My wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting etc, doesn't help

my wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting, etc, doesn't help!
any suggestions?
jonathan

neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself.  with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background.  that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox

Similar Messages

  • I cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

    i cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

    Definitely sounds like an issue with your Wi-Fi network. Do any other devices on the network have similar issues? Is it an issue only with downloading apps? You can check by trying to load a website in Safari.
    I would try turning your Wi-Fi router off for 1 minute, and back on again.
    After doing that, disconnect and re-join the Wi-Fi network on your iPhone and try downloading an app again.

  • My iPod touch 5 has been losing wifi connection and crashing. It has also lost the correct time. I've reset and rebooted, but nothing has helped. Any ideas?

    My daughter's iPod touch 5 first crashed when listening to iTunes Radio, then it started losing my wifi connection, especially if We went to safari to search. The screen continues to crash, by turning dim then black very suddenly, or green with lines then black. I've rebooted. I've reset. I've tried backing up onto iTunes for a restoration, but have lost many pictures and some apps. One other strange occurrence is that the time has changed on its own. It's like it's possessed. Please help.

    It states the iOS 7.0.2 is up to date. Also continues to lose wifi while trying to check this.
    The crashing is what is slowing time down, I think. It's a half hour off already

  • When I don't use my iphone, my wifi connection stops

    since a few days my wifi connection stops when I don't use my Iphone. So when someone send me a messag with whatsapp I don't receive it untill I turn on, use my iphone back. What do I have to do so that my wifi is always on? I did'nt change anything on my Iphone, but it does'nt work since a few days.

    I just don't understand one thing. Before last week I had no problems about it (I had wifi all the time, even when I did'nt use my iphone, and now (when I came back from holiday) it does'nt go anymore. So buying a iphone wasn't a good idea. I have wifi, but if I don't use my iphone it is not possibel to reach me because the wifi falls off.
    I understand that it is for saving the battery. But I still don't understand that it stops working (my wifi).
    when I don't use my iphone, my wifi connection stops 

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • How do i get a wifi connection at home for my ipad from a imac

    how do i get a wifi connection at home for my ipad from a imac

    If you have a wired connection to the iMac and you are asking about using the iMac for the Internet connection for the iPad, you will need to use Internet Sharing on the Mac.
    No clue which OS version you run on the Mac, but here is a link to help with 10.6 and this will get you started. You can Google " Internet sharing with Mac OS ...." and come up with a number of support articles.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8156.html

  • My ipad 1 loses wifi connections when it goes to sllep. have to go into settings to reconnect. Does this all the time. please help.

    my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

    my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

  • Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

  • Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help? KC

    Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help?
    Kin Chi

    I get in now with the following procedures taken:
    1. Reset network as suggested in Apple app.
    2. In the wifi connection, instead click in the user name as shown in the screen, I click Others and re-type the user name as appeared before. In the security, instead of none, I click WEP. It will then prompt you to put in password. I then put in password as I know for that user name again.
    Then, it joined the wifi..
    Hope this can help someone who get this problem.
    Kin Chi

  • Everytime i try to update my itunes it says make sure your network setting are correct and your network connection is active . what does that mean

    Everytime i try to update my itunes it says make sure your network setting are correct and your network connection is active . what does that mean??

    Are yo getting a network timeout error?
    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • When I bootup my Macbook my family's PCs  wifi connections stop working !

    Hi everybody, when my nephew boots up his Macbook (Snow Leopard 10.6.5) he can regularly surf the web through a wireless router. However the wifi connection on other devices (Windows Vista notebook PCs, Linux Pcs, Windows 2000 PC, Playstation 3 wireless, PSP, Xbox ecc.) stops working. When he shuts off his Macbook, wifi connection on Windows/Linux PCs etc. starts to work again.
    I've had similar issues only with a wireless TV signal transmitter (working at 2.54 GHZ). When it is on, wifi connection is impossible, no matter what channel is selected (it has 4 channels).
    What to do with my nephew's Macbook? I can see that every 10 seconds Airport is searching for wireless signals (the wifi led on the router blinks), but no other traffic is sent/received so I don't think it's a bandwidth problem.
    Can Airport be shut off and can I connect to wifi router without airport using other apps or using a terminal (console) application (I use Linux and many commands are the same, i.e " iwconfig - ifconfig ")?
    Maybe it's the transmitting power of MAcbook wifi device (too strong?). Can it be modified? I'm not a Mac guru... In linux there is a command, say "iwconfig wifi0 txpower 20mW " to tell the wifi driver to use 20 mW transmitting power on wifi0 device. In that Macbook the wifi device is called "en1"...
    Many thanks in advance for good ideas..!

