N-up workaround not working

Having upgraded from iPhoto 07 to 09, I found myself without N-up. A quick search pointed me to workarounds described in threads such as http://discussions.apple.com/thread.jspa?threadID=1178557 and http://discussions.apple.com/thread.jspa?threadID=1885841 where people used the layout menu to print more than one page per sheet.
However, when I attempt this same thing I do not get borderless photos printed side-by-side. Instead, everything has a big white border on it. If there are two pictures on a single 4x6 sheet, each picture has a white border. Same with four pictures on a 4x6. I've made sure borderless paper is selected each time I've attempted to print. Is anyone else having this problem? No one in the other threads I mentioned seem to be experiencing this.
As another user who greatly misses n-up, I would very much appreciate any assistance in getting this workaround to work for me. And yes, I did make sure to leave Apple some feedback asking to add N-up back in

Sorry, my bad, yes it was iPhoto '06 that I upgraded from.
Looking back on the two threads I mentioned, I don't see anyone actually saying that the pictures were without a white border. The whole point was to find an option that didn't have "wasted space" (the contact sheet option), which is where I made this assumption.
Still, it should not print with a white border since it is printing two borderless images on one borderless page. I understand that this is just the way it is, but from a desktop publishing standpoint it's an oversight.
This means that there still isn't a real work around for printing n-up.
I was able to get iPhoto to produce something similar, but it has a lot of steps and isn't very easy at all. (I was hoping to find a solution that I could easily explain to my mother..):
Use the postcard creator (which uses a 4x6 format) and select the Photo Collage theme. Do your stuff, preview as PDF, and then only print the first page.
Does anyone know of any possible alternatives? Is there a way to modify the Post Card templates to not have the second page, and to print from iPhoto, perhaps?

Similar Messages

  • Epiphany + gwget not working... possible workaround not working too

    hi guys!
    Usually I download files of considerable size, and for this I use gwget, starting it manually and adding the download also manually... despite also I use epiphany and I have the gwget extension activated... but there is no way epiphany communicate with gwget...
    googling, I found a workaround used in debian... they found the extension was not working because a mistake in the dbus file service:
    /usr/share/dbus-1/services/org.gnome.gwget.service contains:
    [D-BUS Service]
    Name=org.gnome.gwget
    Exec=/usr/bin/gwget
    but according to the source file epi-gwget-extension.c that contains:
    remote_object = dbus_g_proxy_new_for_name (connection,
    "org.gnome.gwget.ApplicationService",
    "/org/gnome/gwget/Gwget",
    "org.gnome.gwget.Application");
    the dbus service should contain, for example:
    [D-BUS Service]
    Name=org.gnome.gwget.ApplicationService
    Exec=/usr/bin/gwget
    I did this, restarted dbus (the whole system, actually...) but nothing changed...
    any of you can help me? what i'm missing?
    thank you for your time

    jorchube wrote:well... not 100% sure, but yes, it's supposed to work, since the extension is fixed for being detected by epiphany 2.28, and Vincent Untz commited a patch specific for this issue with webkit two months before the release of the las version of gwget : http://mail.gnome.org/archives/svn-comm … 04337.html
    The patch has nothing to do with webkit. I suggest you contact the developers. You can probably catch them on irc.

  • 2k classpath limitation workaround not working

    Hello
    I am aware of the 2k limitation in installing weblogic as win2k service. The suggested
    workaround for that as per the documentation is to provide a '@filename' paramater.
    But looks like it is not picking up the ''myclasspath.txt' This file is in the
    %WL_HOME%/server/bin directory.

    Using Photoshop CS2, I created a document that is 217 pixels wide, 350 pixels high, 8 bit RGB, with exactly 217 layers.
    I can navigate up and down with one layer visible using Alt ] and Alt [, no problem.
    In this case, Photoshop is set to use 100% of available memory on a 64 bit system, which means it gets 2786 MB:
    Anything else you'd like me to try?
    -Noel

  • HT5559 The Java 6 downgrade workaround not working anymore?

