MySQL Connection
Hello All,
This is probably an easy fix; however, I seem to be having difficulties. I am trying to create a connection to a MySQL database. I have added the mysql_2_comp.jar to the JDeveloper library for the current project and I have the following parameters in the actual connection:
Select a JDBC Driver: Other JDBC
Class Name: org.gjt.mm.mysql.Driver
Datasource URL: jdbc:mysql://192.168.0.1:3306/mysql
When I test the connection is gives the following error:
Unable to find driver: org.gjt.mm.mysql.Driver
Any help would be greatly appreciated.
Thanks,
Justin
null
Thanks Cozyroc,
Few things, I didnt understood.
1. Difference between the below two connecting string
Driver=[MySQL ODBC 5.2 Unicode Driver]
Driver=[MySQL ANSI 5.2 Driver]
2. Why the output of the ADO.Net is adding additional length to the source columns pulled from MySql e.g. Client_id is 5 out put is of length 7 similarly all 100 length columns are
output as 150, 10 as 15 which is not allowing to push this data to target table. col definition in source MySql and target SQL Server are same still why this is happening
3. Am I using the correct Connector/ODBC 5.2, as there are many available from 3.5 till 5.13 versions of it, I installed the latest
one.
4. Can you provide me an e.g. how I can use Derived Column to change the width ( any hint also will help I can modify accordingly)
Thanks for your patience to read and respond to this question :)
Neil
Similar Messages
-
PHP and MySQL Connection problem
I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
> -
Getting an error in JDBC mySQL Connection
Hi,
I am creating JDBC mySQL Connection error.
The eror messsage is
Incorrect name parameter jdbc:mysql://10.114.16.70:3306/kaushikb root,pass in naming operation.where root is the username and pass is the password and kaushikb is the database name.
I am entering the tablename as: emptable.
Regards
Taton
Edited by: Taton on Dec 11, 2008 3:15 PMLet me guess: you did
getConnection("jdbc:mysql://10.114.16.70:3306/kaushikb root,pass");rather than
getConnection("jdbc:mysql://10.114.16.70:3306/kaushikb", "root", "pass"); -
NEED HELP! can't create mysql connection in DW MX 2004
I re-format my computer last week and after reformatting i
install my PHP Triad and Dreamweaver MX 2004, but i can't create
mysql connection using DW wizard, i already follow the step:
1. create / manage site
2. choose document type
3. set up testing server ( i use php mysql @ localhost)
and when i create new connection (fill the hostname,
username, password, and select databases) it failed and show
message "unidentified error occur".
it never happen before (before i re format my computer).
can anyone help me how to solve this problem.
sorry for my bad english i came from Indonesia,
thx before
rgrds
zhastroI re-format my computer last week and after reformatting i
install my PHP Triad and Dreamweaver MX 2004, but i can't create
mysql connection using DW wizard, i already follow the step:
1. create / manage site
2. choose document type
3. set up testing server ( i use php mysql @ localhost)
and when i create new connection (fill the hostname,
username, password, and select databases) it failed and show
message "unidentified error occur".
it never happen before (before i re format my computer).
can anyone help me how to solve this problem.
sorry for my bad english i came from Indonesia,
thx before
rgrds
zhastro -
Hello,
I am trying to create a mysql connection pool using the admin console. The mysql JDBC driver is located in <install_dir>/domains/domain1/lib/ext.
For Datasource Classname I use com.mysql.jdbc.jdbc2.optional.MysqlDataSource
A ping results in:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection could not be allocated because: null, message from server: "Host 'localhost.localdomain' is not allowed to connect to this MySQL server"
When changing the URL property to localhost a ping results in:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection object cannot be null
Any ideas about what goes wrong?
Thanks...I did a simple php test:
<?php
mysql_connect("localhost.localdomain", "user", "pass") or die(mysql_error());
echo "Connected to MySQL<br />";
?>
This results in:
Warning: mysql_connect(): Host 'localhost.localdomain' is not allowed to connect to this MySQL server in /var/www/mathesis/mambo/mysql.php on line 2
Host 'localhost.localdomain' is not allowed to connect to this MySQL server
<?php
mysql_connect("localhost", "user", "pass") or die(mysql_error());
echo "Connected to MySQL<br />";
?>
results in: Connected to MySQL
So I see two possible solutions:
1) Make the appserver use localhost instead of localhost.localdomain (specifying localhost as property doesn't work!).
