Mysql hang on login

Hopefully I've done my research on this one.
I've got the latest OMW - 9.2.0.1.2 with the mysql plugin with the same version number.
I've having a hang on connect to the mysql database as described here:
MySQL conversion: can't connect to mysql server
and here: MIgration Workbench hangs at login procedure to MySQL
My root password is 8 characters, and I've downloaded the mysql driver version 1.2a and put it in %ORA_HOME%\Omwb\drivers\ but still get the problem.
Is this connect problem still a known issue? What about the release notes referred to in the above posts - I imagine that the web sites have changed since then, because I can find no links.
Anyone got any ideas?
Thanks,
Alistair

Hi Alistair,
it appears that you have followed the correct procedure to avoid this problem. In addition, can you check that the machine you have the Migration Workbench installed on has access rights to your MySQL server. If your Migration Workbench machine does not have access then it can lead to this problem.
If the problem persists, could you send a description of the problem along with a copy of the error.log file, which can be found in your %OMWB_HOME%\Logs, to our support team at the following address please : [email protected]
I will raise the issue of the the link to the MySQL driver web-sites being changed. Thany you for pointing this out.
I hope this helps,
To

Similar Messages

Audigy 2: Windows XP hang at login after new drivers instal

Hi All,
I have found that after installing the latest version of the Audigy 2 drivers (<span class="Apple-style-span">SBAX_PCDRV_LB_2_8_000) on my Windows XP SP2, sound works just before you reboot after installation. After the installation reboot, and after you enter your password at the login screen, you hear the logon-sound, and after that XP freezes.
I have booted into Safe mode and disabled all startup items, and Windows then boots normally. However, when I try to narrow down the fault by selecti'vely re-enabling some of the Startup items, it then hangs again (no matter which ones I enable).
So far, the only successful startup config consists of only the CT startup items being enabled.
If I enable ANYTHING (even a single different item each time) else Windows hangs again.
The only solution is to select "Restore last good known configuration" before Windows boots up. Undoing the driver installation using System restore, does NOT help.
Anyone with any ideas?
Thanks?

UPDATE: Just updated to SP3 and guess what? Windows hangs at login as before, despite the fact that I was using the older, up to now fully working, drivers.
Solution? Simple! Throw the card in the bin, and enable the onboard soundcard. END of problems! These people at Creative are completely USELESS...Not wasting any more of my time on their crappy products (and programming).
++?
Hi there,
Thanks for the reply; I have already gone back to?<span class="Apple-style-span">SBAX_WBUP2_LB_2_09_006<span class="Apple-style-span">?which seems to be working OK.
The point is however that part of the new release does not work, and I am convinced that it is related to some 'helper' application and not the main driver itself.
Anyone else having similar trouble?
Thanks?
Message Edited by lordbyte on 08-02-2008 02:04 PM

Macbook pro stuck/hangs at login screen ??

Macbook pro stuck/hangs at login screen and no any controls while i restart last time..3 days before i found many solutions but no one is perfect like PRAM/SCM format command option+p+r and other many but no any perfect solution which can fixed my issue..please help me asap i am so much upset for that coz i am developer and there is many of the data , i also run windows on it win 7 so now i am running with that i have latest 2011 mac OSX 10.7.5 with Core i5 ,4GB, 320 GB so please help me to resolve this issue i am waiting thanks in advan
Regards,
Muneeb
Developer
<Email Edited by Host>

Macbook pro stuck/hangs at login screen and no any controls while i restart last time..3 days before i found many solutions but no one is perfect like PRAM/SCM format command option+p+r and other many but no any perfect solution which can fixed my issue..please help me asap i am so much upset for that coz i am developer and there is many of the data , i also run windows on it win 7 so now i am running with that i have latest 2011 mac OSX 10.7.5 with Core i5 ,4GB, 320 GB so please help me to resolve this issue i am waiting thanks in advan
Regards,
Muneeb
Developer
<Email Edited by Host>

Emac hangs at login, valid passwords no longer work

My daughter's emac, running 10.4.8, hangs at login during startup. Just the spinning disc. I started up from the original disc and used disk utility to repair disk and repair permissions. Starting up in Safe Boot mode i get as far as the password prompt but when the correct passwords are entered the screen image shimmies back and forth. I have reset the passwords using the startup disk and it continues to happen. I know that the passwords are reset becuse the new prompt shows up.
Any help would be appreciated.
AD

That question has come up before bout that Knowledge Base article; all of the tips and suggestions in that remain valid under 10.4 (I suspect the article was retitled when Tiger first came out, in anticipitation of a never-needed Tiger version of the same article).
Would you know if anyone had been playing around with keyboard inputs in System Preferences? That's a 'gotcha' where if someone is playing around with the settings and decides to set say Dvork keyboard as the input method, normal Roman keyboard keystrokes will be putting out the wrong characters. (That happened on one lab Mac once; after figuring out the problem, I used a Dvork keyboard map to translate the desired password into Dvork-equivalant keystrokes.)

