Synchronize with Testing Server?

If I have not set up a remote server, only my local testing server, is there a way to Get the files from the testing server? I've done a lot of work that's currently only being saved on the testing server because it's through wordpress and I don't want to lose it. Dreamweaver (CS4) only referrs to "get newer files from remote site" which is confusing considering I don't have one set up. When I try synchronizing that way it's synching thousands of files and it's having trouble "getting" files such as my faqs.php. Could this be a permissions issue?

dalenhughes wrote:
If I have not set up a remote server, only my local testing server, is there a way to Get the files from the testing server? I've done a lot of work that's currently only being saved on the testing server because it's through wordpress and I don't want to lose it. Dreamweaver (CS4) only referrs to "get newer files from remote site" which is confusing considering I don't have one set up. When I try synchronizing that way it's synching thousands of files and it's having trouble "getting" files such as my faqs.php. Could this be a permissions issue?
Yes it is possible because Wordpress has nothing to do with DW. Having said so, all you need to do is this:
1) Setup your remote server with Wordpress installed and all databases created;
2) Backup your localhost databases using the methods given in this article:
<http://tinyurl.com/ypvg83>
3) Restore the backed up databases to your remote server using the method given in this article:
<http://tinyurl.com/5r4nv9>
Finally, may I suggest that you should stop using DW to update your Wordpress website because Wordpress works completely differently from DW. DW uses simple flat text files that can be manipulated using any text editor. Wordpress uses its own framework that posts all data to a MYSQL database.
hth

Similar Messages

TS3899 I was on ios 6.1. and i received a email from Microsoft outlook saying "Your phone won't be able to synchronize with the server via Exchange ActiveSync because of an access policy defined on the server."

However i have now updated to the latest ios 7.0.2, and i am still unable to synchronize with the server via Exchange ActiveSync.
Please advice.

i did, and the tech cust. service rep. told me to contact Apple

All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010

Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Help with Test Server & Binding Recordset ASP-SQL

Using CS 3.3/DW. Behavior is the same on two different
machines. One is Vista Home Premium SP1 IIS 7 with 6 compatability,
other is XP SP 3 IIS 5.1, both have IE 7 and full SQL 2005 with
SP's.
Haven't gotten very far away from static page yet, because I
can't test. Have scoured forums and even talked to Adobe who
recreated the problem then told me that they hadn't done sufficient
testing to SQL 2005 prior to release, were supposed to call me
back, did once, supposed to call back again and haven't (3 days).
So I'm turning to the community for help, please.
Set up test server in folder 'TServer' under
C:\inetpub\wwwroot. Built a 'Hello World' ASP/VB Script page with
no data attached, tests fine, puts in the appropriate folder and
says "Hello World" in browser like a good little box should! Have
built many DSN's, they tested during the building fine, I've tried
various versions of ODBC and OLE DB, including but not limited to
Native SQL Client, which is my preference and have been quite
successful setting up the DSN's...they add to the ASP page/Site
(it's greyed out unless you have an open ASP page) fine. Test at
that point works fine. As soon as I bind a Recordset (whether I
have dropped data on the page or not...same 'Hello World' page with
Recordset info near the top of the code) and test, I error out.
Any thoughts? I'm sure you'll need more info...I've tried to
put as much as I can for starters. Thanks in advance.
Peter

