My profile- mobile no. update ?

Not able to update my mobile number in Settings/about phone /Status/My phone number ( showing as unknown). I tried to update my profile in Contacts / Myself - several times . But , still the above status under My phone number is unknown.Can you help ?

This is in relation to your SIM card. My operator in my country also doesn't do this, but where I lived previously, it would display the number.

Similar Messages

Profile picture not updating on bbm

my bbm profile picture only updates on my side but not with other users this has been like this since beginning of January 2013. please can someone assist me

Hi nagelc
Welcome to BlackBerry Support Forums
Which version of BBM you have Installed on your device , you can try reinstalling to see if it reflects any changes. If you have BBM7 then your contacts are stored with BlackBerry ID but if you any previous version then first do a backup of your BBM contacts locally
KB20554 How to back up and restore the BlackBerry Messenger contact list
Once you done with it , Uninstall BlackBerry Messenger from Options > Device > Application Management > Delete BlackBerry Messenger from there . Perform a battery pull restart by removing the battery while your device is Powered On wait a min. then re-insert it back.
After reboot from your BlackBerry browser browse to or click here www.blackberry.com/bbm to download the recent available for your device . After installing see if that helps in resolving your issue.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Mobile Application Update Failed

This update for Dreamweaver failed to update properly from the Application Manager.
The error log states:
Mobile Application Development
Installation failed. Error Code: U44M1P7
In the same dialog box it is suggested that I contact customer support and offers a link. This link takes me to a page to download the "Adobe Support Advisor." However, the program stated there were no errors.
The Adobe Support Chat was of no help at all. They only said they don't support any mobile application updates. Considering this came from Adobe's update manager, I asked why and all he could say was "We just don't. Sorry."
I'm running Windows 7. Anyone know of a way to fix this?

start here, http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
if that fails to help you, the info below was offered by another user as a solution to their problem,
1. Launch any of CC App (Photoshop, Illustrator, etc)
2. Go to the HELP -> UPDATES
3. It will start Adobe Aplication Manager, then UNCHECK ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your updating Aplications.
4. Click "UPDATE" button.

How can I get the Display Profile list to update with new profile names?

Hello
I recently created a couple of color profiles with a calibration device, and I decided to manually rename the color profiles after creating them. The problem is, when I open Displays in the control panel, the new names for the profiles don't show up, only the old names. To get the Display Profile to update, I have to pull the profile out of Library > Color Syncs and restart (which clears the profile from the list), then put the renamed profile back in, restart (which then adds the renamed profile to the list)
Is there an easier way to to this, to get the Display Profile list to update? Is there a preference or cache somewhere?
thanks

Oh, cool! I never handle any Mayan stuff in my job, but many of my academic cohort have done so. Mostly Tzotzil.
Anyhow: your sample font was Times New Roman. If you can't see the combining glyphs, then you're using an out-of-date version of the font, or something else is wrong. . Did you maybe start your work on a contemporary version of Word in WIndows, and now you've shifted to using a Mac with an older version of Office? THere are plenty of nulls in TNR (which are usually codepoints not in Unicode, usually a sign of some kind of hacky workaround on the part ofthe font designer). There should be a real combining macron below right about here, in between the crazy upper Latin and the Greek caps :
So I'd want to know: what font are you using for this? If not TNR, then I'd suggest Gentium. I might even suggest dropping TNR for Gentium. Judging by your screen name, you may well already be aware of SIL. If not - oh hey, they make fonts for people who are in your shoes! Go check 'em out. The fonts are free, and pretty reliable. And Gentium may already have a precomposed with-line-below glyph for your typesetting needs.
The Kerning dropdown lets you adjust the spacing between letters in a letter-by-letter way. Selecting all of your text and picking "Metrics" is the way to go here - unless you are a designer who thinks that the capital D is way too far away from the lowercase i, and want to tweak the kerning manually. "Optical" is for large font sizes where body-text-style kerning is too spacious. Avoid using it at small font sizes.

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Which Server profile in Device update for PR 1.1?

Okay, according to the Nokia website the PR 1.1 update is available for the product code of my Nokia N8 (unlocked, grey, The Netherlands, bought from Nokia). I have no PC so I have to update OTA. However.... In Device updates it keeps on saying 'No updates available'. I find that strange, so I was wondering if there is something wrong with my Server profiles.
I check Server profiles and see 't-mobile' (my carrier) and 'Not configured'. I click 'Start configuration'... and I get 'connection error'.
I'm at a loss. Do I need to configure the server profile 't-mobile', even though I bought my phone unlocked? Or do I need to make a new server profile, and in that case: which?

T-Mobile did the same on their custom firmware for N97 and now I find the same on N8
no server profile   in the end on my N97 i got so fed up i changed the product code and got rid off all the T-Mobile nonsense blote-wear and it got me the Server profile.
I Don't want to hack product code on my N8    in Nokia's online FAQ's is says how to set the server profile but it doesn't seem to work for N8.
I wish Nokia would stop allowing networks to have custom versions. (let them brand by a theme only)
Anyone know the Server Profile settings for N8   ?