    Many thanks for such a fast answer!
    @ a brody
    I have so many wifi devices (at least 17) I don't want to create a MAC address filtering rule for each one of them! I don't ever know if my router can accept filters on so many MAC addresses!! But I will try out your suggestion if I can't solve in other way.. Thank you!
    @ J D McIninch
    Thank you, I will try... However, my router don't need to be restarted to get online again: when my nephew shuts off his Macbook the wifi connection is all ok. How could it be that a routing table gets corrupted when the Macbook is on, and that very same routing table gets repaired as soon as the Macbook is shut down? I'm sure, however, my router is a pre-N one ( Belkin modem/router bought in 2004, 802.11 b/g 54Mb with 125Mb turbo mode feature always turned off for backward wifi compatibility)
    Thanks

  • WIFI connections stop working in lion

    Since upgrading to Lion the wifi connection between my computers has stopped working
    or ar best works really sloooooowly.
    I have 3 macs, I use wifi at times to talk to them all, in particular from my Mac Book Pro
    which moves around a lot.
    Since the upgrade connecting to my local network has been slow, Today it stopped working completely.
    I use CMD-K to call up the network browse and clicking BROWSE I see a list of attached computers. Double clicking the one I want the folders on the remote system pop open very quickly under Snow Leopard. Now it is a big problem and the Mac Book Pro procedure causes nothing at all to happen. This is quite serious BS as I use these tools in this configuration for my work. It is no longer fast, or does not work at all.
    The computers I am using
    Mac Book Pro mid-2010. i7 with Lion 10.7 and WIFI enabled and internet working ok, just the connect to my other computers is failing.
    iMac 20 inch aluminum mid 2008, core 2 duo, WIFI enabled, also ethernet to ADSL modem. Internet OK. Lion 10.7
    MacMini late 2010, core 2 duo, Snow Leopard 10.6.8, Ethernet connection to ADSL modem. Internet OK.
    Anyone else having a problem like this? Today is the first day it just failed. Today I upgraded the iMac to 10.7 Lion and it is after trying to connect with MB Pro Lion that it just fails to connect to the iMac at all, returns no errors.

    I am having the same issue.  I've been struggling with figuring out if it's Verizon or Lion because whenever the internet is down on my mac it's also down on my PC, but it began exactly when I upgraded to Lion.  I have yet to find an answer to this problem and have been on the phone with Verizon numerous times to try and fix the issue.  The only thing that helps is to restart my Verizon modem/router and then my internet is re-established for about 6-8 hours.  It's extremely frustrating and the only thing I have been able to find on blogs is that other people are experiencing the same problems without resolution.

  • Why does my wifi connection stop working sometimes?

    Hello.
    Maybe this has already been answered and I'm sorry but I didnt know what word to use in english to find the exact problem in google lol.
    Well, The problem is that my wifi connection seems to stop working sometimes, it takes about 1 to 10 min and then it just comes back. I can notice it because Safari stop to load pages, the appstore doesnt load, and I tried with google chrome : same results
    I experience this about 2 to 5 times a day, it's just pretty annoying. The wifi logo shows that it is always connected, it never shows that he is reconnecting
    May this be a router problem...? Or simply the computer
    My specs : 1,6GHz, intel core i5
    2go of RAM. It's a 2 years old MBA
    Thanls a lot !

    Hi CPUGenuis!
    I have an article for you that addresses this situation and will help you troubleshoot this issue:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.
    See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • My wifi connection stops when I pause use, I can get it back by switching it off then on again.

    Please help, I keep losing my wifi connection and have to switch wifi off and on again to reconnect?

    Maybe this?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • PDP with classic scenario

    Hello, I am working with SRM 7.0 and ECC 6.0. 1) I would like to know how do you transfer PR to SRM in classic scenario?    Is it the same as for extended classic scenario (using program BBP_EXTREQ_TRANSFER)? 2) How do you create PO in backend for di

  • Synchronize with Testing Server?

    If I have not set up a remote server, only my local testing server, is there a way to Get the files from the testing server? I've done a lot of work that's currently only being saved on the testing server because it's through wordpress and I don't wa

  • How to disable remote wipe option for mobile devices

    Hi, I have integrated environment of SCCM 2012 R2 and Windows Intune. I am managing Windows phone, Android and IOS devices through this setup. I was trying find an option to disable remote wipe option in the SCCM Console. Only selective wipe should b

  • Unable to transfer files over network

    Hi all I'm trying to transfer some folders from my MBP to my iMac over a wireless network, but I get a series of 3 error messages when I try it. First I get "You may need to enter the name and password for an administrator on this computer to change

  • Thinking about the upgrade

    Hey all, I'm considering upgrading from 10.4.10 to Leoperd. In fact I'm really liking the box set. My question is how has the "Snow Leoperd" thing been working out I have a Macbook Pro (previous version) with 4GB ram. I also work with Final Cut Expre