    I have Mountain Lion installed. I followed the above article a couple of weeks back, and successfully downgraded from 7 to 6 (I needed it as I use Google Chrome - don't tell me I should use Safari, I know Java 7 works there but that's not the point).
    Today I tried my javaapplet (online banking) and only saw a grey window, not even a "pluging missing" or anything. When I visit http://javatester.org/version.html I can see nothing. I tried the above article again, still nothing (note: I do restart Chrome every time and have no other browsers open).
    Seems I'll have to upgrade to 7 and use Safari instead...? Do you guys experience the same? Does anyone happen to have a solution?
    Thanks a lot in advance.

    benomatis wrote:
    I have Mountain Lion installed. I followed the above article a couple of weeks back, and successfully downgraded from 7 to 6
    Java 6 has been disabled by Apple for almost a week now and they have not announced any plans to update it for Lion / Mountain Lion users. A lot of users have complained, but only time will tell if they will react to that.

  • Drag n Drop selected Text from Safari, chrome not working on indesign CC

    In CS6 If we drag drop any selected text from any app on layout it work but in indesign cc it is working only with some app like TextEdit, notes etc. I knew that very few people have such use case but same is also not working from one of my cocoa app.
    while  debugging if i drop content from TextEdit and Notes app on some sample app I found that TextEdit & Notes App registered for this Extra Pasteboard type "com.adobe.indesign-import-ustl" and "com.adobe.indesign-import-styl" where as chrome and safari are not. similarly my app is registered only for "NSPasteboardTypeString" type. Is this is the limitation or bug of indesign?

    Similar bug(#3710667) was exist in CC before 9.2.2 update as you can see in release notes of 9.2.2(CC last update) here. before fix simple selected text drag & drop did not work from any application except TextEdit .I have also spent hours before this update to find out bug I used ClipBoardViewer sample App to find out current Drop flavour and its content it may help you and before fix I find some workAround first is add flavour in your drop which Indesign understand even if you are not adding any data for that flavour so that you start receiving couldAcceptType() and under this call parse your actual data from PasteBoard and remove all data from pasteBoard so that another next helper will not consume it. as you mention even after adding text flavour your couldAcceptType() not hit so may be this WorkAround not work for you but it worked for me.
    second is just a finding  i.e before doing drag and drop on indesign create one new document (from Indesign UI not programmatically ) save it on disk close it and reopen it after it every drag & drop will start working work .

  • IMessage is not working in IOS 7 , Any workaround

    iMessage is not working in IOS 7 , Any workaround

    Yap, sad but true...
    The most annoying problem, besides iMessage, is the keyboard, it's horrible on my iPhone 4 in Safari. Some on some formulars the keyboard is so **** slow that I had to stop typing after 2nd word.
    But I could fix the iMessage Problem, first turn off iMsg, then you have to backup your Phone on your PC/Mac in iTunes, turn off auto sync when done and pull the phone off. Then go to the Phone settings and reset everything, then choose "set up as new device".
    When done go to settings and activate iMsg and wait for activation, it will work! After you're done plug the phone back to your PC/Mac and restore from the Backup you made before. Now go to phone settings again and check if iMsg is on, if not (as it was in my case), turn it on and activate again, it will work now!!!
    Attention: Apps and Music have to be resynced or downloaded after this, they are NOT part of the Backup.
    This was what Apple tech. support told me to do and it worked fine.
    Greets

  • CMSS3D is not working !!!! after modding teh shell32.dll PLEASE HELP

    ? hello there,
    i have a question...why does cmss3d uses the shell32.dll in system32?
    cause i wanted to edit my shell32 to have a new icons, etc...
    so, when i change the shell32, even i change onnly one icon, the cmss3d is not working anymore...
    as sonest i change the shell32 back to its original, even without restart, the cmss3d is working again like it should!!
    so how can i fix this...what is creative even doing with this file?
    PLEASE HELP me, i need to do some modification to shell32.dll...
    but i also need cmss3d to work...can maybe someone can tell me what the cmss3d is loking for in the shell32.dll so i can make a workaround or something...cause this is related to all creative x-fi users..!!
    greetz, BGViruS

    H? ha, lets say it like that..
    i talked with people from MS..and they said it shouldnt happen..
    Creative is the only soundcard maker that has a prob with that...
    if you guys would make your software better than betas it wouldnt happen..
    anyway i asked you guys something that still no one answered..
    question: for what reason does the cmss3d modul uses the shell32 ?
    thats what i wanted to know so i can change it.
    no other software like from realtek and so on hass no prob with that..and chancing a pic in the shell32 isnt coruppting system files, ask MS for yourself...
    so, please answer my question, why is cmss3d using the shell32 and in what way...
    thats all i want to know. after that you can close this threat...
    if you are really a serious manufacter then help me insted of talking bull**bleep**
    greetz