Facebook 1.0 mobile app UPDATE? for s60 5th

currently using Facebook 1.0 on my N5530.. updated last year.
any news if there will be update for it?? maybe a NEWER Facebook mobile features??
like adding up timeline on it and BETTER home and profile features.
hope NOKIA can see this.
SALAMAT! (thank you!)

Is this the official one from Facebook? If so you'll need to ask them as they develop their own app.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Mac Mini Profile Manager installing/updating ipad Apps - HELP!

Hi,
i am hoping someone might be able to help with the following.
we have a mac mini server to remote manage 25 ipads using profile manager.
this works well as we can lock, wipe and clear passcodes etc.and attach the policies without any trouble.
However we are trying to push out an app (version 1.4) to the devices and this is sort of working but not fully.
if the app is already installed with version 1.3 it doesnt update even though in profile manager, 'active tasks' it says successful.
if you go go into profile manager and select the device and select 'update info' this registers against the device but still shows as the old version.
if we delete the app from our test ipad and push it out via profile manager it goes in active tasks as successful then the ipad has a pop up message box saying the xxxxxx.ourdomain.co.uk would like to install the app, once this has been ok'd it installs on the ipad ok, but when you select the app it tries to open then goes back to the screen again and never opens the app.
if you download the app direct from itunes it opens with out any trouble.
here is the process i am using.
on the mac mini server.
download the app via itunes
then in apps i drag the app on to the desktop, this creates the .ipa file
in profile manager, select the device, edit apps and browse to the .ipa and upload
select the uploaded app and 'add'
when you save this, then go to active tasks it gets pushed out to the device and reports as successful
then the app either doesnt update if old version is installed or installs if no app is installed but doesnt open
any help welcome
regards
Gavin

Gavin,
We've run into the same issue that you mentioned. My understanding of the Push App functionality of Profile Manager is this:
Pushing apps is designed to be used to deliver In-House developed apps over the air (OTA). Meaning, if your organization develops an app for use on its own devices, you can upload the .ipa to Profile Manager and push it out while bypassing any App Store interaction. The In-House .ipa would contain its own provisioning profile that would dictate who is allowed to run it.
When you download an app from the App Store, the .ipa that you get actually contains the AppleID that was used to purchase/download the app in the .plist. If you then push that app to a device that has never been used with that AppleID, the app will fail to launch as it cannot verify that you actually own the app.
Before we go any further: what I'm about to discuss isn't officially condoned or supported by Apple, which means it is inheritly risky and could be patched over at any time.
In order to bypass the issue, what has worked for us is to sign into the App Store on each iPad with the AppleID that is used to purchase the apps on your Mac Mini. You need to download at least one app to the iPad while logged in with that AppleID in order for the iPad to retain the AppleID after the iPad users log in again with their personal AppleID. After you have done that, users may once again log in with their own AppleID.
At this point, you can push an app to any of those devices that have been paired with your Mac Mini's AppleID at least once. The apps won't (immediately) crash.
Here's the catch: I'm told that the .ipa contains an "expiration date" of sorts. Once that date has elapsed, your iPad will attempt to extend the expiration date by connecting to the App Store to verify that the same AppleID that was used to download the app in the first place is still active on the device. If it is not, the app may once again crash when you attempt to run it. Now, this expiration date or timer is not disclosed, meaning, if this is really the case, you will have no idea when the apps will stop working. It could be weeks, or months, or years. A gamble, really. So, use that at your own risk.
Currently, there is no official method for pushing App Store apps Over-the-air with Profile Manager or any other Mobile Device Management platform.
Remember!: If you are even considering pushing apps in the manner mentioned above, you will still need to account for licensing. As an organization, you must have purchased the same number of copies of an app as you intend to install on your devices. This is a non-issue with free apps, but for auditing purposes, you'd best look into VPP or steer clear of pushing apps altogether.
I hope some of that helped clear up your question.
Good luck!

Recreating Default Server profile for Device Updat...

Hello,
For whatever reason, after hard reset, my 5800 did not have the server profile to check for Device updates. I am eagerly waiting for ver 4 like a lot of other people. I read Device Update FAQ and it shows what appears to be proper Nokia Server Settings for 5800 USA model. I entered it incorrectly and when I check for updates, it gives invalid host error. I think I did not put in a . somewhere. Anyways, I am unable to modify or even view my profiles. When I select server profiles from the options menu, it shows that I do not have any. If I try to create the profile, it says that server ID is already in use.
How do I modify this setting that I can not see with out resetting phone?
Thanks

T-Mobile did the same on their custom firmware for N97 and now I find the same on N8
no server profile   in the end on my N97 i got so fed up i changed the product code and got rid off all the T-Mobile nonsense blote-wear and it got me the Server profile.
I Don't want to hack product code on my N8    in Nokia's online FAQ's is says how to set the server profile but it doesn't seem to work for N8.
I wish Nokia would stop allowing networks to have custom versions. (let them brand by a theme only)
Anyone know the Server Profile settings for N8   ?

