My provider is Time Warner , trouble activating channels

My provider is Time Warner cable, iv'e tried to activate some channels like Disney, and when I put in the activation code my provider isn't on the list. What exactly does that mean? Am I out of luck with that channel?

If they aren't on the list then they have chosen not to participate, unfortunately you will be unable to view

Similar Messages

  • Verizon/Time Warner Routing Issue

    I've been having trouble logging on to my email through Outlook, IPad, or IPhone.  The service provider is Time Warner.  Apparently the problem is a routing issue between Time Warner and Verizon and they've had the routing issues for over 2 months and have still not resolved the problem.  Since no one at Verizon seems to know anything about this, does anyone have any information as to when the issue will be resolved?

    I can sign in using webmail and see my email.  But I can't use Outlook, my IPad or IPhone utilities to see my email using TW as a provider.  If I'm anywhere else, using any other provider, I can use Outlook, my IPad and IPhone without any problems.
    When I called TW, they told me the problem was a routing issue that both TW and Verizon were working on and had been working on for at least 2 months, but no solution yet.  They were surprised that no one at Verizon knew this.
    Since everything worked fine until a week ago and nothing changed in my settings and Verizon verified that everything was set up correctly, I'm satisfied that this is the issue.  My concern is that not one Verizon representative has acknowledged that there is a routing problem between TW and Verizon; especially if the problem has existed well over 2 months.  You would think that an issue like this should be shared among all their troubleshooting team.

  • I'm having trouble with "maps" on Macbook Pro, iPad and iPhone.  It shows my current location and hour away from where I am.  As soon as a move iPhone away from my wifi at home to cellular it shows my correct location.  No help from Time Warner.

    What can I do to get "maps" to work on my Macbook Pro, iPad and iPhone when connected to wifi at home.  iPhone "maps" work fine when connected to cellular service. Maps on wifi shows me about 55 minutes away from my current location.  Very frustrating.  I called Time Warne,r my service provider, but they had no answers since they were not knowledgeable of this situation.  Anyone else having problem?  I just updated all devices to newest update.  Is that the problem.

    Did you bring your wireless router with you? If so, it's possible the iPad is getting its location through the router and the router still "thinks" it's where you used to live.
    Try taking your iPad to another location where there is wifi (such as a coffee shop). Then, try an app that uses location services. If it's accurate at another location, then the source of your problem is your router.
    ~Lyssa

  • Since the time warner outage i can not send or receive email.

    SInce the Time Warner Cable outage I can not send or receive any email from my phone. It keeps saying can not get mail. The connection to the server failed. What do i need to do to fix this? Please help!!

    Hey karenfromasheboro,
    Thanks for the question. I understand you are experiencing issues with mail on your iPhone. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage,follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

  • Ubee, airport, time-warner internet

    Hi I am in New York City, using Time Warner cable internet.
    I just upgraded my service and they hooked me up with a Ubee modem/router, which doesn't seem to "see" my Airport router.
    Internet is fine when I connect with ethernet straight to computer, so not a cord issue.
    I don't know how to turn the router function off on the Ubee modem.
    Any thoughts?

    Thank you Xantiaan,
    Yes, I did have the wifi off when I did the test. Although your second suggestion wasn't the answer, it did lead me to the answer.
    I logged in to the website for the DSL Modem using information that came with the Modem box. In my case it was going to, "fritz.box". That's where I first updated the Modem firmware. Secondly, I created a "free port" for the Airport Time Capsule in the Internet options for the Modem. I think Apple was a little overzealous with their instructions for setting up the Airport Time Capsule (ATC)--it wasn't as easy as they say. Anyway, opening up a free port allows a more advanced device such as the ATC to function verses a simple ethernet connection to a laptop. My wifi internet speed through the ATC network suddenly went from 30 kBit/s to 3,000 kbit/s.
    I then followed the provided instructions to add the printer through the Airport Utility but that didn't work either. So I searched a forum that said to simply add the printer again in the System Preferences: Printer/Scanner Section. That worked.
    So for those of you having troubles with your Airport Time Capsule Internet connection, try getting to your Modem Settings and opening a port as is normally done for a server (i think), only this time it's for the ATC. I'm no computer guy but this seemed to have worked. If anyone sees some kind of security concern here, let me know. Thanks and good luck.
    -J
    P.S. For my settings on the "free port," I used "HTTP-Server" and "TCP".