Stuck in "loop" or "hang" after login

Running a MacBook Pro with 10.5.4 and Filevault on (company policy, so turning it off isn't an option). Sometimes after I start up the computer I will get to the logon screen enter my password and the computer will hang. The background doesn't change to my user backgrounds and I need to do a hard reset.
I've tried disk repair, permissions repair, running fsck -fy in single user mode, amongst other things. Some other suggestions, like deleting preferences files don't work because FileVault is enabled.
Thoughts on other things to try?

I just had this problem and couldn't find a solution online, so for the record (I'm presuming it's too late for you) here is what worked for me.
First the symptom: upon booting I could get to the login screen with no issues. I could login to accounts that didn't have filevault enabled, but not the account with it (it would hang after login, never changing to my desktop background).
First workaround: Logged in as root and manually opened the username.sparsebundle file (under Users/.username), using the FileVault password. At this point I could see that all the files were intact, and access them. Then I got a warning from Sophos Antivirus that a file needed to be moved to the infected folder and I had to enter a password for it. After that, login worked fine. But after the next logout I had the same problem.
Final workaround: Turning off Sophos (not just the moving of files but also active scanning) solved the problem. Best guess is that Sophos is trying to move files before login and doesn't have the permission to move them to the right place but you can't see that it's needing that feedback so it just stalls indefinitely.
I note that another user with this problem also had Sophos installed (see topic "Can't login after enabling FileVault"). I only had the problem after transferring a bunch of old email to my machine (with windows viruses in some of the attachments). Of course these caused my mac no threat, but this combined with the need for a password for file movement triggered the weird behavior.

MIgration Workbench hangs at login procedure to MySQL

I started Migration Workbench, access the oracle repository, started the wizard, enter the login information to connect to MySQL, but it hangs there without doing anything. I checked the password, and it works fine going through the the command prompt to access MySQL. There is no record of error logs, so i am not too sure what is wrong.
I suspect it is having problems accessing MySQL. Is there any configurations that is needs to be set up before i run the migration workbench?
I am very new to oracle, so i am not too sure what other configurations that i am required to set up.
Hope someone can help. Tks
Andrew

Hi Andrew,
Usual cause of issues are as follows:-
You need to download the correct version of the MySQL jdbc driver and install it into the correct location. Please see the release notes
Also, the password for connecting to MySQL should have 8 letters.
If you can't get it going then please contact [email protected] with %ORACLE_HOME%\Omwb\log\error.log
Regards
John

Very slow boot and hanging after login.

About 2 days ago I put my Mac to sleep by closing the lid. The next day, after waking it up and logging in, I opened Firefox. Then I got the beachbubble which lasted for awhile but then firefox opened. Then I closed Firefox because the beachbubble had me worried, but after closing it I got another beachbubble. I held the power button on my macbook because the whole OS seemed locked up.
Now whenever I boot, I stay at the apple logo screen for atleast 10 minutes, then when I finally reach login, whenever I click on something I get a beachbubble for awhile. If I do login, it seems to hang at the default wallpaper screen, but I can move my mouse.
I don't remember updating or installing anything that might cause problems like this, but I'd like to do a time machine restore back a couple days, however I can't get to my desktop.
Thanks in advance.
I did try resetting the PRAM and NVRAM, twice atleast, I tried Safe Boot, I tried Verbose and Single-User mode. With my experience I couldn't do much in either, however I did type"exit" in Single-User mode, and when "DSMOS has arrived.", nothing happened.
Oh, and I can't boot with only power without the battery, because I have a non-removeable battery, atleast, only Apple is supposed to touch it.