2) Make MySQL accept localhost.localdomain connections.
For both possible solutions I'm searching for answers...
-Michael -
No Tables in DW CS3 Remote MySQL Connection
Hello All,
I was hoping forum members would be able to troubleshoot a
Dreamweaver CS3/remote MySQL Connection issue I'm having.
I am successful in connecting to the database but the table
data I created in phpMyAdmin 2.6.3 does not appear in the
Application/Databases menu in DW. Instead of the name of the table,
I get "none".
Since I am new to databases, any help is greatly appreciated.
I did view older posts before submitting this one but the advice
recommended (re-installing the entire MySQL application from
scratch) is not an option. Server is SunOS running PHP 4.4.7 and
MySQL 2.0.20. I'm on Windows XP. Thanks once again.Was this issue resolved?
I have the same problem now. DW was working fine the one day and the next when I started it it had this connection problem.
I am testing on my local PC. My sites is at http://localhost/
All my connection are working because if I go to http://localhost/index.php I can see my site and if I go to http://localhost/register.php I can even register a new user. It will include the new user details in the data base and everything is working fine. So there is nothing wrong with the connection.
In DW I do have http://localhost/ on the Local Info screen. As I said, all was working fine on the current setup the one day and the next day it did not want to work.
Seems like a very common problem.
I want to buy CS4 and surely hope that the problem has been fixed by now. -
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard error Http error 403 or 500 internal server error. I am using ubuntu mysql.
a manual php script work fine
<?php
// open connection to mysql server
$dbc = mysql_connect('localhost','root','password');
if (!$dbc) {
die('Not Connected' . mysql_error ());
//select database
$db_selected = mysql_select_db ("msinventory",$dbc);
if (!$db_selected)
die('Cannot Connect' . mysql_error());
echo "TEST DONE1";
?>
but the database connection wizard fails with http error 403 or 500
i also use the HeidiSQL client and it works, the only problem is in dreamweaver.OK. Did you really mean to ask this question on a ColdFusion forum, if it's DreamWeaver you're having problems with? You're probably better off raising this on a DreamWeaver forum. "Using the correct tool for the job" 'n'all.
Adam -
MySQL connectivity Problem URGENT plz
Hi
plz can any one help me... its urgent
i need java to connect to MySQL database.with mm.mysql.Driver
the following sample code is just copied from the site and made changes in hostname, dbname and username.
classpath has been given correctly for the mm.mysql.Driver package (mysql.jar).
Thanx in advance....
Result
compilation --> success
while executing i get the following Error.
java.sql.SQLException: General Error: null
at org.git.mm.mysql.connection.<init>(Connection.java)
at org.git.mm.mysql.Driver.connect(Driver.java)
at java.sql.DriverManager.getConnection(DriverManager.java: 515)
at java.sql.DriverManager.getConnection(DriverManager.java: 197)
at JDBCDemoCreate.getConnection(JDBCDemoCreate.java: 36)
at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 14)
java.lang.NullPointerException
at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 17)
at JDBCDemoCreate.main(JDBCDemoCreate.java: 47)
Here is the code. can any one try this !
// JDBCDemoCreate.java
1. import java.util.*;
2. import java.sql.*;
3.
4. public class JDBCDemoCreate {
5.
6. private static final String hostname = "hostname";
7. private static final String port = "3306";
8. private static final String database = "dbname";
9. private static final String username = "username";
10. private static final String password = "";
11.
12. public JDBCDemoCreate() {
13.
14. Connection c = getConnection();
15.
16. try {
17. Statement s = (Statement)c.createStatement();
18. s.executeUpdate("CREATE TABLE rich ( id int primary key, name char(25) )");
19. } catch ( Exception e ) {
20. e.printStackTrace();
21. }
22.
23. }
24.
25. private Connection getConnection() {
26 // Register the driver using Class.forName()
27. try {
28. Class.forName("org.gjt.mm.mysql.Driver").newInstance();
29. } catch ( Exception e ) {
30. e.printStackTrace();
31. }
32.
33. // ask the DriverManager for a connection to the database
34. Connection conn = null;
35. try {
36. conn = DriverManager.getConnection("jdbc:mysql://" + hostname +
37. ":"+ port +"/" + database +
38. "?user=" + username +
39. "&password=" + password );
40. } catch (Exception e) {
41. e.printStackTrace();
42. }
43. return conn;
44. }
45.
