My Story. (reply with yours, good or bad)

Im a perfectionist and ive admired Apple products since the dawn of the MacBook. I was unable to afford anything Apple untill the first iPhone was released. 3 months after owning it I knew I wouldn't want any other phone again.
In my opinion, the iPhone 4 is 99% perfect, but its that one percent that iritates me. I don't get dropped calls, but i do notice the signal problem every now and then. It doesn't affect the way I use it, but knowing it may cause problems if I hold it differently (for example, in bed, lying on my side) is allways at the back of my mind, this is that one percent.
Im getting a case soon and that should solve the issue, though im not getting it for that reason. The amount of grief I get from friends about the "Death Grip" (Just because they heard about it on the News), sometimes makes me think about other phones, but not for more than a second. The clarity of the screen, the fluidity and consistency of the software and the amazing HD video, these features combined in such high build quality and a stylish design, no other phone out there comes close. I love my iPhone because of its features, but I couldn't switch to another phone with better features because of the software. Its something that I don't often think about, but benefit from everyday.
Happy days, Andy

Shane's Stock Answer #20: Using iMovie to Capture for use in FCP.
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it. You can use either QT Pro or Compressor to convert the .dv footage into DV/NTSC in order for FCP to work with it without needing to render.
Shane

Similar Messages

Multifunction Printers - Please reply with your opinons

My wife and I are looking to buy a Brother MFC-820CW.
Does anyone have one of these? If so, what's your opinion of it? Can it in fact print to fax, and receive a fax straight to a computer with out printing it and then scanning it? Also, can the scanner be used with Photoshop (Twain acquire)?
If anyone has one, we would really appreciate your feedback.
On another note, does anyone have a multifunction printer, fax, scanner that is network capable and all the functions work on a Mac?
Thank you!!!!

On another note, does anyone have a multifunction
printer, fax, scanner that is network capable and all
the functions work on a Mac?
Richard,
I have a Brother MFC-7820N that prints black and white laser as I did not need color inkjet printing. It does scan color and has a Twain plug-in for PhotoShop that works. It has direct PC fax send/receive capabilities, but I have not used that as my clients and I tend to e-mail PDF documents. The MFC is connected via ethernet to my wireless router. I found that Brother keeps up with Mac OS updates. I am very happy with this unit.
The unit you are considering has all the features you are inquiring about. My only suggestion is to find out how efficient it uses ink, i.e., are there separate cartidges for each of the four colors, or one cartidge for cyan, magenta and yellow with a separate one for black.
Hope this helps. Good luck!
PB Ti 667 (10.3.9), PB G3 Firewire (OS 9.1), PB 12" Mac OS X (10.4.2) Wi-Fi, iPod 3G 15GB

Using iTunes with Sonos, good or bad ?

Hi,
I have just purchased a Sonos speaker system and have install the Sonos app to use with my iMac. I was just wanting to know if its a good idea to share my iTunes music library with the Sonos App? Is the processes fairly simple or could it cause any problem with my iMac?
Thanks,
Mark.

When you set up your music library in the Sonos controller app, you simply point to the folder where your iTunes library is stored. The first choice you are given when clicking "set up my music library" (my version of the app is in Norwegian, so I'm just assuming that that is what it says) is to direct Sonos right to the Music-folder on your Mac, so unless you've stored your iTunes music somewhere else, this works fine. Sonos does the rest itself. Note that the computer whose Music-folder you point to must be running when you want to listen to music with the Sonos system.

Capture with iMovie – good or bad?

Hi there
I have heard various opinions, but I am not sure what to make of whether having iMovie as part of your workflow is a good idea or not.
On trips we sometimes use 2 camcorders, and on returning it is very useful to import the footage using iMovie 8 for cataloging. One reason for this is the fact that it names the file according to the capture timestamp, making it possible to order all the clips according to capture time. The cameras are HDV, and iMovie converts the clips to the Intermediate Codec.
My question is, for the enthusiastic amateur, does this workflow have negative impact on the quality of the footage, and if so is this effect enough to consider a change in workflow? The projects are done in FCP eventually and output on SD DVD.
Any help appreciated
-hannes

Shane's Stock Answer #20: Using iMovie to Capture for use in FCP.
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it. You can use either QT Pro or Compressor to convert the .dv footage into DV/NTSC in order for FCP to work with it without needing to render.
Shane

Please reply with some good news... :(

Please can someone help me....
For the past few days my iphone5 has been nothing but a nightmare..
Its 3months old I got as a replacement phone from Apple.
It started off by going through the battery quicker than usual.....
Then when I tried to charge it, it would charge to 5% then stop charging, I had to unplug the
charger and reconnect in hopes I will get a full charge.
Then all of a sudden it doesnt wanna charge, I used 3 different chargers that is of my sister #5
My phone is now Offically dead and wont show the charging icon to show its charging...
Ive done a hard reset with the home and off button and also with it charging and also gave the mute button a play...
Im not sure what to do if anyone has any advise please do so and help me out here guys...
CHEERS

Apple products usually have a one year warranty, I would take it to Apple Store.

