometimes worked, sometimes not worked.
    Should the mail from iphoto show up in my 'sent' mail box?
    thanks,
    c

    You do not understand - mail is not iPhoto - if yhou send with iphoto hen mail knows nothing about your e-mail - same for sending via Mail
    there is no "sent mail" box for iPhoto
    My personal suggestion is to use mail - set it as the e-mail client in teh iphoto preferences
    Anothe option is to click the box in iPhoto to always send a bcc to yourself
    LN

  • Why is Premiere Pro CS5.5 scrambling the Audio Track on some of my Canon DLSR clips?

    I've recently started editing a Wedding, and realised that in the Source Window the clips audio doesn't match up with the visual - clips play perfectly, but the audio cuts out, is scrambled, and only rarely is in sync with the video.
    This has never happened before. I shot all the video on Canon 60D and 550D. The original clips all play perfectly, with matching audio, in quicktime or any other application when opened.
    I'm editing on an iMac 27" running Mac OSX 10.7.4, with 3.4GHz Intel Core i7 and 16GB ram. I am running Adobe Production Premium CS5.5, Premiere Pro 5.5.2 with all the updates up to date.
    I did import the folder system from Finder into After Effects CS5.5 (in order to keep all the sub-folder system in tact) and then copied them into Premiere, in order to save time. Could this be the cause of my grief?
    Anyone know any fixes?
    There aren't any AIFF's in the project at all.
    Cheers,
    Thomas

    I had the same problem with some footage I shot on Saturday. The footage was shot with the Panasonic AF100, with audio in the LPCM format.
    After I ingested the footage with Prelude, some of the later clips were badly garbled. At random intervals, the audio would "skip ahead" and lose sync. The audio would finish early and the there would be silence for the second half of the clip. All of the early clips were fine, the later ones were garbled.
    I was able to use another take where the audio was fine, but I was certainlty worried. Was my camera malfunctioning? Was it an SD card error? Was it a Premiere bug?
    I finally got a chance to revisit this today. The data was still on the card, so I put it back to the camera and played it back. The audio was fine. So it was definitely Premiere.
    In Premiere, I deleted the Media Cache (Edit->Preferences->Media) and while I was at it I selected "Save Media Cache Files Next To Originals" so in the future it would be easier to figure out which cache files went with which clips.
    After Premiere reconformed the audio, the problem diasppeared.
    I've been using this camera with Premiere for the last year, and have been using Premiere for many years and have never seen this issue in the past.  So I assume it's a new quirk, something we'll have to keep alert to in CS6.

  • How do you attach a scan to the end of an e mail?  when I try it always sends the opened scan document as the e mail rather than as an attached file!

    I have a query.  When I try to send a scanned document as an attachment in mail the scanned document gets e mailed as an open document rather than as an attachment to the e mail.  Any suggestions?

    Some possible strategies for dealing with this include:
    * zip the file (control-click the file, and select "compress") and send the zipped file.
    The recipients email program should display this file as an attached file. But the recipient will have to unzip it at their end.
    * I've never tried it, but people say this can help: Attachment Tamer

Maybe you are looking for