  • Mid 2011 mbp i7 with a SSD has problems, including grey screen/blue screen/beeping/freezing when I stream live video (i.e. watch espn or time warner cable) Help? Ideas?

    Recently my Macbook Pro (June 2011, i7, 8gb RAM, 512gb SSD, AMD Radeon 6750, Mountain Lion - since July - currently 10.8.2) has been presenting me with an array of problems, usually initiated when I am streaming live video. I was streaming Time Warner Cable on 12/9 and it gave me what looked like the blue screen of death.  It started up after about five attempts that time. The other day, after about a week of not using the computer, it wouldn't boot past the grey screen. I (option) started it and it gave me two boot choices, the regular HD and a "10.8 restore" option.  The HD gave me the grey screen and the restore option gave me the dark blue screen. I reset PRAM and that didn't work.  After a force (x) start it worked.  Today, I was using "Watch ESPN" and the screen froze and the computer did some kind of repeating RAM beep or something.  I rebooted and it started up fine.  I'm not watching any videos anymore, but this is a problem since the primary purpose for my mbp is video editing. I'm still under AppleCare but I find more solid answers in the forums or at least better questions for the AppleCare people.
    Anybody have similar experiences, or a solid idea of what the heck has happened to my machine?

    I'm not really sure what method that person was talking about. I just read he had a successful install so I posted it.
    But I'll hazard a guess
    1. copy your entire drive to a backup drive
    2. boot into that drive and test it out - make sure its a flawless backup, it works, and the hard drive has no problems
    3. eject that drive, disconnect it and reboot into the leopard install dvd
    4. erase your main hard drive using disc utilities on the leopard install dvd -- you've made a backup, made sure that backup was good, and disconnected it so it's currently safely disconnected from the leopard install you're about to do. Also, on the hard drive you're erasing and installing leopard on to, many people recommend "Zeroing" it as well as erasing it. That option is part of the erase function in disc utilities on the leopard install disc.
    5. do a clean install of leopard
    6. follow step 4 from that original post exactly as that person described to do.
    7. read the rest of what they said
    That's pretty much it. With the backup/erase/clean install/import/ you pretty much get everything you need exactly the way you want it with very few things missing -- and you've done this over a clean install. Plus that poster did mention that you can select what you want to import from your backup hard drive.
    It sounds like its a "clean install" method that gives you control via "import from machine" option in the installer. Control over what parts of your "old mac" you want to import into your "new leopard mac".
    Hopefully that helps. It sounds more involved, but its actually pretty quick and provides you with a perfectly save backup in case anything goes wrong with the leopard install.

