My version does not update to 6, I tried uninstall and install it but it does not let me anymore

I uninstall it, but when I'll try to install it again, this is what I get:
Error: Paquete: gjs-0.7.14-3.fc15.i686 (@koji-override-0/$releasever)
Necesita: gecko-libs(x86-32) = 2.0.1
Eliminando: xulrunner-2.0.1-1.fc15.i686 (@koji-override-0/$releasever)
gecko-libs(x86-32) = 2.0.1-1
Actualizado por: xulrunner-6.0-2.fc15.i686 (updates)
gecko-libs(x86-32) = 6.0-1
Eliminando: xulrunner-5.0-2.fc15.i686 (installed)
gecko-libs(x86-32) = 5.0-1
Actualizado por: xulrunner-6.0-2.fc15.i686 (updates)
gecko-libs(x86-32) = 6.0-1
Podría intentar utilizar el comando --skip-broken para sortear el problema
** Se ha encontrado 104 problema(s) pre existentes en la base de datos RPM, este es el resultado de 'yum check':

Have you tried Restoring from backup or Restore to new? If that doesn't work contact Apple Genius Bar. Good luck, Cheers.

Similar Messages

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I appear to have lost all my audiobooks from itunes and cannot download a new purchase to my ipod.  I have tried uninstalling and reinstalling itunes but this has not helped - I am desperate as I depend on my ipod for listening to books

    My ipod touch has lost touch with my itunes account.  I appear to have lost all my audiobooks from itunes and a nook I downloaded from audible.com last week is on my itunes but I cannot syn it to my ipod.  I have tried uninstalling and reinstalling itunes but this did not work and I now have a different screen with itunes which I am not familiar with.  I need my ipod for audiobooks and podcasts because I have a visual impairment.

    iTunes 11 does some thinks differently. See:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    or
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    Also
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • Cannot start Fiefox after last update, on windows XP, tried uninstall and install- still nothing.

    OPerating system Windows XP
    Anti-virus- McAfee
    Updated to Firefox 7.0.1 -- have not been able to start/launch since. Tried uninstall and new install and still nothing. Tried to reboot-- nothing-- I double click and the hour glsss appears for a second or 2 and nothing happens.

    Thanks JRSPNW I will have to give that a try. At the moment I just have not tried doing anything else it, but a system restore will probably be the route I will need to take eventually, or I will just carry on with out iTunes on my computer. The program has become such a pain the a$$. This version is the most user unfriendly it has ever been.

  • I uninstalled itunes.  when i reinstalled i get "Apple application support not found.  I have tried uninstalling and reinstalling again but same problem

    I uninstalled itunes and when I reinstalled it I get "Apple application support not not found."  Uninstall and then install.  Tried and not helping.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Trying to install itunes on win 8.1.  keep getting error apple application support not found.  asks me to uninstall and install itunes.  i tried several times and keep getting same error.

    trying to install itunes on win 8.1.  keep getting error apple application support not found.  asks me to uninstall and install itunes.  i tried several times and keep getting same error.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Tried syncing entire music library to ipod but some albums were skipped.  tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

    I tried syncing entire music library to ipod.  some albums were skipped.  tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod?  the album is imported and not purchased thru itunes store.

    Does it play in iTunes on the computer? What is the format of the album?
    Right click and select Get Info. Look under File in iTunes 12

  • HT6154 I dropped my IPhone 5S on the floor by accident. It not coming on. I tried to turn it on, but it does not do anything - totally dead.  What can I do?

    Please help me.  I just dropped my IPhone 5S on the floor by accident. Is completely dead.  I tried to turn it on, but nothing happens.  Black screen, no notice,nothing at all.  What can I do?

    Take it to an Apple store and have them check it out.
    It may be something simple (connector popped off).
    If not, out of warranty replacement (accidental damage) is $269.

  • I just installed 10.2.2. When I tried to start iTunes, I got the message that Rosetta needed to be installed to open iTunes. It downloaded and installed Rosetta but iTunes will not open and it no longer has the iTunes icon. What do I do now?

    I installed iTunes 10.2.2. When I tried to open it, I got the message that iTunes needs to install Rosetta to open. It then appeared to download and and install Rosetta. When I try to open iTunes, the icon bounces but iTunes does not open. The icon has also changed from the usual iTunes icon. What do I do now?

