My signature goes all funky when I hit reply. What could be the case?

My signature goes all funky when I hit reply. What could be the case? Thank you

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

  • I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

    i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT2589 I'm trying to buy movies in English, and just now an app (pages) but during the moment to pay with my credit card I can't.All required information it is correct. what could be the problem?My credit card is from El Salvador And I can't buy english m

    I have registered my credit car which is from el salvador, but when I try to  buy English movies for example I can't what can be the problem? how Can I solve it? also I'm trying to buy PAGES app but I cannot do it Somebody can help me?

    Hi...
    My credit card is from El Salvador And I can't buy english movies?
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • My iphone 4 is not wanting to light up at all ,making noise when getting calls etc. what could be the problem?

    I was trying to figure out why there was a cricle with a lock image in it on the top of my phone , so i was going through settings and couldnt find anything that was out of ordinary .so then i was trying to make room for a software update.The only thing i changed was was putting the little on screen help button. Then phone frozen after i was going through settings again to figure out the cricle and lock image on my home page. Then after a cetain amount of time, When screen time went out it wouldnt let me turn back on screen. But it will make noises from calls and texts and ect still when they come in. But it will not light up when calls or texts come through or notifications. It wont light up when i try to unlock it and or change the volume settings. My screen is blank and black but is still making sounds as if it was still on and working with no picture. Front camera still takes pictures when you hold down top and middle buttons but still not image on screen. Is there any suggestions that i can do myself or do you think i need to take it in myself to have it fixed?
    Thank you so much,
    Grace Wilson
    <Email Edited by Host> .

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Nothing happens when I click. What could be the reason?

    Using a web-based application with firefox where I can normally access my e-mails and database entries, nothing happens when I click, although the mouse cursor shows the "hand with finger" sight when I run over it. This was working fine till yesterday morning.
    It can't be a problem with the web-based application, as colleagues using the same firefox version are not facing any problems. Also, when using a different browser (e.g. Chrome) no problems either.

    Using a web-based application with firefox where I can normally access my e-mails and database entries, nothing happens when I click, although the mouse cursor shows the "hand with finger" sight when I run over it. This was working fine till yesterday morning.
    It can't be a problem with the web-based application, as colleagues using the same firefox version are not facing any problems. Also, when using a different browser (e.g. Chrome) no problems either.

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

    When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
    == This happened ==
    Every time Firefox opened
    == a couple of months ago

    Hello Brian.
    You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
    http://support.mozilla.com/en-US/kb/Firefox+hangs
    What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail.  It looks like it's working ok; but when I hit Send nothing happens and the program stops responding.  Any suggestions?

    I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail.  It looks like it's working ok; but when I hit Send nothing happens and the program stops responding.  Any suggestions?

    I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
    elements or to send photos as attachment to your e-mail.  I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated.

  • I need to get into the Bios of my p6112p, when I hit F10 it says entering the configurat​ion &doesnt?

    I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks
    rebelthepit

    rebelthepit wrote: I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks rebelthepit
    Hello reblthepit, HP systems are a bit picky about what memory will work in a HP system.
    You might want to go to Crucial.com and run their memory configurator and let Crucial advise the memory that is certified compatible with your system. This takes the guessing out of trying to purchase memory that is supported for your system.
    Just because the motherboard will boot the start of the bIOS does not neccessarily tell you a lot. If you had some memory issues, and no memory was recognized by the BIOS, you would be getting some beep error codes.
    If the motherboard was not a genuine HP Provided motherboard, it will not work with the HP provided operating system. You would need to purchase a new operating system.
    You also could not just replace the motherboard and try to start the system without a new installation of the operating system. There would just be too many driver conflicts.
    Just some thoughts.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

    I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

    Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
    I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem.

  • My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

    My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

    We can't know if there's a "fixture" because we can't examine your phone.  But Apple can.  Make a Genius Bar appointment and get your phone evaluated.