HT2105 When you get a apple receipt for itunes songs and you paid with a itunes gift card do they charge you or give you store credit what's store credit is it good or bad or does it charge you if you have a free account with no credit cards at all is it

When you get a apple receipt for itunes songs and you paid with a itunes gift card do they charge you or give you store credit what's store credit is it good or bad or does it charge you if you have a free account with no credit cards at all is it bad?

iTunes credits are, for example, if you download a song from the store and it's found to be corrupt - if the track can't be fixed then iTunes support will tend to give you a song credit for a free download.
When you purchase music from the store then any credits that you have will be used first, then any balance that you have (e.g. from iTunes gift cards or allowances), and any remaining amount will be taken from your credit card.

Goods and Bads with the 6110 Navigator

Hi
New user of this forum and a proud owner of a Nokia 6110 Navigator. I had the 6280 but after 2 SW upgrades and still problem with it, I gave up.
First impression of the 6110 is good, but I found a couple of small things that ”irritates” me.
1 – The timer function when you write “0200” and press options instead of green (call) button.
2 – The original headset is too cheap to be an expensive phone like this, should be more like Koss “plug-in-your-ear” kind of headphones, instead of the small “put-close-to-your-ear” thing that is included.
Also, the straight up cable from the top of the phone is no good. Makes the phone lie bad in the pocket. I also guessing that this cable is going to snap after a while. Why not a 90 degree “adapter” or something?
3 – When you sending an SMS, on my 6280 you could choose “last used number” or something like that, now you have to choose name, and then number, and then OK to go back to the SMS.
Well.. that’s it so far. Anyone else have goods and bads about this phone ?
mvh / regards
Timmy

hi im havin same issues!!
i went from 6280 to 6110 after i smashed it
1.first off i didnt kno of the timer option...good bcoz it was annoyin not havin a stopwatch
2. that "recent use list"...lack of it...is annoying. i just made groups of ppl i msg most
3. menu organisation is confusing
4. in call history, it only shows most recent time for that entry, ven if they rang 5 times that day, also they dont show call long eg duration of 3mins 40secs
5. on my 6280, i had a shortcut menu as mi left select button, cant do this now
6. power button is end call button, lotsa accidental turn offs
7. cant turn off start up tone
oh well i still like it

Why cant i re-add gmail button on google toolbar? 4.01 is not good, I have never had a problem with your products..Whats going on??

Question
Why cant i re-add gmail button on google toolbar? 4.01 is not good, I have never had a problem with your products..Whats going on??

http://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks

Laserjet 200 firmware update - "Something is bad with your device"

When trying to update the firmware on my HP LaserJet 200 color M251nw I get:
"Something is bad with your device. Device is in error state and cannot be reflashed because of this. Resolve the problem and try again.".
However the device looks ok, no errors on screen, logs, checked Web UI for hints, reboothing doesn't change the issue....
Current firmware is 20121026.
Thanks for your help!

Hi,
I just check the system requirement on the firmware update page, it doesnt mention MAC.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-7&cc=us&dlc=en&lc=en...
Can you try updating it by conecting it to a windows PC if you have any?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

HT4972 I tried to update my iPhone 3S with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea.

Some good info to help with your iphone adventure

Helpful tips for the average user in trouble shooting issues along with some screen/body protection...If you having problems with your iphone
try this first
1. Soft reset--hold down the home key for several seconds allowing apps to reset
If problems cont see #2
2. Hold the sleep/wake button and power off the phone for a brief moment.
If problems still see #3
3. Hard reset--Hold down the sleep/wake button and home button for several seconds should see apple logo and system will keep info
If problems cont to occur see 4
4. Perform total restore from Itunes (YOU WILL LOSE ALL PICTURES ON CAMERA ROLL) Must replace all songs and videos taking 15-20 min
If this does not work the notify apple
Another thing to protect your iphone is to consider a case, screen protector.
Powerusa has a screen protector that covers the whole screen and feels like the glass. Cost 16 and protects screen from scratching..
http://www.powersupportusa.com/products/iphone_filmset.php
I also recommend the Case by Case mate and the Holster...Protect the body and screen very well.
http://www.case-mate.com/s.nl;jsessionid=ac112b1d1f43b42dae00c6f14453818c9755a08 29962.e3iKaNePch4Re34Pa38Ta38Mb310?it=A&id=254

I think it would help alot of people with their issues first! If problems cont to happen then seek the appropriate help.
As for protection everyone should protect their investment

The Macbook Pro: Good? Bad? Ok? You Decide.

