My YouCam has been misssing for a while and I received help here with a new link for installing it.
HP Pavillion G60T-200
windows 7 32 bit
Youcam was missing for a while... I'm sure I uninstalled it by mistake.
Got help here yesterday with a link to install YouCam, and I did download the set up
BUT
this is the error message I got
Hi
Please find the link given below for downloading the software.
http://hplaptopdrivers.com/hp-g60t-200-cto-notebook-pc-windows-7-32-bit-drivers/
Fixing Webcam Problems in Windows 7
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
I need to retrieve an email that has been deleted from my computer and iCloud, please help.
My mail preferences were set to delete on iCloud after 30 days. How can I get a copy of an email that has been deleted ? I have changed the settings to never now but that didn't bring any back. Thank you.
No, not unless you have the email somewhere else as well. It's kind of the same thing with my devices, I delete an iMessage but if I search it in search it pops up, but I can't access it.
-
I created an iapple id and it said it had to send me a verification email to verify my email adress. It said ....email sent please click on link. I did this several times and although it says email sent...i never get the email.
Apple ID security issues -
Account security issues almost always require you to speak directly to an Apple representative to securely establish your identity as the account holder. You can set it up so that Apple calls you, either immediately or at a time convenient to you.
1. Go to https://getsupport.apple.com/Issues.do
2. Choose Other Apple ID Topics and choose the appropriate topic for your issue
4. Follow the onscreen instructions -
My audio/sound has been erratic for a while and now I have no output Help!
My audio/sound has been erratic for a while, both output and input, sometimes one would worked but not the other and sometimes both would be none excitant.
System preference does not show what I have connected aka external speakers or headset and the sound output in menu is grayed plus the output on system preferences output as well, sound input looks ok now.
Had Tiger, so I upgraded to Leopard to see if that would helped, Output use to come back after a while, however now input works but output hasn't worked for days, I can hear sound when I am rebooting or starting the computer, but its gone right after.
Since the Mac its fame for their audio stability, no ones seem to know how to solve the problem, so I am kinda desperate.
I have tried the following; ran repair permissions, looked for fluff lol!....still cannot fix the glitch. Any new ideas please!!
Thanks in advance!Since the problem existed before installing Leopard, it is clearly a hardware problem. Updating a broken system does not fix it, in fact many times it makes it worse or at least harder to diagnose.
I suggest you repost in the appropriate hardware forum - in your case the G4-17 forum(s) here:
http://discussions.apple.com/forum.jspa?forumID=1022
and the general G4-17 forum here:
http://discussions.apple.com/category.jspa?categoryID=138 -
I have updated my 4S i phone with ios 8.1.2, while activating my iphone, i forgot my password. I am able to sign in my apple id in pc (manage my account) but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help.
my apple id is with extension @ gmail.com but for activation it is mentioned that it is linked with extension of @me.comHi ulhas1frombanihal,
Welcome to the Support Communities! Because your account has been disabled, you will need to contact Apple ID account security to straighten this out.
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT5699
I hope this information helps ....
- Judy -
Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
there has been an error occurred while connecting to Apple's online store try againBest I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
there has been an error occurred while connecting to Apple's online store try again -
My iphone5c shut off while in use and has been off for 2 hours but is still hot
My iphone 5c shu off while in use and has been off for 2 hours and is still hot
Hello there, Steve.
The following Knowledge Base article links to some very useful articles regarding temperature on your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
iPhone acceptable temperatures
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
Keeping the original iPhone within acceptable temperatures
If you find that moving it to a cooler location doesn't help resolve the issue then:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My power button has been broke for a while and now i cannot turn my phone on, any suggestions ?
my power button has been broke for a while and now i cannot turn my phone on, any suggestions ?
If the battery was completely dead it may take some time to get it going.
Leave it pluggen into a wall jack for about 15 minutes then check back.
If not, you will need to make a Genius Bar appointment or contact Apple for a repair. -
My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!
Did you empty the Trash?
What size hard drive & how much free space. You should always have a minimum of 10-15% or more free space?
Cheers, Tom -
Eprint center has been down for hours! can't print while it is down! how can i get around this?
eprint center has been down for hours!!! i can not print while it is down!! how can i get around this??
It's back now but I agree about the status
-
I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes. I got a message stating that there was a problem with some of the files associated with the application. A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours. The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?" I keep hitting "no," but am staring to wonder if there is a problem with the install. Should it take this long if I have roughly 134 gigs of music? I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\. Any thoughts?
It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.
-
How can I delay my MBP from hibernating until the lid has been closed for a set period of time?
After extensive research, I have been unable to solve this problem and I'm hoping someone can explain this to me. Everytime I close the lid on my 13-inch, Early 2011 Macbook Pro, it immediately starts to write to disk (solid light on the front) for several seconds until it finally goes into Hibernate mode (flashing light on the front). The problem is, I frequently close the lid, then immediately reopen it within 15-30 seconds to resume typing or to add something I may have forgotten. Each time I reopen the lid before the light has started flashing, the MBP wakes for a moment, and allows me to resume typing. However, the Hibernation process has already begun and within 30 seconds, the screen goes blank. I have to wake it AGAIN, which is very annoying.
Based on my research, I could use pmset to change the hibernatemode to 0 (it is currently set at 3). However, I dont wish to disable hibernate mode completely; I DO want it to save a hibernation image to disk if it happens to run out of battery, so that when I resume I havent lost anything.