    I have a 2010 MBP15 which I do not use as much as my pc. When I do, I check for updates and I believe I updated iTunes to 10.2.2 a week or so ago. Since I still use iTunes primarily on my pc, I didn't bother firing up the updated iTunes on the mac.
    Last week, when I actually started iTunes on the mac, I got the message that Rosetta needed to be installed. Like abefighter I stalled. I surfed the net, read this thread to get some hints as to w** was going on.
    When I checked the system profile in the mac, I think it showed PowerPC for 'kind.' Surfing the Internet I found out Rosetta was something needed to help applications work on PowerPCs. But wait, since this MBP is an Intel, why would or should it be asking me for some stone-age plug-in that was never mentioned in all the previous updates for iTunes until now? Fyi, the iTunes icon on the dock had changed to what I think is an AppleWorks icon.
    So, I assumed that the update that resulted in my mac was corrupted. At first I scoured for 10.2.1, thinking that the last version was a dud, but in vain, nowhere to be found. I gave up and settled for a fresh 10.2.2. I did a casual delete, without touching any of the related personal preference files in my folder and it now which works fine. I'm glad I didn't jump to install Rosetta; I read elsewhere about someone who actually went through with the Rosetta install that resulted unhappily.
    Unless the mac in question is a PowerPC, I would doubt the need for Rosetta installation.

  • Start up error message - Entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll.  Happened after Itunes up date I think. Have tried uninstalling and installing nothing works.  Help please

    At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll.  I have uninstalled it and reinstalled but it does not fix the problem.  Happened after Itunes update I think.

    It's a simple fix and doesn't involve reinstalling anything.
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • My ituneswill not open and i have uninstalled and redownloaded itunes but still will not open. Says mobile device not working what should i do?

    itunes will not work

    Hey ssands0611,
    When you uninstalled and reinstalled, did you use this article?
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you haven't already done these steps, this section contains information that might help your situation:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article helped at all.
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I have uninstalled and reinstalled Firefox, but it will not start up upon clicking

    Firefox will not start up. I have uninstalled, reinstalled, done a system restore, and nothing works. I can use Internet Explorer, Google Chrome, and it works fine, but all of my saved information on Firefox is not available.

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • HT201077 I have downloaded and installed iCloud, but I can not open it.

    After downloading and installing, signing in and getting the icon on my dock, why can I not OPEN it?

    It isn't clear what you have done. You can't download iCloud, there isn't a download, it comes as part of the operating system. Also there is no Dock icon for iCloud.

  • I bought a new computer and installed itunes but it will not recgonize i pad

    how do i get my computer to recgonize my i pad ?

    You can try this - quit iTunes, reboot your PC, restart the iPad and then try again. Use a USB port on the computer - do not use a hub. Remove any unnecessary USB devices while you are trying to iTunes to see the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If those things to be prove unsuccessful .....
    Apple - Support - iPad - iTunes Assistant
    iOS: Device not recognized in iTunes for Windows

  • HT5492 Can't open my ibook store anymore on my iPad tried deleting and installing again but the store button in not able to be pushed

    I can not open the store in iBooks any longer the button is there but is not available i have tried deleting after I sync to my computer and reloading and same problem
    Any ideas
    Squeaker3254

    You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

Maybe you are looking for

  • Firecox constantly crashes when Shockwave is playing

    Whenever I am playing a video, such as on www.cbs.com, shockwave will crash. And it's not always because of shockwave. I could just be on Facebook, not playing a video or anything and the page will just crash. Here is an example of the report. Adapte

  • Xperia Z1 4.4.4 Update Issues (14.4.A.0.155 and .157)

    Well, our much anticipated 4.4.4 has join the party. But unfortunately I found a bug already in my quite new Xperia Z1 which I  bought 10 days ago & updated last night to 4.4.4 from 4.4.2.   Found a problem. I don't know whether this is only in my ph

  • I can't import video from my canon ixus 700...help

    The first time I plugged my new canon ixus 700 into my powerpook G4 all the photos and videos from the camera were imported with no problem. Since then, I have been unable to import my movies from the camera but the pictures import with no problem. I

  • Discover App don't working anymore.

    Hello! I purchased the Discover Application and all worked OK until yesterday, when I tap in the application, the program only show me an blank page forever. I must press the HOME button to exit. I remove the application from iTunes and the iPhone an

  • Max RF Power Spec

    I am looking for the Maximum Power Settings Spec for the 3600 AP.  The one from 2008 is too old. Does an update exist? The AP Spec itself does not show power levels by channel and regulatory domain which is what I need. If I can't get the spec, I wil