46. public static void main( String[] args ) {
47. new JDBCDemoCreate();
48. }
49.}Hi!
You can try with this code coz, i worked with this code only and then i can talk to the database.
Connection con;
Class.forName("org.gjt.mm.mysql.Driver";
con = DriverManager.getConnection("jdbc:mysql:///db?user=root&password=");
Try it out!
Queries regarding this is welcome. Either in this forum itself or u can contact in the mail, the id is
[email protected]
Regards,
dinesh -
Auto mySQL connectivity(Username and Password)
Hey guys!
Good Day!
I have something to ask if possible to java and mySQL connectivity.
I have project that connects to mysql but im using this:
"+con1 = DriverManager.getConnection("jdbc:mysql://localhost/POS_Database","root", "12345");+"
Now, how to auto config the mysql connection not setting the username and password in the project? It configure whatever the settings of mySQL (username and password).you will have to have the user name and password someware. If not in the code. You casn put them in a file and read it in the code.
Another thing that you can do is to make every user account of your software a valid user in the database. So when the user logs in to software users user name and the password is what you have to use to connect to database. But that will create a bit of a administrative overhead and also it will make it deficult to use connection pooling. -
What's wrong with this MySQL connection? "Could not create connection to database server"
I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF. -
MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?
We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem.
However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we receive the following error:
HTTP Error Code 405 Method Not Allowed
We have entered the following in the MySQL Connection box:
Name: <name of our connection>
Server: <IP address of our database>
Username: <our database username>
Password: <our database password>
Database:
When we click the "Select" option next to the Database field, that's when we receive the above mentioned error.
We noticed that there was a fix posted by Adobe at:
http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm
...but that link is long since dead, however it does seem to indicate that Adobe are/were aware of this issue.
Can anyone help? We're trying to move from Classic ASP / MSSQL to PHP / MySQL but have hit a barrier right from the off, which isn't very encouraging. Hope someone can ease our concerns with PHP and MySQL.
Much appreciated.
NJThank you SnakEyez02.
I had the Testing Server set to Local/Network but didn't have MySQL installed locally. Changed that setting to FTP and it picked up on the database correctly.
When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless. I guess this must just be a difference between it and MySQL.
Thanks for the advice. Much appreciated.
NJ -
Webservice using mysql connection
I have made a webservice which use a mysql connection ..........
but unfortunately it doesnt work do I need a special configuration?
my statement for connecting mysql is exactly this :
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
String url ="jdbc:mysql://shahghol-252d3b:3306/university?user=root&password=1";
con = DriverManager.getConnection(url);
st = con.createStatement();
st.executeQuery("UPDATE status SET status.status='graduated' WHERE status.studentId='"+ ID +"'" );
st.close();
con.close();
} catch (Exception ex) {
System.out.print("error");
can you help me??Please refer to
http://dev.mysql.com/tech-resources/articles/connection_pooling_with_connectorj.html -
I have been using Dreamweaver 8 for about a month (previously
mx2004). It is updated to 8,02.
I can't make a mysql connection as well as open help section.
The help section freezes then closes Dreamweaver
The mysql conn throws this error:
can't connect to local mysql server through
socket;/var/lig/mysql/mysql/sock'(2)
What has happened, this worked fine a few days ago?
Thanks for any help.
marjiecomarell wrote:
> The mysql conn throws this error:
> can't connect to local mysql server through
> socket;/var/lig/mysql/mysql/sock'(2)
> What has happened, this worked fine a few days ago?
If you're using a local testing environment, it sounds as
though the
MySQL server has stopped running on your Mac.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
New PHP/MySQL Connection extension doesn't show tables. What's the next step?
I'm creating Dreamweaver extensions to work with my CMS.
Since it is already connecting to the MySQL database I'd like
Dreamweaver to access the same connection without asking the
developer for the MySQL credentials again. I have created the HTML
form, the EDML for the connection script, and the JavaScript to
stitch it together, and I can successfully create connections. The
connection script looks good but when I try to expand the tables in
the database window it doesn't post a request to the server and it
just shows "None". I have a regular PHP MySQL connection on the
same site which works fine.