  • Airport Extreme set up with Time Warner

    OK. I am experiencing a similar problem as mentioned in a differnt thread, but a bit different. First my Airport Utlility is 6.3.1 so the graphics for settings are completely different.  I have an ATV2, Black Mccbook and Ipad2. My problem is when I try to add a third device of the three, especially the Macbook, once I get it an assigned # via the modem (using a White, new Surfboard 6141 and Time Warner as provider), my Ipad gets dropped. Once I even lost the ATV2.  The Mccbook is generating its own DHCP address. When I have it on and reboot the modem, it sets it up , but then I lose the Ipad when I turn it back on. My apple extreme in set in Bridge,(by default it is a 2007 model.Has never been a problem when I used Verizon.Where do I go from here. Been playing with this all day.  Internet connect is set fort DHCP . Network is set for Bridge. I have no Ivp6 settings.
    iMac, Mac OS X (10.7.5), Pioneer 111-D in a Galaxy external box, PreSonus Firebox, Ipad2, ATV2
    Like (0) 
    Level 1 (0 points)
    Moncrief
    Re: My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?Mar 22, 2014 5:06 AM (in response to Moncrief) 
    AND, the Airport Utility  in my version looks nothing like what has been pictured previously in this post.  I don'y have a screen that allows for Share a oublic address, Distribute etc.iMac (21.5-inch Mid 2011), Mac OS X (10.7.5), Pioneer 111-D in a Galaxy external box, PreSonus Firebox,
    Like (0) 
    Level 1 (0 points)
    Moncrief
    Re: My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?Mar 22, 2014 5:11 AM (in response to Moncrief) 
    Also, I was not given instructions for set up from Time Warner. It was done via a phone call by the technician when they installed the cable. Timw Warner takes no responsibility for owned Routers and how to configure them. They just make sure the modem is probperly feeding the signal. Message was edited by: Moncrief

    (using a White, new Surfboard 6141 and Time Warner as provider)
    This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
    My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
    Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
    Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
    You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings  (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

  • Can I keep my AT&T & Yahoo email addresses after we go back to Time Warner?

    When we found that we could be paying $76.95 LESS per month for MORE, better service with TWC, we decided to swtich back to TWC. (This would never have happened if AT&T wouldn't have sent us a bill asking for $54 more starting this month without even warning us! But that's what they did and it prompted me to call TWC to find out what they could offer. And their best bundle is $76.95 cheaper than AT&T's best bundle, so we switched. It wasn't an easy decision to make because we've had AT&T phone service for 45 years and AT&T Internet for 17 years! We've only had uVerse for 2 years, but even though it's not as good as cable, not as convenient and doesn't have all the cool perks that TWC has, we were going to sign up for another 2 years. Until, like I said, we got the last bill. We don't appreciate being treated this way after paying for the service all this time, never being late, not once, in fact they just take the money out of our checking account each month so it's never late! But, after having all my email addresses with worldnet.att.net, att.net, sbcglobal.net and yahoo, for 17 years, I hate the idea of giving up my email addresses! EVERYONE I know, family & friends, and all the companies and websites I've signed up with know me as my name @ att.net.So, I wonder if I'll be able to access my email accounts after the switch? Or will AT&T just close those accounts? I sure hope there's someone out there that knows the answer to this question will see this and send an answer very soon because I've been fretting about this ever since we made the call to TWC. In fact this is the only reason why we didn't call to switch as soon as our contract was up. (BTW - all the better services we'll have with TWC will be a nice change especially since we don't have to sign a contract! We can drop any service or add any service at any time without paying a penalty!) 

    Tigereyze209 wrote:
    The short answer is, yes, you can keep your AT&T associated e-mail addresses. They have to be modified in some way, but how to do that is pretty easy to find on their support web page.
    Comcast it trying to  buy out Time Warner?   Oh   Myyyyyyyyyyy  (said in George Takai voice)
    The company with the defacto worst customer service in any industry, hooking up with a company that has so many unsuspecting inocent customers.     I really feel for them.
    Email addresses don't have to be modified after cancelling service, nothing on email support page about that topic.
    Chris
    Please NO SD stretch-o-vision or 480 SD HD Channels
    Need Help? PM ATT Uverse Care (all service problems)
    ATT Customer Care(all other problems)
    Your Results May Vary, In My Humble Opinion
    I Call It Like I See It, Simply a U-verse user, nothing more

  • Time Warner Issues

    First off, let me give you a rundown of the internet devices in my house.
    2 MacBooks
    1 PC
    1 Laptop PC
    2 iPod Touches
    and an xbox 360.
    I am using Time Warner as my internet provider and I have an Airport Extreme.
    Every 2-6 hours, I will be kicked off of the internet.
    I will still get a wireless signal, but cannot load any new pages.
    I go to my modem and turn it off, wait 5 seconds and then turn it back on. After that, it's good for another 2-6 hours.
    Anyone have a problem like this?
    Please please please help me out.
    I am getting tired of going and turning my modem off and then back on, when I know there has to be a better answer to this.
    Thanks in advance.

