The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.
The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.
Hi BillCilla,
If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
Apple Support: AirTunes audio stream drops or cuts out
http://support.apple.com/kb/ta21538
Regards,
- Brenden
Similar Messages
-
I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??
Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables. -
When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?
This could be problematic.
It will depend on what model of iMac you have.
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
Most of the iMac's have sometype of video output port on the back. You will problably need a converter.
The 'hollywood' industry has been making it more difficult to get video out over time to prevent copying.
Robert -
I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
Does anybody have suggestions as to why this is the case?Understanding Home Sharing - Support - Apple
Hope this helps. -
How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.
See Terence Devlin's thorough explanation here.
-
My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?
Can anybody help me on this issue? I have already tried to replace the batteries but since the computer won't get past the spinning wheel of death then the keyboard won't connect.Please follow Apple's advice in http://support.apple.com/kb/TS2570. If you need to get your hands on a wired USB keyboard, even a PC one will work fine.
Do not follow the previous poster's advice, that option is a "last chance" option. OS X is stable and in most cases a reinstall is never needed. Follow the directions in Apple's letter. -
I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?
Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
Barry -
When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.
Try here:
http://support.apple.com/kb/DL1524 -
I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?
Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand. -
i also click on detect displays and nothing happens.
You have the display set in Extended Desktop mode. In System Preferences>Display there should be an Arrangement tab when you have the TV hooked up to the MacBook and both screens working. Do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
-
I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?
Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks... -
How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2 -
The wife tried to do an update on her new IPhone 5c now it is frozen at an ITunes screen, the screen has a pic of a cable and phone connector pointing to an ITunes symbol with the word ITunes under it. when it tries to do a restore the computer comes up with an error 21.
What has she done.Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking." -
After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?
My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite. -
I would like to move my music files to an external drive that my iMac iTunes could access wirelessly and I'm wondering if it is possible to do so through connecting a drive to my Time Capsule.
This can be done....but if you move your iTunes Media folder to the drive that is connected to the Time Capsule, you might first want to think about how you will backup these important files.
Time Machine cannot backup the files back to the Time Capsule, so you will need to use a commercial backup application like Carbon Copy Cloner or SuperDuper to copy the files back to the Time Capsule drive.
As long as you plan to add a hard drive, you might want to consider an alternate plan:
Connect a hard drive directly to your Mac using USB or FireWire and move the iTunes Media Library there. Then, Time Machine will back up both your Mac and the hard drive, so you have original copies on one drive and backups on another.
Whatever you decide, be sure to follow the correct instructions to move the iTunes Media Folder. You cannot simply drag and drop.
http://support.apple.com/kb/HT1449 -
Can anyone help? My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.
First run Software Update to make sure your iMac is up-to-date.
Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
Maybe you are looking for
-
I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order histor
-
I am having problem with my Itunes 64-bit. The help button is not working. I also have an error message, that I am not connected to the website. I have good connection. My Home sharing error (-2146893032) and my network connection error (0X80090318).
-
MIRO referred to a PO is showing all position, even if completely invoiced
Hi gurus, when I execute MIRO referred to a PO, the system shows me all the position of the PO, even if they are already invoiced. The system doesn't let me elaborate them but my Client doesn't want to see them. If I click CTRL+F5 the open positions
-
Maintenance Optimizer Error "Value loss during allocation"
Hi Everybody, like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new? System is new installed. SOLMAN_SETUP is executed. BC Set for MOPZ are activeded. SMSY is arranged. MOPZ is aborti
-
Less voltag in J502/DIO sbRIO 9636 (NI LabVIEW RIO Evaluation Kit )
Hello, I bought the NI LabVIEW RIO Evaluation Kit (with sbRIO9636). I have problem with the sbRIO9636. The voltag in J502,DIO Pin 49 and 50 is less than 5V (just 1.7V). so VCC of the LabVIEW RIO Evaluation board with a digital encoder, LCD screen, fu