My WRT160Nv2 settings? and airport express connection

Hello:
I like to know what settings for WRT160Nv2 router would be the best for airport extreme on a macbook. Also there is a problem that may or may not be related to the router that I would like help on. The problem is this: when I click on my linksys router from the drop down menu with airport extreme I have to keep on clicking the signal button on the top right so that the speed won't drop to zero and the webpages and downloads don't hang or stop loading. This particular linksys router is the only one with this problem as the other linksys routers and any other brands I've connected to do not have this problem. The signal level is always full and never blinks or get disconnected unless of course forced to. I don't really know but it sort of seems like it is not waiting at all for this router when it is suppose to. Help is very much appreciated.

By airport extreme you mean to say Airport on your Mac computer ?
Connect the modem to the Internet port of your Linksys router also connect the computer with the Ethernet cable to the Ethernet port on your Linksys router .
Press and hold the reset button on Linksys router for 30 seconds .
Power cycle the modem and router .
Open the setup page of Linksys router using the IP Address 192.168.1.1 ( User name= Leave blank , Password- admin ) .
Configure the Linksys router as per your Internet Service Provider .

Similar Messages

How to extend wifi range using Airport Extreme and Airport Express connected via ethernet cable

Hello,
I'm having an Airport Extreme fifth generation in my living room. I bought yesterday an Airport Express to extend the range of my WIFI in the house and I put in in my bed room. The two devices are connected together via an ethernet cable, from airport extreme (lan 1 port) to airport express to (wan port). Now from the airport utility what configuration I have to set to the airport express in order to extend my wifi range? Inside the wireless tab what i have to select in the network mode?
1. Create a wireless network (use same same wireless network name and pass work as the airport extreme)
2. Join a wireless network
3 Extend a wireless network ?
Thank you

You are way overthinking this. The utility will literally configure everything for you automatically. All that you need to do is name the device and click Next during the setup.
You can use your Mac using Mountain Lion or an iPhone or iPad.
Post back if you need the steps.

Time Capsule as iTunes HD and Airport Express connected to network

I purchased Time Capsule with the plan of making it my external HD for iTunes, wirelessly, not sure how to set that up.
Also I have Airport Express and would like to link it since TC does not have the connection outlets which allow the sound system to play wirelessly.
Thanks for the help.

Hello,
i know mine is a differen problem but you seem to know what you're talking about! I was using my powerbook s normal but trying to install an internet dongle. the whole thing froze so after a while i forced it to quit by holdng down the on button. when i started it up again i got to the login page and can logn and see my wallpaper but that is it - the finder and desktop never appear. The same happens if i login in as administrator and i don' think there are any other users on my machine. i feel like i have broken the hard-drive or something? i don't know what to do.
can you help?
M

Qwest DSL and Airport Express connection question

I've recently purchased DSL service from Qwest and I'm using an Actiontec GT701 modem (also supplied by Qwest). When plugging the ethernet cable directly into my iMac, I can easily connect to the internet. However, when I plug the ethernet cable into my AirPort Express and try to connect wirelessly, I've not had any success. The AirPort on my iMac easily locates the AX signal (as it will also do for the Qwest modem), but subsequent attempts to wirelessly connect to the internet do not work. I repeatedly get an error message: "Unable to connect to the internet" (or something similar).
Qwest customer support has not been able to provide any solutions.
Any suggestions will be most appreciated. Thanks very much.
Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)

Also, one other question: the DSL with Qwest is set up as a "PPPoA", and the iMac seems to be looking for a "PPPoE". Are these two compatible, or should I perform any additional set-up/configuration changes with the AX or my iMac?
No these represent two different methods of encapsulating the Point-to-Point Protocol (PPP).
PPPoE = Point-to-Point Protocol over Ethernet
PPPoA = Point-to-Point Protocol over ATM
This may represent a problem as, far as I know, AirPort products don't support PPPoA. Typically only the device directly connected to the ISP or the modem needs to be set up for either PPPoE/PPPoA. All other would use "Using DHCP."
I'm afraid I'm not too familiar with PPPoA setup. Maybe someone else in these Discussions can chime in.
You mentioned that you tried to change the DSL over to PPPoE. Is that an option that is available to you with the DSL service your ISP provides?

AirMac Extreme and Airport Express not working with Netgear N Router?

I've been using an AirMac Extreme (old model) as a wireless router, and Airport Express for it's airtunes functionality (conected to my Hi-Fi).
These used to work fine, and both would show up in my Airport Utility on my Macs.
I've now just upgraded to a 50MG broadband contract, and the engineer gave me a Network router as my old AirMac Extreme couldn't handle that bandwidth.
When I connected my AirMac Extreme to my Netgear router I then got conflicts, sometimes it wouldn't show up, and it really slowed down my wireless signal. As a result the contractor for my broadband recommended I disconnect my Air Mac Extreme from the router. Speeds went up for the internet, but now I can't get my airtunes to work.
What I want to know is can I just use my Netgear to transmit the broadband signal so I get maximum internet speeds, but then have my AirMac Extreme and Airport Express connected so that I can still listen to my itunes wirelessly?
Ideally I'd like this to all be set up so that I could be conected to the internet through the Netgear wirelessly and listen to my itunes through the Airport Express at the same time.
Thanks in advance for any advice.