    Dude.  You are awesome! I am SOOOOOOOOOOOOOO glad you posted this solution.  The fact that you took the time to post even AFTER you figured out a solution shows how thoughtful you are as an individual.
    Its amazing to me that someone would comment adversely becuase they feel its in the wrong forum.  If it affected their life as it does mine then they would get it.  Amazing how people cant see past themselves.  Who cares what forum its in if its informative? Worse case just move it to a different forum.  We need more people like you and less like them in the world.
    Thanks Im gonna try the solution right now!

  • TS1702 Time Warner app problem

    Time Warner app no longer works.  Reinstall and other attempts do not fix.  All I get is the TW logo and after 15 seconds the channel lineup flashes by.  Any ideas?

    Contact the developer to let them know their app does not work.

  • Popup Display in Real Time Warning

    Hi,
    I am using SAP ME 5.2.4.7.
    I am configuring Real Time Warning. I configured the following settings.
    1) In the event maintenance, I used the event type as RTW_CONSEC_NC and event activity as CONSEC_NC_HOLD_REL. (I used all the default settings of CONSEC_NC_HOLD_REL).
    2) In the Pod Maintenance, for * POD, I set the Real Time Event Display as Popup.
    3) In Real Time Warning Maintenance, I added top level material, operation and resource where I want real time warning and in the Consecutive Identical NC panel, I added NC Count level as NC Code, Non Conformance as Failure code (F01), Event Type as RTW_CONSEC_NC and Count as 1.
    If I do Non Conformance for more than two times for an SFC, there is neither popup message nor the resource setup is changed into Hold Consec NC. But when I set the Real Time Event Display as Window, I am getting a display saying the operation is not available for use in the POD itself.
    Kindly let me know whether I need to do any other configurations to get a Popup display?
    Thanks,
    Joe

    Do you have indicators on your front panel that display a value from a software counter?
    How are you updating or refreshing the displays? If you have indicators in a while loop then the indicators will be updated with each iteration of the loop.
    Chris_Mitchell
    Product Development Engineer
    Certified LabVIEW Architect

  • Time services in Active Directory

    We have an old Ubuntu box running as an NTP server and as part updating our systems we are planning to decommission it.  However, this system has been set as the local machines NTP server via DHCP scope options and via group policy.  If I just
    switch it off then all the Windows clients or any DHCP client on the network will not know where to get the correct time from and could cause connectivity issues on the domain.
    I have tested a new GPO on an isolated machine to see what the effects are and not a lot changed, the client machine effected by this new GPO just reports DC01 as the NTPServer when I run w32tm /query /configuration and reports the source as being local
    CMOS clock when i run w32tm /query /status.  Is this normal?
    Running the same thing on my PDC shows the clock as being Free running system clock, should this be set to an online time service, or should it not matter (as long as the clients are only getting their time
    from the PDC?
    What I would like to know is is there a best practice guide somewhere I can read through?
    I have been trawling various searches but can't seem to find anything relevant.
    Drac

