My Scenario R/3- XI- File systeem

Hi
I would be working on Scenario R/3->XI->File system. I thought of using ABAP proxy at R/3 end but later I realised that I cann't use ABAP proxy as my R/3 system is of 45b version.
Can anyone tell me what adapter I should be using for this scenario shall I use RFC adapter or something else.
Regards
Ria

Dear Ria ,
For R/3-XI-FILE scenario ,
Do the following :
1) Do ALE layer configuration between R/3 and XI
2) If u are using customized IDOC the the after creating CUSTOMIZED idoc , PLZ CREATE TRIGGER PROGRAM ALSO and if u are using standard idoc then trigger it using standard trigger program .
3) Use only file adapter in this case
4) Do your required configuration in SLD , related to software component, Technical system , business sytem etc both for sender as well as receiver .
5) Do the configuration in IR and before that u must import your software component from SLD .
6) Configure your ID for File adapter , receiver agreement , receiver determination , Interface determination . Note : plz don't configure sender agreement in this case .
Hope it will help you .
Cheers
Prabhat

Similar Messages

File to Idoc Scenario and Idoc to File Scenario's

Hi Friends ,
This is Shalini Shah,
Please give me the details of how many busines sytems required in File to Idoc Scenario and Idoc to File sceanrio's.
In business system , what is the name of Integration server(this name is related to XI ot Third Party)
Please give me the full details of these two scenarios from Scratch.
Thanks in Advance.
Regards,
Shalini Shah.

Hi
These r few links which gives u complete scenarios...
for idoc to file:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
for file to idoc:
part1
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
part2
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
part 3
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
This link is also good:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Troubleshooting File-to-IDOC Scenario in XI.
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
kindly rewards points if helpful.

My scenario is mail to file

Hiiii,
my scenario is mail to file and Transport protocol is POP3.
complted Whole Process..
But when i m Sending a mail from SBWP... the mail was sent Successfully sent to the receptint...
But i m not able to see my message in SXMB_MONI ... and when i check in RWB i got theerror at Sender Communication Channel..
3/5/11 12:38:08 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
3/5/11 12:26:08 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
3/5/11 12:14:08 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
3/5/11 12:14:07 PM   mail client job scheduled
3/5/11 12:14:07 PM   mail client job stopped completly
3/5/11 12:14:00 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
how to solve this issue ? please give the suggestion ........

Hi..
the error showing occurs if the ports are not correctly opened with the mail server.
check with your basis or IS team for opening the ports/access to the mail server.
Once the connection is established after opening the ports, activate the channel once again and it should work!
Cheers,
Souvik

How to configure a scenario which posts same file to different directories

How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.

Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy

I want to use PCK standalone and do one scenario of mail to file ?

hi all
Is it possible to use PCK standalone and do scenario of mail to file by using PCK mail and file adapters .if yes reply me
thanks

i didn't get you sir ...can please clarify me . i had done the same scenario using XI but in PCK is it the same? because in PCK it requires Default Interface Name and Namespace which must exists in XI and we can't even create our own interface in PCK .so howz it possible without XI.
please reply me
Message was edited by:
Ashwin Kumar Dhakne

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

BPM- scenario RFC - XI - receive file - - SOAP - return answer to RFC

Hello everybody,
I have the scenario
RFC call a BPM
In the BPM, I have to receive information from a file ( generated by another system 4 times in a day)
Mix the data of the file with the data of RFC
Send them a SOAP
send the reply to the RFC
My problem is : how to receive the file on demand because in file adapter ( sender ), the definition is only by interval of time?
Is there anybody who can help me?
Thanks in advance and best regards.
Eric.

Hi Eric,
in sender file adapter, we just have polling interval - so in your receive step in BPM you have to wait for the source file.....
i do not think any other workaround will be feasible for your this case
Regards,
Rajeev Gupta

BPM scenario to send same file data two RFC function modules

Hi,
Scenario:same file need to send the data to two different RFC functions.
so in this case i need to use two receive steps or only one receive step? beause file should be places in the archive after second rfc triggered.
but this scenario client need to go with BPM only .I am new to BPM.please suggest the steps and process need to follow for this scenario.

Hi,
You will have one async receive step to start the BPM from your file interface, 2 synchronous send steps for each RFC, and an async receive step to archive.
Don't use the transformation steps in BPM, as it decreases performance. You can use the same abstract interface for your file format in the send steps, but specify different Send Contexts for the receive steps. In Configuration, use a condition on Context object ProcessStep = Send Context from your BPM, and route to the correct RFC interface, using a mapping from your file to the RFC.
Hope this helps !
kr,
Peter Glas

Bypass scenario with a specific file naming schema

Hi,
I am working on a bypass scenario where I pick a file from FTP location with naming conventions SCOS2UVMS_.TXT and place the file at other location with the name USED_Car.TXT.
Now I have to place this file with the Date and Time Stamp as DYYMMDD.THHMMSS.
How can I achieve this?
Thanks & Regards,
Sachi

Hi,
U can bypass the Integration repository steps and pass a file from 1 locatio to other.
U need to configure only the Integration Directory. In all the objects (sender agreement,Receiver determination,Interface determination,Receiver agreement) just give the interface name as dummy and name space also dummy.
Means u just give a arbitary interface name and namespace,which doesn't exist.
Then run the sender communication channel and check in target directory.
This will work fine....
But i think its nt a good idea to use SAP PI, for the just sake of transferring the files from 1 location to other.
U can schedule a batch file,and move the files b/w two locations.
I hope this will solve ur problem..
Babu