HR PA and Planning (PD profile) changes not updating auth profiles of users

PROBLEM:
We are on ERP version 6 since 2008. We started experiencing this problem December last year and now it is all over our system. As soon as employees are transferred or new appointments are made in HR on PA or if the PD profile is changed in planning the changes cannot be seen by the user in their auth profile. The user can literally not see the newly appointed employee on the org structure or even newly created org units and positions are not visible. When RE_RHAUTH00 is run on the user name the update indicates that the changes (new employee and new org unit) is linked.
The following updates run every night: RHPROFL0_DAILY_UPDATE and RHUATUPD_NEW. I have also run PFUD during the day to make sure all updates go through. We have also "played" with some profiles with PD profile changes but it is as if the profile remains completely static. We have looked for personnel lists and deleted them to no avail. Our Basis administrator has cleared the buffer for us and has run report RSUSR405 that did not do anything. We have searched through notes on Support packages and have just loaded and tested support pack 46 to 53. The only work around seems to be to delete the user and create a new user and then it seems to easily accept new changes.

Hi,
Yes, please make it scheduled background job. This is normal procedure.
Define periodicity on your business needs: some run it every night, some every hour.
Cheers

ISE Profiler Feed Service Update

Hey,
I have tried couple of times so far to update the ISE profiler feed service and it always says " it has been successfully update" after 2 seconds; however, last update feed show 2013-05. (see attached) I'm running ISE 1.2 with all patches installed (1,2,3,4,5,6,7) .Does anyone have some idea about this issue? I'd really like to update the OUI database for the new devices and seems to be this is the only automatic way!
Thanks,
Ali

Cisco update the the OUI as they become available but if you are facing issue regarding specific OUI do mention or you can custom define that device for profiling (for short term solution)
Also confirm this information.

Adobe Reader Mobile Android Update for DRM pdfs?

I have had a variety of Samsung Galaxy tablets since 2011, and since then I have been waiting...and waiting...AND WAITING for a solution to this ebook pdf issue. Is there (or will there ever be) an update coming soon which will allow tablets and mobile devices to unlock DRM secured ebooks with our assigned log-in credentials? What is the point of an ebook, if the only place you can use it is on a desktop/laptop computer? It sure would be nice if I was able to use a textbook I paid for on a tablet that I also paid for. Please do not give me the "not at this time" speech. Why isn't there a security update to support this feature?

We are aware of this ask and it exists in our product backlog, but unfortunately is not planned for the immediate future. Sorry for the inconvenience caused.

All pages not listed after mobile me update

When I look under iWeb on my mobile me account, all of my pages are not listed. However, when I go to the sites that forward to those pages they show up. I don't want to republish yet as it may just be a case of the apple servers being slow to finish a complete update.
Any one else with this problem?
Message was edited by: lestudio

lestudio wrote:
I guess I was trying to find out if this is normal or if I am the only one where it shows a partial list.
I think it's normal — you're not the only one! ...You could try getting more info from MobileMe live chat support, which is now 24/7 — see this announcement.

User profile service not updating 'Title' in user information list

Hi,
In our SharePoint farm, following two user profile sync timer jobs are successfully running but not updating the 'Title' in the hidden user information list.
User Profile to SharePoint Full Synchronization
User Profile to SharePoint Quick Synchronization.
Can someone point me to the right direction? Please note that I don't want to use powershell script shown here to update the 'Title' in the user information list -
http://blog.falchionconsulting.com/index.php/2011/12/updating-sharepoint-2010-user-information/.
Thanks,
Manvir
Manvir

Hi,
There are two jobs, User Profile to SharePoint Quick Sync and User Profile to SharePoint Full Sync, that synchronize the User Profile database information with the user information list. Sometimes this stops working (properly) and in that case
you need to run:
Stsadm.exe –o sync –listolddatabases 0
Stsadm.exe –o sync –deleteolddatabases 0
The first command will display all the databases and when they have been sync’d last.
The second command will delete the records corresponding to those databases (it doesn't delete databases/end user data).
Anyways, running this will basically tell the timer jobs that they have never sync’d and force them to carry on as if it’s the first time.
Go to Central Admin and fire off the User Profile to SharePoint Full Synchronization
job.
For detailed information, refer to the following article:
https://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Firefox 4 mobile was updated and now it doesn't open.

It looks like FF 4.0 Mobile received an update and then hung. I restarted my Xoom and tried to startup FF. It hung again at the FF logo. There were no errors. I could not stop the process. FF was unusable and I needed to unistall it. I'm hesitant to reinstall it because It took me awhile to get it configure to my liking.

Sorry about that, and thanks for the report. If you do re-install Firefox, could you let us know whether it starts working again? That may help us narrow down the problem.

My profile- mobile no. update ?

Similar Messages

Maybe you are looking for