When you say that you error out, what error are you getting?
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Fordwebs, LLC
http://www.fordwebs.com
"Peter AZ" <[email protected]> wrote in
message news:g5qb7n$n30$[email protected]..
> Using CS 3.3/DW. Behavior is the same on two different
machines. One is Vista
> Home Premium SP1 IIS 7 with 6 compatability, other is XP
SP 3 IIS 5.1, both
> have IE 7 and full SQL 2005 with SP's.
>
> Haven't gotten very far away from static page yet,
because I can't test. Have
> scoured forums and even talked to Adobe who recreated
the problem then told me
> that they hadn't done sufficient testing to SQL 2005
prior to release, were
> supposed to call me back, did once, supposed to call
back again and haven't (3
> days). So I'm turning to the community for help, please.
>
> Set up test server in folder 'TServer' under
C:\inetpub\wwwroot. Built a
> 'Hello World' ASP/VB Script page with no data attached,
tests fine, puts in the
> appropriate folder and says "Hello World" in browser
like a good little box
> should! Have built many DSN's, they tested during the
building fine, I've tried
> various versions of ODBC and OLE DB, including but not
limited to Native SQL
> Client, which is my preference and have been quite
successful setting up the
> DSN's...they add to the ASP page/Site (it's greyed out
unless you have an open
> ASP page) fine. Test at that point works fine. As soon
as I bind a Recordset
> (whether I have dropped data on the page or not...same
'Hello World' page with
> Recordset info near the top of the code) and test, I
error out.
>
> Any thoughts? I'm sure you'll need more info...I've
tried to put as much as I
> can for starters. Thanks in advance.
>
> Peter
>
>

Address Book can't synchronize with Exchange server using a domain prefix

I'm having problems attempting to use Address Book's built in "Synchronize with Exchange" feature. The issue seems to be that my company uses domains with their exchange server, so I login with a username like "domain/user" rather than just "user"
iSync finds my server if I just use the "user" login, but the server won't accept the login and I get a failed login error.
When I use the same server with my "domain/user" login I get this error:
"iSync couldn't connect to Exchange. Could not reach the server specified."
It seems that the "domain/" is fooling Address Book into altering the server URL to an invalid address. When I return to the preferences I see that it has changed the URL to http://www.server.com/exchange/domain/user
I've found a bunch of people on the web with this problem, but no solutions. Anyone have any ideas?

I'm having the exact same problem... worked fine until I did a clean install Last week.
anyone figured out a fix or workaround ?

Help with testing server

Ok I may have been a little dramatic about getting fired. But
I have a problem. I am trying to create a register page. I need to
set up a test server right? I use a hosting site online. Now here
is the problem:
I don't know how to set it up! I need to know what the root
folder on the testing server is. How do I find out?

Site > Manage Sites > mysite > edit > testing
server
Select Server Type and access
Now the testing server folder changes and depends on the
choices above...
If Testserver is local it is simply the absolute path to the
folder
(e.g. C:\www\mysite\).
If online the folder my be something like
/public_html/myfolder/ or
inetpub/myfolder/
and for the URL prefix it is simply the URL you would use in
your
browser to access the site:
http://localhost/myfolder/
http://mydomain.com/myfolder/
Please note: If you have a local server installed (e.g.
Apache, IIS),
and you want to preview your active scripts you have to make
sure that
your site is in the root folder of your local server. Check
your server
configuration...
I always use a local testserver, so I hope I didn't give you
any
misinformation about using a online testserver...
Anurag
looksgood25 wrote:
> Ok I may have been a little dramatic about getting
fired. But I have a problem.
> I am trying to create a register page. I need to set up
a test server right? I
> use a hosting site online. Now here is the problem:
>
> I don't know how to set it up! I need to know what the
root folder on the
> testing server is. How do I find out?
>

Can't synchronize with Directory Server

I am using IdM 8.0.0.1 and Sun Directory Server EE 6.3.
I have created a server instance and suffix in DS and enabled Retro Changelog plug-in.
In IdM I have created a LDAP resource for the DS. The synchronization policy uses the same base context as the suffix and the changenumber attribute.
My problem is that when starting synchronization, IdM looks for changenumbers larger than the the last changenumber in the changelog suffix.
If I create a user in IdM and assigns the DS resource, the user is created in DS. Changes to e.g. the name in DS is shown in IdM but a sync results in an error in the sync log: java.util.ArrayList cannot be cast to java.lang.String.
I hope all this makes some sort of sense and even more, I hope someone can help me make this work.
Thank you in advance.
Stefan