  • Email received by Windows Outlook crashes outlook when they hit reply

    I'm getting frustrated responses from the recipients of emails I send them from mac. mail. They say that when they hit reply their Outlook application crashes. If they copy and past the contents of my mail message into a new email and send that to me it works just fine. Is anybody else having issue or have a solution?

    Thanks Bob,
    Calibri is the default font, and is on Windows 7, not as default on XP, so i will invistigate that further. Thanks for that sometimes you miss the obvious!
    Microsoft update - they claim its an issue they are aware of. Their workaround - clean uninstall / reinstall Office and have users use Word to compose emails.. nice! An email client that you cannot compose emails in.
    Any more suggestions hugely appreciated.

  • Ipad will work when you hit home and then slide the unlock bar - then when you get to the homepage, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    Ipad will come on when you hit home and then slide the unlock bar works fine - then when you get to the home page where the icons are, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    The home button is the main button off the screen - where is the sleep button?  When I hit home I only see the lock slider (its black) and a button that has a flower on it that pulls up photos we took that are on the ipad.  Thanks for your help!

  • When I hit reply on the .Mac Mail site, an incorrect address is generatedW

    When I'm using the mail program on the Internet .mac site, and hit reply to respond to a letter I received, inevitably the automatic address generated by the program won't function. The reply button puts the person's name and then e-mail address in brackets on the address line. When I hit the command to send, I receive a message that the address is not a valid e-mail address. Then I have to go back and erase the name and remove the brackets-then I am able to send the e-mail. Is everyone having this problem with mail on the .Mac site? I mean I am not typing in the e-mail address incorrectly. The program generates the return e-mail address when I hit reply and it is always incorrect because it puts the person's name as part of the e-mail. Am I doing something wrong?
    Thanks
    Jim Lindsey

    Hi,
    This happens to me when the person's name you are
    replying to contains a comma and webmail tries to
    send it to two people.
    eg if a mail comes from SURNAME, FORENAME
    <[email protected]> then I will get an
    error as the program thinks that SURNAME is an
    invalid address
    but I get an error message every time. It brings up the person's name followed by the email address in brackets. Then when I try to send, I get the message that this is not a valid address. Is this happening with everyone on .Mac site? Surely not or they would fix it.

  • HT2729 When I hit camera then try 'Video' the program won't start just photos. What's wrong?

    When I hit camera then try 'Video' the program won't start just photos. What's wrong?

    Sounds to me like you are trying to tap on the word VIDEO.
    To change to video you don't tap on the word VIDEO. Instead, you drag the centre of the screen down. That will change the option from PHOTO to VIDEO.
    Of course, to go back to PHOTO or to SQUARE you drag the centre of the screen up.

Maybe you are looking for

  • Authorization Error while creating PO and A/R Credit Memo

    Hi Experts, We use SAP B1 2007A, PL:08. Some of the users are getting this error message while adding the PO, A/R credit Memo etc. As a superuser, I am able to perform this action. The Error Message is "[A/R Credit Memo-Rows-Discount % per row] [line

  • Need help to connect from MacBook Air to a Dell 1610HD projector.

    I need to mirror the display on my MacBook Air to a projector, I've gone to the System Preferences and it detects my Apple TV but not the Projector need help.

  • EPM 11.1.2.1 cannot connect to workspace

    Hi Everybody, Just installed EPM 11.1.2 on a Windows7 64bit box. Installation and configuration went ok (configuration done with OHS), WebLogic admin console shows all components up and running but I cannot connect to Workspace. If i access workspace

  • Macbook to Insignia

    I am trying to connect my macbook to Insignia HDTV. I have perfect video, but no audio. I have purchased the mini to rca cables that I have been told I needed. I have tried plugging them in everywhere possible, but with no success. Can anyone tell me

  • Photoshop Elements not working with Yosemite

    After upgrading OS to Yosemite I could not get Photoshop Elements 11 to work properly - sluggish operation and brushes not working.  I upgraded to Elements 13 but it gets sluggish as time passes and some of the filters don't work.  It is frustrating