I then researched using standby and standbydelay to attempt a delay of the write to disk when going into standby mode. According to the pmset manual:
standby causes kernel power management to automatically hibernate a machine after it has slept for a
specified time period. This saves power while asleep
standbydelay specifies the delay, in seconds, before writing the hibernation image to disk and powering
off memory for Standby
I then set these values as below, expecting the laptop to wait 4200 seconds (70 minutes) before trying to write to disk when I close the lid:
standbydelay 4200
standby 1
Unfortunately, that did not work either. If I close the lid, the light glows solid immediately (indicating it is writing to disk), and if I try to reopen the lid before it is done, it will wake and seem fine, then 30 seconds later it goes blank right in the middle of me typing something. I usually have to click the mouse several times, or even the power button to re-wake it.
I do have InsomniaX installed, for when I want to close the lid and keep the machine awake permanently (while watching videos on airplay) and I have tried quitting that application to test this. However, when I close/reopen the lid..the result is the same. I cant keep InsomniaX enabled all the time, because it will never go to sleep when I truly want it to. If I am not using InsomniaX, I just want to delay hibernation until he lid has been closed for a set period (say 15 minutes or more). If I have not reopened the lid within that time, I want it to write to disk and go into hibernation mode. And if the battery runs all the way out, I want it to go into hibernation mode before shutting down so I can recover.
I would appreciate any help in solving this problem. Also any insight as to why the standbydelay setting above did not work. Thanks!Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.
-
This Apple ID has been disabled for security reasons
When I try to log in to my iTunes store account i get the following message:
*This Apple ID has been disabled for security reasons*
I've waited a while and tried again (as in a week or longer), and the account is still disabled.
Can anyone tell me how to get the ID enabled again, since as of now I'm unable to buy / download any content from the store. Which makes my iPhone a sad phone
My assumption is the problem is i have a rather desirable account name: i am constantly receiving notifications of failed logins to my account, presumably by scripts trying to hack it. But i have a secure password, so no problem. But perhaps this has led to the account being deactivated?
Any help / or reactivating the account would be great.Contact customer support: http://www.apple.com/support/itunes/contact.html?form=account&topic=iTunes%20Sto re%20Account%20and%20Billing&subtopic=Billing%20Inquiries
-
"This Apple ID has been disabled for security reasons" Every few weeks
I have had an iTunes account for years with no issue. Lately, I have been receiving the dreaded "This Apple ID has been disabled for security reasons" message every few weeks on my iPad 2(currenly, my only iOS device). I go through the process of reauthorizing my password and info and it works again for a while, then happens again some time later. It's getting annoying. I'm not sure what's changed. Only two computers are authorized to use my account and I am the only one who can log into either of them. No one knows my info and I live alone.
The only thing I can think is that it's a bot spamming my e-mail address and passwords in an attempt to hack my account. If that's the case, am I really going to have to go through this every few weeks just to use my iPad? Don't get me started on how stupid it is to have to type in your password to update existing apps. And that's usually when I find out, not when I actually purchase one.
Is anyone else having this issue? I'm wondering if it's more widespread. Some time ago, a chinese app was mysteriously purchased on my account. Apple refunded the purchase and reset my password. That was about the time that all of this started. The reviews on the app left no doubt that it was happening to numerous people and I have no idea how they would have forced a purchase on so many user accounts.Domin Harvey wrote:
PLEEEEEEEASE, please, please fix this!!
Everyone should keep a few things in mind:
This is an occasional problem affecting a vanishingly small percentage of the installed base. Look at the numbers of actual instances in just this thread, look at the gaps in time, etc.
Many many more ... me for example ... have never seen it at all. That doesn't mean it's not an irritation for those afflicted, but it does mean that it's not something likely to be seen as a critical issue affecting the whole base.
You aren't talking to Apple here in these user-to-user forums, at all, for any reason. This sort of communication is handled through their established Feedback links. If you can suggest a better way for them to handle things then make your thoughts and feelings known at —
http://www.apple.com/feedback/ipad.html -
My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.
Hi Lauren,
When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.
Maybe you are looking for
-
Firefox crashed and now won't open - it freezes and I have to keep force quitting it.
I have uninstalled and re installed firefox on my macbook. I have restarted my computer. It started crashing when a friend asked me to video chat on facebook. I tried three times and firfox wouldn't comply so I went to safari. when I came back to fir
-
'''YAHOO''' http://www.yahoo.com I don't need the YAHOO. I find it so completely annoying that you have forced me to look at TITLE tags when I am trying to find the URL I want. This ought to be a setting that I could control. Is there a hack into my
-
I am currently having issues with the audio for shows and movies being out of sync while playing only through ITunes. I have Windows 7 and am using the Asus P6T motherboard's Realtek audio. I don't have any issues playing through windows video play
-
Hi, i wanted to populate these 3 columns from the given table but how to create such a condition in table level SELECT 'Press' AS Location, ROUND(CONVERT(DECIMAL(8,2), DATEDIFF(mi,'[Param.1]', '[Param.2]')/60.0),0) AS ScheduledPressHours, CONVERT(DEC
-
How to make Profit Center Mandatory
Dear Sir, We are using New GL functionality in ECC-6 . During Document Splitting we desire that Profit Center must be mandatory , so that no entry is posted in "Non Assigned Profit Center" Kindly guide us as how can we make Profit Center mandatory .