IDOC to file scenario plus control (master) file

Hi PI gurus,
I have got the simplest possible scenario.
It is IDOC to file without BPM. Works fine.
Is there a smart way to add master file ( the one that would contain number of records and filename with data sent ) without BPM ?
THe requirement is first to ftp data file and then master file as the second file ( The reason is master file triggers processing of data file ).
Cheers
A.

should be simple.
use two interfaces, one for data file and one for master file.
two mapping which will create the required files and then in interface determination add the interfaces in the required order and check the option maintain order during runtime.
this should solve your problem.

Anyone have a scenario to do a file to file with xi and bw

Hi,
I am looking for a scenario that has file to file between an xi and a bw system...

Hi Ravi,
Check these files, hope it will be helpful for you:
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
Regards,
Subhasha Ranjan

Scenario-- One Idoc-- Two files has to generate.

Hi All,
I got the scenario where i need to generate two files ( 1 with header data and 1 with item data) for single idoc FIDCC1.
Is it possible to acheive this?
Please suggest me how to appraoch this scenario?
Thanks.
Regards
Seema.

Thanks Rajesh,Ramesh and Preteek.
Im following the below steps.
File type : 2 DATA TYPES (Header, Item)
Msg Type: 2 Message Type (Header Msg, Item Msg)
Msg Interface: 2 Messgae interfaces (Category Inbound, Mode assynchronous).
Message Mapping:
You can do a multi mapping (1:N).
Else
Perform 2 message mapping
a) with IDOC TO Header Msg
b) Between IDOC to Item Msg.
Perform 2 Interface Mapping
IDOC-> HEADER INTERFACE
'IDOC -> ITEM INTERFACE.
ID:
Import Both the Business Systems
1) Define 2 Communication channel for File Business Systems. (one for Header, other one for Item).
2) Define 1 Receiver Determination
3) Define 2 Interface Determination
4) Define 2 receiver Agreements as we have 2 communication channel.
Hope it will works..
<b>
Rewarded the points.</b>
If i get get any doubts while developing .. i will disturb u guys again.
Thank You.
-Seema.

File to RFC scenario want to read file name

Hi All,
I am having file to RFC scenario in which i am having file name in format text_yyyymmdd.txt.
i want to read this file name and by separating the date in file name i have to pass this to one of the RFC date parameter.
please help me to sort out this.
Thanks
Swapnil

Hi,
By writing simple UDF in your mapping you can Acheive this
Try this Once
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String MyFileName = dynamicconfiguration.get(key);
String str[] = MyFileName.split("_");
return str1[1];
Map this to the date parameter(RFC) in the mapping .
Thank & Regards,
Deepthi
Edited by: Deepthi Muppasani on Sep 23, 2011 8:17 AM

HT201250 I have 2 Lacie external drives connected to a Windows PC. What is the best scenario for backing up files on both computers? I would like to save all my files on one backup drive and have Time Machine backup that external drive to the other.

I don't know if this is a good idea, because the external drive is going to be slower than using my local hard drive to open files from. My IMac has 1tb and the 2 external drives have 1tb each. The IMac is my computer and my Wife uses the Windows PC, so I have to make sure both of our files are backed up. Thanks in advance for any advice regarding this issue.

I'm in a similar situation including movies I've purchased from iTunes...
Here's my setup:
I have all my iTunes data (music, movies, etc.) as well as about 10 GB of photos stored on a nework storage device that uses RAID-5 with SATA disks. This is basically a little toaster-sized NAS machine with four hard drives in it (www.infrant.com). If one of these drives dies, I get alerted and can insert a new one without missing a beat since the data is stored redundantly across all drives. I can also just yank out any one of the four drives while the thing is running and my data is still safe (I tried this after I bought it as a test).
That's how I prevent problems with a single disk... Redundancy
Now onto "backups"...
Nightly, my little RAID toaster automatically backs itself up to an attached 250GB USB drive. However, these backups are only of my critical data... documents, photos and home movies... I don't bother backing up my "Hollywood" movies since I can live without them in a disaster.
... I actually don't permanently store anything I care about on a laptop or a desktop. It all goes on the NAS box (Network Sttached Storage) and then my other computers use it as a network drive. It's attached via Gigbait to my main computer and via wireless to most everything else.
My achilles heel is that I don't store anything outside of my house yet. If I was smart, I'd alternate two USB drives attached to my NAS box and always keep one of them somewhere else (Safe Deposit Box?).
...and that's just one way to do it.
-Brian

How to get structure of IDOC into xi in the scenario is IDOC - XI - File

hi XI Guys,
When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI, As we will define Data types in File -> XI -> File. Please send Step by Step process as i am new to Netweaver(XI)
ThankYou,
B.Pushparaju.

When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI
>>>>
import the IDoc under the imported object in your SCV. Note that import should be allowed for the SCV.
As we will define Data types in File -> XI -> File.
>>>>
Ref. these blogs to help you out ..
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

My Scenario R/3- XI- File systeem

Similar Messages

Maybe you are looking for