I don't see any references in the error, and I only changed the name attribute so I don't think that is the problem.
I tried something else: I used Load from Resource to do the first import of users from DS to IdM. This worked as expected so now I have some users to play with. But when I create a new user in DS and starts a Sync, nothing happens. I would expect the new user to be sync'ed into IdM?
And IdM still uses the last changenumber+1 as start point - This explains why nothing is sync'ed, but I don't understand why IdM behaves like that or where the start point comes from?
If anyone can point me to a few tutorials on synchronization, I would appreciate it very much.
Stefan

Synchronization with Mobile Server using Websphere MQ

Hi!
Can anybody tell me how to carry out synchronization between Lite and Mobile Server via Websphere MQ messaging system? Unfortunately, in our case MQ queues is the only way to communicate between Mobile client and Mobile Server thus we can't use HTTP-connection what Mobile Server supports. Maybe there're some products what can transmit HTTP requests/responses via message queues (tunneling)?
Thanks in advance!
Serguei

Please contact Oracle Russia, Sergey Danilov +7 095 258 41 80 to get your question answered properly. The answer is yes by implementing your own (message based) transport protocol.

"Synchronization with your WinRT failed for 1 items." error from exchange server

My client uses exchange 2007/2010 servers. In case of a 2007 exchange server, I get an email when I setup my client to synchronize
with the server:
Microsoft Exchange was unable to send the following items to your mobile device. These items have not been deleted. You should be able to access them using either Outlook or Outlook Web Access.
Item Folder:
Contacts
Item Type:
IPM.Contact
Item Created:
12/5/2014 6:20:07 AM
Item Subject:
Test Test
This error comes for all the contacts present for the user on the exchange server.
I traced all the commands and responses in fiddler and there is no sync error for any of the sync/ping commands. Any idea what might
cause this error?

Hi Ashish,
Kindly refer to the below KB, might help
http://support.microsoft.com/kb/2563324
It speaks about Update Rollup 4 for Exchange Server 2007 Service Pack 3.
Kindly check and share your inputs, if this worked for you.
Thanks & Regards
John Chris

IRM - Synchronization (IRM desktop with IRM server)

I have the following question regarding IRM:
Failure to synchronize with the main server after the time interval identified by the administrator for the document must result in the inability of user to access the document until a successful connection with the document is successfully established
Is this supported? I couldn't find any information about connection failure
Thanks

Yes, that's how it works. When an IRM Desktop retrieves the rights to a context (also known as a License), the license is issued with a certain valid time window. This is the total window for which it is valid. If the IRM Desktop fails to connect to the server within that time, the license will expire and access to any documents sealed to that context will cease immediately (any open documents will be closed there and then). Once the IRM Desktop synchronizes with the server, a new license is retrieved and your rights are reactivated.
Now this would be very tedious if you had to wait for license to expire before renewing it. So we also give you the ability to schedule synchronisations independently of the license lifetime. So now we are dealing with two time intervals:
1. The lifetime allowed by the administrator for an end-user to be able to use documents without synchronisation (what we call offline usage).
2. The synchronisation interval.
One typical combination of intervals is a 3-day lifetime with daily synchronisation. This means that provided your end-user has been on the network on a Friday, they can continue to use sealed documents over the weekend, thus guaranteeing access to necessary documentation (quite common with board members etc).
The schedules are set on the IRM Server via the Enterprise Manage Control Console. See Section 9.3 Configuring Oracle IRM of the Administrator's Guide for Oracle IRM Server which is here:
http://download.oracle.com/docs/cd/E17904_01/admin.1111/e12321/toc.htm
I hope this makes sense.
Frank.