Restart the system from the SL disc you have. If you aren't sure how to do that put it into the DVD drive and restart the computer holding down the Option key, when it comes up choose the disc in the DVD drive. If it attempts to install let it until it gets to the choose language. Once you are on that screen then click the Utilities menu and choose Disk Utility. Once DU is running then choose the internal HD and look for the S.M.A.R.T status. If it says Verified that is a good sign, if it says anything else kiss the HD goodbye. I hope you have a good back up of your system because you will need to replace the internal HD. If the machine is still covered by warranty or AppleCare then contact Apple and arrange for a repair. If the S.M.A.R.T status says the internal HD is Verified then choose Repair Disk, you may have to run this numerous times for it to be repaired.

Is php or mysql hanging due to my code?

Hi,
I've a project where i need to display the result of a query in a table. One of the result is 1263 rows and even after 15 minutes the table doesn't display.Is php,mysql or apache hanging.I use latest softwares of the above.If yes, wht can i do to test it and rectify it. connection working fine.The code is below
$ifields=split(",",$query1);
$i=0;
$bgc="black";
echo "<center><font size=9 face=\"book antiqua\"><table cellspacing=1 border=3><tr bgcolor=000000><th>Sl #</th>";
echo "<th>StreamId</th>";
echo "<th>Directory Path</th>";
echo "<th>Name</th>";
echo "<th>For Details</th>";
foreach($ifields as $field)
     if ($field=="typeid")
     else
          if ($field=="streamname")
          else
          echo "<th>$field</th>";
while ($i<=$num-1)
     $type=mysql_result($result,$i,"streamid");
     $directory=mysql_result($result,$i,"directoryid");
     //$type=mysql_result($result,$i,"typeid");
     $streamname=mysql_result($result,$i,"streamname");
     $streampath=mysql_result($result,$i,"streampath");
     $querytype = "SELECT * from type where id=$type";
     $resulttype = mysql_query($querytype, $connection);
     $typename=mysql_result($resulttype,0,"name");
     //$dirname = "SELECT * from directory where id=$directory and typeid=$type";
     //$resulttype = mysql_query($dirname, $connection);
     //$directoryname=mysql_result($resulttype,0,"name");
     echo "<tr bgcolor=$bgc><td>$i</td>";
     echo "<td>$type</td>";
     echo "<td>$streampath</td>";
     echo "<td>$streamname</td>";
     echo "<td><a href=\"details.php?type=$type&directory=$streampath&name=$streamname\" target=main>Click Here </a></td>";
     foreach($ifields as $field)
          if ($field=="type" || $field=="streamname" )
          // Do Nothing.
          else
               $value=mysql_result($result,$i,$field);
               $Hex="";
               if ( $field=="pcrpid" || $field=="audiopid" || $field=="videopid" )
                    if ( hexdec($value) !=0 ) $Hex="0x";
               else if ( $field=="ac3bitrate" || $field=="samplerate" )
                    if ( $value="0.000000") $value="";
               echo "<td>$Hex$value</td>";
     $next=$i+1;
     if ($i%2==0)
          $bgc="gray";
     else
          $bgc="black";
     $i++;
echo"</table></font></center>";

Hi!!
Pls post complete code...also you haven't closed the <tr bgcolor=$bgc>..tag..make sure <tr> tag is closed..

Query MySQL table from login form.

Probably a simple question, but I can't seem to get it. Here my
my table on MySQL
ID        Username        UFN           ULN             Password
1         joSmith            John           Smith           encrypted
2         jaSmith            Jane           Smith           encrypted
3         jDoe                 John           Doe             encrypted
When I login using username and password, I want to display the first name and last name for the user and display it on the next page. I can usually echo a _POST, but when it comes to sessions, this doesn't seem to work properly, as the next page doesn't know the variable.

Sorry here is the code, its generated from the login user wizard from dreamweaver. It doesn't matter what code is on the second page as the session and post variables are "gone", I can't call on it. This code of course will successfully login to the restricted pages without issues.
<?php require_once('Connections/UserAcc_mySQL.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['username'])) {
$loginUsername=$_POST['username'];
$password=md5($_POST['password']);
$UN=$_POST['usern'];
$MM_fldUserAuthorization = "";
$MM_redirectLoginSuccess = "loginredirect.php";
$MM_redirectLoginFailed = "adminlogin.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_UserAcc_mySQL, $UserAcc_mySQL);
$LoginRS__query=sprintf("SELECT `User`, Password, UFN, ULN FROM username WHERE `User`=%s AND Password=%s",
    GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $UserAcc_mySQL) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
     $loginStrGroup = "";
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style>
.Login
position:absolute;
vertical-align:middle;
margin-left: 40%;
margin-right: 40%;
top: 153px;
</style>
</head>
<body>
<div class="Login">
<form ACTION="<?php echo $loginFormAction; ?>" method="POST" name="LogMeIn">
<label>Username:</label> <input type="text" name="username" id="username" /><br />
<label>Password: </label><input type="password" name="password" /><br />
<input type="hidden" name="user" />
    <input type="submit" value="Login" />
</form>
</div>
</body>
</html>