Hi everyone. I'm definitely thinking about getting a Macbook Pro, but before I dedicate myself to getting one, I want to hear from you. What have been your experiences with your own, or a friends Macbook Pro? I heard that there were a few heat problems, but then I also heard that the problems were solved; what's the story on that? All together, tell me if you think I should get a Macbook Pro? Is it worth it, or do you not think so? The one I'm looking at is $2,099(1GB RAM, 80GB HDD, 15.4in.), does anyone have that specific model? If so please reply. I've been on Windows for a while, but I'm almost defintely going to get a Macbook Pro, however, now I'm looking to you to decide. Your the deciding factor for me, so tell me what you think.
Thanks SO MUCH!
Macbook Pro "MBP" Mac OS X (10.0.x)

Hi everyone. I'm definitely thinking about getting a
Macbook Pro, but before I dedicate myself to getting
one, I want to hear from you.
Good to see you want to be an informed buyer.
What have been your
experiences with your own, or a friends Macbook Pro?
I love my mac book pro.
I heard that there were a few heat problems, but then
I also heard that the problems were solved; what's
the story on that?
The story is that some people are melodramatic regarding the heat issue claiming "3rd degree burns" on every part of their body where realistically only an exploding Sony battery will cause that.
For the more serious MBP users, some have experienced heat rash, minor 1st and 2nd degree burns due to excessive use while hot. This is generally caused by direct contact with skin - and generally does not occur when there is some sort of barrier between the person and the computer - such as pants.
Many peoples' mac book pros just get hot when doing major processes like rendering video and audio, and sometimes watching DVDs. These are processes that are appropriate sources of heat. Other users have had excessive heat with regular use like using Safari and Word Processing. That would be excessive heat.
While many complained about the heat, I saw more complaints then I did people saying "I tried to explain to Apple how hot the device is and they didn't care". I think it was a lack of communication to apple of the problem.
Regardless, some people took it upon themselves to open up their computers to check out the heating source, and some found "inappropriate" thermal paste application. Now I put inappropriate in quotes because unless they are an apple technician, they have no right to say what appropriate thermal paste is on this computer with a new processor. Many had re-applied the thermal paste with success and some without. Bottom line is that their assumption was arbitrary, and they should have took their computers to an appropriate technician for evaluation.
Bottom line - case is aluminum --> it is designed to dissipate the heat --> it will get hot at times --> if it gets too hot with simple applications you should bring it in.
All together, tell me if you think
I should get a Macbook Pro? Is it worth it, or do you
not think so? The one I'm looking at is $2,099(1GB
RAM, 80GB HDD, 15.4in.), does anyone have that
specific model?
You did not make mention of the processor speed, but I assume it is 2.0GHZ. Mine is similar in that I have a 100GB HD. I think you will be happy with the speed of the machine and all that apple has to offer. I have had minimal problems, and the few that I did have were handled quickly and appropriately by apple technicians in store and at Apple Depot all within 3 business days.
If so please reply. I've been on
Windows for a while, but I'm almost defintely going
to get a Macbook Pro, however, now I'm looking to you
to decide. Your the deciding factor for me, so
tell me what you think.
No you should decide. It's your money, and your right to play with the machine first to see if it's what you want. First you need to decide if you want this OS, then decide if the MBP is right for you. You can have a very similar machine with the MacBook for a bit cheaper, if you don't need every bell and whistle.
Good luck with your purchase, your best bet is to go to a store, grab an employee and go over the computer top to bottom to make sure you're making the best investment for you. Of course we're all going to say to buy one!!!

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

Placing a PDF file in an InDesign Doc and PDF again for a vendor- Good or Bad?

Current debate in the graphics department is
Is it good or bad to place a PDF (general Press Quality) into an InDesign document and then creating a new PDF file with print vendor settings from that document?
My thought is that you in some cases are double compressing, lower dpi images getting compressed, RGB color mode images okay on layout but now are converted to CMYK and shift in the PDF.
Are there other issues and if so what are they.
Also is there an easy way to check ppi, color mode and compression of an acrobat PDF? I mean other than doing a preflight and searching into each image folder twenty levels deep. FlightCheck and Enfocus are not options,
too many vendors and not enough time.
Thank you all in advance for your words of wisdom.

Dov, I just got off the phone with a trusted professional in the Prepress field at a quite reputable print house, and he said "Dov is the guru of PDFs, ask him this...Will the InDesign CS3 preflight see the characteristics of a PDF (color mode, dpi(ppi), compression) if the original placed PDF is created as a pdf .X4 (1.7)? Ask him also if you were to use one form of compression (say lossless) in the original PDF, and then another form(say lossy) in the vendor PDF would it hold both or convert the first PDF compression to the second form?"
Any other responses are also welcomed.

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

My Story. (reply with yours, good or bad)

Similar Messages

Maybe you are looking for