Problems setting up testing server CS5 with existing PhP site copied to hard drive

A couple of years ago I dabbled in CS3 & PhP, but haven't touched it since 2009. I still have WAMP loaded on my machines. I'm now in a work situation where I was asked to see if I could make some simple copy updates to sites written in PhP. I copied the entire sites over to my hard drive, and placed them in the WAMP www root folder, and followed instructions to setting up the site in CS5 (which is pretty close to the CS3 setup). I made sure WAMP was running, and I'm still unable to connect. I am using "localhost" as part of the URL for the web server designation. I continue to get an "internal server error" message on these pages. I am able to, from my browser, type in "http:localhost" and it appears that WAMP is running properly. And I do remember to start WAMP before I start a DW session.
So, I kept experimenting. If I define a new PhP site and create a test document with simple PhP code, the connection to the testing server works and renders the code. It's just the existing PhP site I've copied over generates the Internal server message.
Is there something basic I'm not understanding about viewing and manipulating a PhP site created by someone else using DW CS5?

The first question: on what platform? Windows - Mac?
I only succeeded in setting up a testing server on my Mac
with PHP and MySQL after reading a book of David Powers. On Leopard
I belief there still are problems connecting PHP to MySQL.

Setting up Dreamweaver CS4 with PHP testing server... Live View doesnt work

Hello,
Im trying to setup Dreamweaver CS4 with a php website im
making. Ive setup the site information, and provided a testing site
(XAMPP), and i can see the fully rendered .php pages in the Live
View tab. However, say i change some of the text in the .php file
(say from Hello to Hi) and
then click in the Live View tab - the page does not update. It
seems to do something, bit just returns the same.
How do i set it up so, like with plain .html pages, you can
make a change to the source code and instantly see the change in
Live View?
(At the moment i have to make the change to the source code,
save it, click Live View to cancel it, and then click Live View
again).
Background:
Ive setup XAMPP (G:\XAMPP\)
Ive setup vhosts in apache.
Ive stored my websites in G:\Websites
Ive set the testing server to G:\Websites\site, where "site"
is setup as a vhost and correctly displays when entered into a
browser.
Ive set the url prefix to
http://site/
Ive set local root to G:\Websites\site
Any help would be greatly appreciated.
Cheers.

> How do i set it up so, like with plain .html pages, you
can make a change
> to
> the source code and instantly see the change in Live
View?
Did you try using F5 to refresh the page? If that doesn't
work for you,
then you'll have to drop and restart Live view. No need to
save and reload
the page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Major_Disaster" <[email protected]> wrote
in message
news:gibqir$lgu$[email protected]..
> Hello,
>
> Im trying to setup Dreamweaver CS4 with a php website im
making. Ive setup
> the
> site information, and provided a testing site (XAMPP),
and i can see the
> fully
> rendered .php pages in the Live View tab. However, say i
change some of
> the
> text in the .php file (say from Hello
to Hi) and then click
> in
> the Live View tab - the page does not update. It seems
to do something,
> bit
> just returns the same.
>
> How do i set it up so, like with plain .html pages, you
can make a change
> to
> the source code and instantly see the change in Live
View?
>
> (At the moment i have to make the change to the source
code, save it,
> click
> Live View to cancel it, and then click Live View again).
>
> Background:
> Ive setup XAMPP (G:\XAMPP\)
> Ive setup vhosts in apache.
> Ive stored my websites in G:\Websites
> Ive set the testing server to G:\Websites\site, where
"site" is setup as a
> vhost and correctly displays when entered into a
browser.
> Ive set the url prefix to
http://site/
> Ive set local root to G:\Websites\site
>
> Any help would be greatly appreciated.
>
> Cheers.
>

Solution to using Site Root with Sub-folders on Testing Server & Browser Previews