I feel like I'm missing a required next step which would tell
it how to enumerate tables. It would be ideal if I could plug into
the existing PHP MySQL code for this.
I would really appreciate any help and/or pointers!"zymsys" <[email protected]> wrote in
message
news:fiuho4$ao8$[email protected]..
> I'm creating Dreamweaver extensions to work with my CMS.
Since it is
> already
> connecting to the MySQL database I'd like Dreamweaver to
access the same
> connection without asking the developer for the MySQL
credentials again.
> I
> have created the HTML form, the EDML for the connection
script, and the
> JavaScript to stitch it together, and I can successfully
create
> connections.
> The connection script looks good but when I try to
expand the tables in
> the
> database window it doesn't post a request to the server
and it just shows
> "None". I have a regular PHP MySQL connection on the
same site which
> works
> fine.
> I feel like I'm missing a required next step which would
tell it how to
> enumerate tables. It would be ideal if I could plug into
the existing PHP
> MySQL code for this.
>
> I would really appreciate any help and/or pointers!
Are you using the Database access functions?
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd31.htm
MMDB.getTables()
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd42.htm
MMDB.getColumns()
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd34.htm
Or are your trying to create a new Connection Type for the
PHP_MySQL_ServerModel or a whole new servermodel alltogether? -
Running MySQL Connection for PHP on Dreamweaver8
Good Day:
I installed the MySQL 5.0 and PHP 5.0 to run on my Dreamweaver 8.
On the Application Panel -> Database tabs -> MySQL Connection: after i entered the connection name, user name and everything, it returns HTTP ERROR CODE 502 BAD GATEWAY.
btw, I'm running on localhost
May someone pls tell me what's wrong with it?
many thanks!Hi,
maybe your issue is related to what´s already been posted to the Dreamweaver Application Development forums:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=263&threadid =1293443&enterthread=y
Günter Schenk
Adobe Community Expert, Dreamweaver -
MySQL Error 2002 when attempting to make a MySQL Connection
I'm trying to make a MySQL Connection and I've got my Staging/Testing Server setup as FTP with the proper host, username and password for FTP, root directory set to '/' (without the quotation marks) and Web URL set to http://www.mysite.com/
Tested the FTP and it connects.
For mySQL connection in my bindings, I'm using:
Connection Name; connRecords
MySQL Server: localhost
Username and then my Password for my DB which obviously I won't list here.
I click Select Database and that's when I get the prompt:
MySQL Error: #2002
Can't connect to local MySQL Server through socket '/tmp/mysql.sock' (2)
What does that mean and how do I get this to work?ladobeugm wrote:
I click Select Database and that's when I get the prompt:
MySQL Error: #2002
Can't connect to local MySQL Server through socket '/tmp/mysql.sock' (2)
What does that mean and how do I get this to work?
On a Mac, connection to MySQL is done through a socket (mysql.sock). The fact that there's a (2) after mysql.sock indicates there's something wrong with the socket. Usually, you can clear the problem by powering down your computer and then restarting. Don't just do a restart. Make sure the computer switches off completely to clear the socket.
Maybe you are looking for
-
I get the following message in a dialogue: Some actions taken while the account XYZ was offline could not be completed online. ... Mail has undone actions on some messages ... Apple Mail To Do <blah blah> (I'd love to attach a screen shot but that do
-
Weblogic Portal 10.3.6 Implementing Fork
We are having a requirement of implementing multiple portlets running parallel to improve the performance. But, there are some inter-dependencies between 'some' of the portlets. We tried implementing FORK for the portlets in order to execute the port
-
Hi All, I have a pdf document created with cropping marks. How do I trim/crop to size as when I used the Marquee Zoom to zoom the Cropping tool is not visible. If I am cropping on page view, it will be too small to crop. Pls advise. TQ
-
"View Latest Instance" as Default in BOE XI 4.0
Dear all, I am using a BO BI Platform 4.0 to deploy Crystal Reports in my organization. These reports are scheduled daily, users are viewing these reports via the BI Launch Pad. Now I want to protect my users from the need to click first on the docum
-
Accessing remote front panel in projected VI
Hello I evaluate possiblities to provide user interfaces over a LAN. One option would be Remote Panels (Using web-browsers has been set aside). This is done with Labview 2011 professional PC1: Windows XP Professional with Kasperky IS; PC2: Windows 7