System Hang at Login

Hello all,
I am writing regarding a recent weird event that happened on a Solaris 10 with 7 local zones on it that I have no idea what happened. Maybe some of you experienced this kind of event before.
Trying to login trough ssh to the server, after login prompt would appear and password was typed correctly the login would just hang with no additional information ( if the password was typed wrong it would output the usual : "Login Incorrect" ). In the meantime, connected to the ILOM console and noticed that it was logging every login i was doing trough ssh ( all halted ). Trying to start the /SP/console it would also halt, eventually being left with the only option of restarting the server. After restart, everything presented itself ok, all services starting and no other problem arose.
The server is a Solaris 10 Generic_137111-08 sun4v sparc SUNW,SPARC-Enterprise-T5220.
Trying to debug this I couldn't find any relevant information in messages logs or any crash core dump.
Any idea on what might have happened? Thank you in advance.
Edited by: liviu.b on Sep 10, 2009 7:01 AM
Edited by: liviu.b on Sep 10, 2009 7:01 AM

Hello Andrew, thanks for your input.
Well, I tried looking at /var/adm/messages before and there were absolutely no entries for that day, except the request for Power-Off and the ones at boot-up process. But did found some weird input from the boot-up :
Sep 2 09:39:52 server genunix: [ID 198094 kern.warning] WARNING: Page83 data not standards compliant NETAPP LUN 0
.2:q
Sep 2 09:39:52 server scsi: [ID 243001 kern.warning] WARNING: /pci@0/pci@0/pci@8/pci@0/pci@a/SUNW,emlxs@0,1/fp@0,0 (fcp5):
Failed to create nodes for pwwn=500a098287297376; error=5
Sep 2 09:39:12 server luxadm[167]: [ID 250096 user.error] ID[luxadm.create_fabric_device.2316] configuration failed for line (/d
evices/pci@0/pci@0/pci@8/pci@0/pci@a/SUNW,emlxs@0,1/fp@0,0:fc::500a098287297376) in file: /etc/cfg/fp/fabric_WWN_map. I/O error
We could only link this with this Bug Report (11-Closed:Not Reproducible) : http://bugs.opensolaris.org/view_bug.do;jsessionid=f67c90cc881ef9c29c40600f6cc?bug_id=6228000 (couldn't use the insert link )
As you can see not using NAS(NFS), but SAN ( NetApp). But reading your point I think it makes perfect sense ( yes, the /usr/sbin/quota trap is there in /etc/profile ). The global zone of the system is using server-internal storage, but all the local zones are using external storage.
Edited by: liviu.b on Sep 11, 2009 12:21 AM

U410 hangs at login screen with no password box or username box

So I received some virus quarantines yesterday and removed then but then when through my program files and researched/removed suspicious folders mostly. Went to restart my computer and it now hangs at the login screen with just the Windows login screen background. On startup it runs a memory check and then asks if I want to start in safe mode. Both modes hang at the login screen. So I downloaded the recovery disk because I didn't do the one click backup. I connect my external drive and change the boot order, then restart and it doesn't take me to my external blu ray drive to boot my CD from. Any suggestions here? Highly appreciated.... I am not under warranty.

LenBlazer wrote:
A cd or usb flash drive will do. You have to go to bios and change the boot order. However, usually you don't see the cd/Dvd in the boot option so that is why I suggest using the flash drive. BTW, don't forget to disable secure boot when running the program.
@ the OP: did you disable secure boot?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Terminal hangs at login occasionally

Hi,
So this has now happened twice. When opening a new terminal window, or new tab, the terminal will just hang at the 'login' process. It will never actually present a prompt. Quitting terminal and restarting did no good. Also, perhaps related, I had to do a hard shutdown, as it hung during the restart process.