Hi Everyone
Have found an elegant solution when using Site Root relative linking for a website, that allows browser previews, even when the testing server uses sub-folders and the live code references just the server site root " / " of the live server and not the sub-folder structure of the testing server. This is really useful when you don't want to use document relative linking, which normally takes care of this problem in Dreamweaver.
The solution is to use sub-domains referencing the sub-folders on the testing server, so the sub-folders appear as the root of each website and the html code pointing to the site root works correctly on both testing & live servers without alteration.
Testing Server Setup
One testing server domain is used for all client development work:
For example: www.testingserver.com
On the testing server there are multiple sub-folder (one for each client website being developed):
For example: www.testingserver.com/clientA/ , www.testingserver.com/clientB/ , www.testingserver.com/clientC/
Live Server Setup
The site code needs to be developed with the final live server folder structure (url references) in mind:
For example: www.livesite.com (with all pages referencing the root of the live site server)
Page URLs on Testing & Live Servers
/page-name.html
Testing server url: www.testingserver.com/clientA/page-name.html
Live server url: www.livesite.com/page-name.html (without /clientA/ sub-folder)
Browser Previews Don't Work
You want to be able to run browser previews on the testing server while developing the website. To do this you normally have to reference the sub-folder structure of the testing server in the url for things to work right:
For example www.testingserver.com/clientA/page-name.html
What do you do, when you can't keep switching all the urls in the code from pointing to the sub-folder to pointing to the site root, and you don't want to use document relative linking?
One Solution - Sub-domains on Testing Server
In your domain hosting (outside of Dreamweaver) setup a sub-domain to point to the testing server sub-folder.
For example: Sub-domain clientA.testingserver.com points to www.testingserver.com/clientA (sub-folder)
So now when you reference the sub-domain it sees the sub-folder as the site root and all your problems are solved.
Dreamweaver Site Definition Setup
Site Definition under "Local Info"
Links relative to: Site Root
Site Definition under "Remote Info" (live server)
Access: FTP
FTP host: ftp.livesite.com
Host directory: /
Site Definition under "Testing Server"
Access: FTP
FTP host: clientA.testingserver.com
Host directory: /
URL prefix: http://clientA.testingserver.com
(location of the site's root folder on the testing server, the sub-domain redirection takes care of pointing to the sub-folder)
This is just one solution but it works well for me as it doesn't have any cost associated with it under our hosting package where you can have multiple sub-domains setup.
Hope this helps someone in a similar situation.
Aly

Just Google it, or run out and buy a copy of David Powers' Foundations Dreamweaver CS4 with CSS, Ajax and PHP, a book that is never out of reach for me. He details the process explicitly for both Mac and PC.
For me, on W7, I edit the C:/Windows/System32/drivers/etc/hosts file, and add the ip of my testing server along with the site alias -
192.168.1.82 site.local
Then I add this same designation to my httpd.conf file in Apache on the testing server. Finally I restart Apache.
Now from my production machine if I browse to "http://site.local", I get to see either the default file in the root of the site on the testing server, or a directory of the site on the testing server (my testing server is a unix box running on my LAN at that ip address). Furthermore, all of my root relative links now work as they would if the pages were being browsed from the live server.

Issue with Setting Up Test Server for PHP/MySQL to work

I've got a few newbie issues
which I hope someone can help with!
I'm trying to get Security Assist to work, so I've put MYSQL and workbench on my computer to get it going. I haven't created a test server in PHP, because I'm wondering if it will affect my already running website ftp? Will it take down my company website if I create a test server with the same ftp as my website?
So, I created a model in workbench (table) and I've tried to connect mysql to dreamweaver. I keep getting an error when I try to connect!
Despite the error saying an error has occurred..I have something which looks like a plus (+) sitting in my database area on DW, but it says there's no tables there! And in mysql there is a table!
I'm a bit bloody lost to tell you the truth. Just changing the password on mysql to get going was horrendous.
Anybody have a solution to get me going, so that my tables are sitting nicely in my dW and can be connected to my SA (Security Assist).
Ugh!

The first question: on what platform? Windows - Mac?
I only succeeded in setting up a testing server on my Mac
with PHP and MySQL after reading a book of David Powers. On Leopard
I belief there still are problems connecting PHP to MySQL.

FM to read files starting with TEST(for example) from Unix server

Hi all,
Is there a FM to read all the files which start with TEST (for example) from the Unix server?
Requirement is if we put TEST* in the selection screen for the filename, it should read all the files which start with TEST from the default Unix path.
Thanks and regards,
Anishur

Function Modules
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful.........
Minal

Synchronize with Testing Server?

Similar Messages

Maybe you are looking for