My wifi on my iphone 4 wont turn onand i have restarted it multipul times and even reseted network settings and nothin has worked what do i need to do?
my wifi on my iphone 4 wont turn on at all i have tried everything restarting my phone to reseting network settings nothin has worked also my phone has been really slow and my apps will close out over and over and sometimes myphone will just lock itsself what do i need to do to fix it????? #needingsomehelp!:(
Restore your iPhone > iTunes: Restoring iOS software
Similar Messages
-
I have an iphone 6 plus, although out of no where, it gave me the notification of no service. I've already shut it off and turned it back on several times and even reset the network settings, but it continues saying likewise. What do I do?
FIRST, call your carrier and ask if they have a local network outage. Also try moving a few miles from your current location to see if you have coverage elsewhere. Next, contact your carrier and get a replacement SIM. If that doesn't fix it take it to an Apple store for evaluation. If it is defective they will replace it.
-
Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have an ipad4. Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?
Hi CollinGCC78,
It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
- Brenden -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help?
Kin ChiI get in now with the following procedures taken:
1. Reset network as suggested in Apple app.
2. In the wifi connection, instead click in the user name as shown in the screen, I click Others and re-type the user name as appeared before. In the security, instead of none, I click WEP. It will then prompt you to put in password. I then put in password as I know for that user name again.
Then, it joined the wifi..
Hope this can help someone who get this problem.
Kin Chi -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Hi, My Iphone 4 will not connect to my virgin superhub (netgear). Ive reset network settings with no joy, Reset all the phones settings also no joy. Ive rebooted the hub and none of it works. My ipad has connected to it not problem so doesnt make sense. Ive read that it could possibly be my phones wifi signal reciever may not be strong enough but on my handset it shows as full bars!!! Any ideas would be really appreciated.
ThanksI had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub. -
iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?
Call your phone carrier - that's a problem for them to resolve.
-
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
-
A message keeps popping up when I try to join my network that says, "unable to join the network."
I have already reset network settings and restored ipod to original settings.
I already updated iTunes and upgraded iPod to iOS 6.
The password is correct. I even made sure by checking my wifi account.
I have completely restarted my internet connection multiple times.
I have also restarted my ipod multiple times
My wifi was working on my iPod yesterday before I reset all settings.
I updated it yesterday to iOS 5. Still didn't work.
It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
Safari still wasn't working, though.
I did the sensible thing and I reset my network connection.
Now, the password isn't working and there's no wifi signal.
The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>? -
I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and am still getting the error message. What is the fix?
Thanks so much for more direction.
I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec. I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7. Today Apple released v. 11 of iTunes which I was instructed to download. It's TOTALLY different from iTunes 10.7 - drastically different in fact.
The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK. With v. 11 of iTunes I can't even find the restore option!!! The phone Rep will have to help me navigate v. 11 of iTunes. It doesn't seem intuitive at all. Maybe it's just me?!?!
Thank you for sending this new link for firmware. It's not clear to me right now whether I'll need it or not. The phone Rep will probably somehow be able to resolve the problem. If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty. I will give another update as to what transpires as a result of the phone call with the Apple Rep.
Again, thank you so much for helping me. -
if I Reset on iPhone, and tap Reset Network Settings.will i lose my contacts or apps?
Reset Network Settings does NOT affect any data on the device.
A reset of the device (holding the home and power buttons until the white Apple logo appears) does NOT affect any data on the device. -
My iPhone 4S is not letting me turn on my iPhone and I've reset network setting and restored it but it hasn't worked what do I do???
Hi Lullita.
This is a common problem on iphone 4s using ios 7.
I have had this problem myself.
Try basic troubleshooting : http://support.apple.com/kb/TS1559
If that doesnt help, try this.
Go to youtube and type this " 4s wifi grey" ... You will find a couple of videos describing a method which includes blowdrying your phone and puttin it into freezer. This method does fix your wifi, I know I have tried it myself, and it brought back my wifi and bluetooth, which were greyed out.
But be very careful, this method can damage your device if youre not careful enough. Do this at your own risk.
Hope I helped.
Donnie. -
iPhone 4 has stopped connecting to Internet on wifi and 3G . Resetting network settings did not fix problem Help please
Howdy TrumpetCharlie,
We've an article that can help get your WiFi working normally again.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen
Maybe you are looking for
-
About bdc rec & usage in target prog
hi guru's, after the bdc recording is done, ihave got it in to a new program. can u give how to proceed further. where to insert the forms & code of this bdc_rec in my target program. please, can u give me a step wise like u did earlier for recording
-
Best Practice for Nos of AM in application
Experts, Its wild question but still just want to know what is the right approach for AM. Should we have 1 AM for the entire application or multiple AMs thnks
-
Print during BAPI call in backround
Hi all... I am creating 351 movement using BAPI_GOODSMVT_CREATE in backround,during transfer Order confirmation...I want to print the details after job as been completed,is there any option to give in the BAPI function module... Note: If I do manuall
-
Gen Digital Pulse Train Finite Retriggerable - Initial Delay is only for first trigger
The DAQmx example Gen Digital Pulse Train Finite Retriggerable has an Initial Delay parameter. It appears (6602 and an E series card) that this Initial Delay only delays the pulse generation for the first trigger. Subsequent triggers show no delay. I
-
Urgent:ORA-12514: TNS:listener does not currently know of service requested
Database server LinuxAS4 10g oracle client in windows XP getting error lister.ora # listener.ora Network Configuration File: /home/oracle/product/network/ad stener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DE