Have you made any recent changes to your shell's initialization scripts?
try cranking up the verbosity, typically by using something like: 'set -xv'
Which file to use depends on if you're using a login shell or not.
if login shell add it to one of these files:
~/.bash_profile, ~/.bash_login, or ~/.profile
if not a login shell add it to the ~/.bashrc file.
for example
$ head .profile
#!/bin/bash
set -xv
Then just start another Terminal.app session. Watch for where it hangs.

Macbook hangs during login - airport extreme issue?

My new macbook hangs during startup. I have an airport extreme 802.11n version base station. My macbook is configured to talk to this base station.
If I power down the airport extreme, login works just fine. If I power on the airport, login hangs.
Any suggestions on how to fix this?

Hi
It is connected through wireless. I have installed the 802.11n drivers on it as well, doesn't help.

Hangs on login

I am new at this. First full year with a completely OSX environment (9 is finally gone from out site). I am sure I have some setups that could be wrong, but it is working pretty well so far. We have 800 students and I see about 350-400 students a day through the lab. We have 42 education intel imacs and the rest are PPC emacs. They are all running updated 10.4.8 sys software.
For a few weeks I have been dealing with an occasional login where the name and password would dither and then hang there until we restarted. This may happen 10 times a day, but I figured with the amount of students that go through the lab that wasn't too bad. Well yesterday it got worse. Each period I would have 5-10 computers that on logon would go beyond the name and password, meaning that would disappear, then the computer would hang, with the blue desktop screen but nothing else. I waited a bit, but it seems the only resolve was to hold the power button and restart.
Any idea as to why this is happening now, and what I can do to fix it. Thanks so much for your expert advice in advance.

Has anybody got any further information on this issue?
I am experiencing the same problem, I have a network of roughly 80 clients about 12 of which are Intel iMacs and the rest are PPC eMacs. I am using an XServe and XServe RAID to serve up the home directories.
The issue started when I upgraded the network to 10.4.8, unfortunately this was a very similar time to when I added the first Intel Mac to the network so therefore I can not point my finger at the guilty party :0)
I was advised by another Mac fanatic that it could possibly be due to font cache corruption so to try and isolate the problem I rolled out a little app that I found on the net called NHR http://jochsner.dyndns.org/NHR/Welcome.html
What this basically does is stores all cache files for the network users on the client machine rather than in the Library/Caches folder in the users home directory. My assumption was that if font corruption was occurring then NHR would reduce it to set clients. Alas this is not the case! I reported the issue to Apple in early October and am still waiting for a resolve, good job I did not hold my breath! At the time I was told by the engineer that the issue is not a known 10.4.8 issue.
Any more info or help is greatly appreciated!

MacBook Pro hangs on login because of Time Machine.

I had this problem where after a restart my Mac would occassionally hang for 10-15 minutes at a time right after I logged in.
It was the oddest thing, it would boot up fine, and the user login screen worked fine. I could even log into my other accounts (Guest account, etc.) with no issue,
but when I tried logging into my main account it would load my background and just freeze.
Nothing would respond, the dock wouldn't move, spaces wouldn't switch, nothing was responsive.
The only sign that the computer was alive was the spinning pinwheel of doom.
This drove me nuts, I tried removing all my startup items from accounts, hunted down all LaunchAgents and startup scripts, and took turns deleteing them, and even reinstalled the OS but nothing fixed it.
When skimming over the logs I saw one of the last things my computer did when I logged in was startup Time Machine's Mobile Backup utility.
As a complete shot in the dark I disabled Time Machine and rebooted, and I was instantly able to login!
Dumbstruck I endabled and disabled Time Machine and sure enough every time I enabled it my computer froze on login.
WTH?
Has anyone else had a similar issue?
I don't do anything weird with Time Machine, I'm use a mobile Seagate Drive formatted to HFS+ that I've been using on Macs for a while.
It use to work fine on this Mac, but sometime after updating to Mavericks this glitch came up.
It's not that big of a deal since I can still manually queue backups to my drive it's just somewhat of an annoyance.
I understand that software bugs happen, but considering the shear number of them that have seem to have crept in OSX lately, well it's getting very sad.

Hi, and welcome to the forums.
That's rather odd.
I'd start by verifying the internal hard drive, and repairing the backups, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

Mysql hang on login

Similar Messages

Maybe you are looking for