I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group, I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

Had a Airport Express connected to my stereo and it was working. I brought an Airport Extreme and suddenly it took over and Airport Express stopped working and disappeared from Airport Utility. What I am supposed to do? ar2ro

I have an Airport Express connected to my stereo and it was working without any problem.
Recently I bought an Airport Extreme to use it as my Base Unit connecting it to my DSL.
I followed the instructions of the Airport Utility, and it started working.
Suddenly, problems started happen the Airport express that was connected to the stereo , stopped working and it disappeared from the Airport Utility area , as it did not exist in the network. I tried to reset it but it did not appear in the Airport Utility page.
Apparently I have other problems with the private network that it created because I cannot use it because of problems with the password that was created. I can only use the network that I created for my guest...
I dont know if my problem is a configuration problem or there is problem with the equipment.
I read that other users where having the same problem with the Airport express , using non apple equipment as their base unit , but I thought that using the Airport Extreme was going to be compatible and no problems would happen.
What should I do?

Common Problem. Common solution.
Connect your Express via ethernet cable to the Mac while other network connections on the Mac are switched OFF.
After the Express shows up, change the settings of the Express to join the existing network. Take the appr. settings.
Unplug and reconnect your Mac to the network.
Check if the Express shows up in Airport Utility
Alternative solution:
Hardreset the Express to factory settings
(while on power push the Pin next to the audio plug with a paperclip. Plug out the Express still holding down the little button then replug the Express to power and release button)
After that, the Express will show up in the Airport Utility.
Make all needed settings.
I would prefer the first solution, its easier just to plug a cat5 cable.

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

How to setup ADSL moden router and Airport Express 802.11n (1st Generation) to provide internet and airplay connections to multiple devices?

I have a Netgear wireless ADSL modem router (wireless + four ethernet out ports) that i'd like to connect to a 1st gen Airport Express to create a small home network to provide internet access for a MacBook, iPhone and Apple TV, and to provide Airplay connection to the Apple TV and Airport Express audio output jack.
I'd like to turn off the wireless function of the ADSL modem router, and to have from one of its ethernet out ports an ethernet cable providing internet directly connected to my MacBooks ethernet port.
Then from one of the other ethernet outs on the ADSL modem router an ethernet cable connected to the Airport Express's ethernet port. This would be to provide wireless internet connection for the Apple TV and iPhone via WiFi from the AE.
At the same time as the MacBook is receviing internet soley via the ethernet in port, i'd like it to have WiFi connection to the AE to provide Airplay connection to the Apple TV and the AE's audio out jack.
Is this all possible? How should I go about to configure this? How should the AE's ethernet port be configured?
Any special modes the ADSL modem router or Airport Express should be in? ie bridge or client?
Thanks

On the ADSL modem router web-based interface, should I set any security setting? I think not as there'll be no wireless signal coming from it, only wired ethernet connections to both MacBook and AE. Security should only be set on the AE to prevent someone from accessing its WiFi signal. Is this assumption correct?
These are all correct!
How should I go about setting up security for this network?
First I would recommend that you configure the AirPort Express for WPA2 Personal. This will provide you with the greastest level of security while still providing excellent bandwidth performance.
You would configure wireless security for the Express by using the AirPort Utility on a Mac, PC, or iOS device. Using your MacBook Pro as an example, you would do so as follows:
Run the AirPort Utility.
Select the Express, and then, click on Edit.
Select the Wireless tab to enable it.
Set the Wireless Security option to: WPA2 Personal
Enter the desired password in both the Wireless Password & Verify Password fields. Note: Use of a "strong" password is encourage here. By strong, I mean use a mix of upper/lowercase letters, numbers, & punctuation marks. Try not to use common dictionary words. If you operate your wireless in an area where security is of an utmost concern, I would further suggest that you change the wireless security password every 60-90 days. Also don't forget to change the default AirPort Base Station Administrator password as well.
Click on Update and allow the Express to restart.

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

How do airport extreme and airport express routers connect to modems?

I've heard that airport extreme and airport express are wifi routers, not modems. if they are routers, they need to connect to my modem. Do they connect using a wire or wirelessly?

It must be connected to your modem with an Ethernet cable.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

Hi BillCilla,
If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
Apple Support: AirTunes audio stream drops or cuts out
http://support.apple.com/kb/ta21538
Regards,
- Brenden

Help ! - Connection between airport extreme and airport express

I have a home network with an iBook connecting wirelessly to an aiport extreme base station and an iMac connecting through an Airport Express, which has been configured as a relay to the base station (extending its range). The iMac is on the fourth/attic floor of my house; the iBook on the main floor.
The iMac has a printer attached to it; the iBook does not.
I have only intermittently been able to "see" the printer from my iBook and to print to it. Simiarly, i have only been intermittently been able to pull files from the iMac on to the iBook. I have no trouble connecting to the internet with either machine.
Why does the network keep dropping the airport-express-connected imac (and printer)? what can i do? help!

Sounds like an interferance problem to me. Do you have a cordless phone? You can try changing the channel on the AEBS or enable internet robustness.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Apple TV Inference with Time Capsule and Airport express?

I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
R

Welcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results.

My WRT160Nv2 settings? and airport express connection

Similar Messages

Maybe you are looking for