    We have an old Ubuntu box running as an NTP server and as part updating our systems we are planning to decommission
    it.  However, this system has been set as the local machines NTP server via DHCP scope options and via group policy.  If I just switch it off then all the Windows clients or any DHCP client on the network will not know where to get the correct time
    from and could cause connectivity issues on the domain.
    You can use GPOs to make your Windows Client computers use your AD forest topology for time sync. I have described that in this Wiki article:http://social.technet.microsoft.com/wiki/contents/articles/18573.time-synchronization-in-active-directory-forests.aspx
    Once you are sure that all Windows client computers (and non-Windows computers if you have some) are using your AD forest topology for time sync, you can remove your Ubunto box.
    I have tested a new GPO on an isolated machine to see what the effects are and not a lot changed, the client
    machine effected by this new GPO just reports DC01 as the NTPServer when I run w32tm /query /configuration and reports the source as being local CMOS clock when i run w32tm /query /status.  Is this normal?
    Is the client you use running as a VM? If yes, you can consider disabling the time sync feature with the hypervisor. 
    Otherwise, please consider running the following commands to re-create registry entries for time sync configuration:
    w32tm /unregister
    w32tm /register
    Currently the PDC does not sync with any online time server, just its own internal clock (this is a virtual Windows
    2012 server with the guest set not to sync time with host, if that makes any difference?).  So i need to set this to use an online time server and then "reset" the clients to use the PDC instead of the internal NTP server.  The other DC's in our
    domain all use the PDC as their time server along with all other infrastructure servers.
    You need to configure the PDC emulator of the root domain in your forest to sync its time with at least two reliable NTP external servers. 
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Network issue using Time Warner, Airport Extreme, MacBook Pro OSX, Windows7

    I have the following on my home network:
    - Time Warner cable-internet and phone service.
    - Apple Airport Extreme Base Station hooked up to the cable modem
    - MacbookPro running OS 10.6.3 connected wirelessly to airport extrm
    - HP Laptop running Windows 7 connected wirelessly to airport extrm
    - HP Officejet Pro 8500 connected to wirelessly to the airport extrm
    - iPhone connected wirelessly to the airport extrm
    - XBox connected via ethernet cable to airport extrm
    - USB external hard drive connect via USB cable to airport extrm
    My network worked fine with only my Macbook Pro, Airport Extreme, iPhone, XBox, and occasionally my buddy's Macbook Pro all on the network at the same time.
    I recently added an HP Laptop running Windows 7 and a wireless HP Printer to the network at the same time.
    Now if both the Windows 7 PC and the Macbook Pro are on the network at the same time, one of the machines will get booted from the internet. At one point, I got a message on my MacBook Pro that said another computer on the network is using the same IP address. I also have trouble communicating with the new HP printer if both the Windows 7 and the Macbook Pro machines are on the network at the same time.
    How should I set up my airport extreme to allow all machines to function properly on my network. Right now, the network is set up to receive IP addresses automatically through the DHCP server. I read somewhere that maybe setting up the computers to manual static IP addresses and manually entering in the DNS server info into the airport extreme may fix my problem. I also read that configuring the network to all share a single IP address will fix the issue. How do I set this up. I would also like to keep my network invisible from being seen. Is this still possible?
    Thanks for your help on this!!

    To change the IP address on a Mac, go to settings, then select the network interface you use, then, change Automatic to manual. I don't know how to do this on windows 7, and you can access and change your printers settings by clicking in the bookmark windows on Safari, clicking printers, and open up it's settings.

  • Im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    You must download and install the CS2 version provided by Adobe and you must use the new serial number provided by Adobe.
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

  • Verizon Internet OUT, Time Warner IN...now what ?

    Verizon has not provided me consistent reliable service in the past 3 months. So I am making the jump to Time Warner Cable Road Runner Internet service.
    Simply, what changes do I need to do with the Mac OS X Server settings on my end to make the transition smooth ? (pointer records changed, MX records, Forwarders updated, named.conf updated) ?
    Just wondering so I don't fall into a surprise.
    THANKS !

    hello, when you are using speedtest.net or a similar flash-based site to measure your connection speed, it might be an issue with the protected mode that [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html adobe has introduced] for its flash plugin for firefox. some old versions of f-secure or trusteer rapport are known to cause such slowdowns together with flash, or it might be something similar on your system that is interfering (maybe security software that is blocking/sandboxing the container used for the protected mode, etc...).
    as a workaround you could try [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] & see if this makes a difference.

Maybe you are looking for