  • SSO to R3 not working after system copy

    Hi Experts,
    Recently our QA R3 client XXX was deleted and the whole system was rebuild using system copy of client ZZZ of R3 production. Now we had to reconfigure the SSO between portal and QA R3 with the new client.
    But it is not working. It was found that the QA R3's own self signed certificate shows CN=ERP (same as R3 Prod) and not ERU as it should have been. We changed the CN value to ERP,in Visual Admin (Services ->key storage , Ticket ). Still the result is same.
    How to re-generate the self signed certificate in R3 with CN=ERU ?
    or a workaround for this problem.
    Regards
    Jimmy

    HI Jayendra 
    Recreate the saplogonticketkeypair following the procedure outlined here
    http://help.sap.com/saphelp_nw70/helpdata/en/75/c80b424c6cc717e10000000a155106/content.htm
    Then you can export the SAPLogonticketkeypair-cert (public key certificate) of the Java AS and import it into the target ABAP system
    Important: the following two steps must be done in the ABAP client that will receive the logon tickets i.e the ABAP client that the component/application on the Java AS is configured to connect to e.g the client specified in the portal iview properties or the client specified in a Web Dynpro JCo Destination
    (1) Import the public-key certificate of the Java AS into the ABAP systems certificate list using transaction STRUSTSSO2
    (2) Add the certificate to access control list
    When adding the certificate to the ACL the SID should be set to the SID of the ticket issuing Java AS and the client should be set to the client that the Java AS is writing to the logon tickets i.e the value of login.ticket_client in the Java AS
    Remember, in an Add-In installation, where the system IDs are the same, you must change the default client for the J2EE Engine (000) to a client that does not exist on the SAP Web AS ABAP system e.g change login.ticket_client to 999
    See: http://help.sap.com/saphelp_nw70/helpdata/en/cb/ac3d41a5a9ef23e10000000a155106/content.htm
    The reason for this change is that the system ID and client combination must be unique when tickets are to be accepted by an SAP Web AS ABAP system
    By the way it is better to start a new thread with your question rather than bumping a thread that was already set to 'answered'

  • Application not working in IE 11

    Hi all,
    application built on 11.1.1.6
    I am working on application which of custom task flow and used in webcenter spaces application.
    Its not working in IE 11.Getting an popup message that it is not supported version.I try to follow  Jonas de Graaff weblog: How to run your ADF 11.1.x application under IE 11: a workaround
    this approach..But still not working.am i doing wrong anywhere?
    Please suggest. Should i raise an SR? What you suggest?

    Timo Hahn Yes, that's the last option i have.I tried this workaround.I am able to see first page(Login page) but buttons are not working.no navigation happening...

  • Application Diagnostics not working

    Hi,
    In our clone instance "Application Diagnostics" is not working. When I click on Application Diagnostics>Diagnose, then the page is coming but the tests are not visible. It was working fine couple of days ago.
    Earlier an apps DBA ran a concurrent request and bounced the application, but he doesn't remember it now.
    Kindly tell me the concurrent request to resolve the problem or please tell me if there are any workaround.
    ERP version: 12.1.2
    Database: 11.2.0.1
    Os: AIX 6.1
    Regards
    Garv

    Can you find any errors in Apache log files?
    Please bounce the application services and check then.
    Also, make sure you have no errors in the database log file.
    Please also review these docs.
    E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12 [ID 235307.1]
    E-Business Suite Diagnostics Installation Guide [ID 167000.1]
    Thanks,
    Hussein

  • SSRS CatalogItem method not working for deploying a shared data source

    I have been working with the SSRS CreateCatalogItem method to deploy reports to a SSRS 2012 in SharePoint integrated mode with SharePoint Server Enterprise 2013. I am using Powershell. The CreateCatalogItem method works fine when I deploy RDL files,
    but fails when I deploy an RDS. I get an rsInvalidXML1400 error, whatever that is. Here is a cut-down version of my code to establish the bare essentials:
        [String] $reportserver = "server20";
        [String] $url = "http://$($reportserver)/sites/AdventureWorks/_vti_bin/reportserver/reportservice2010.asmx?WSDL";
        [String] $SPFolderPath = "http://server20/sites/AdventureWorks/BICenter/Data%20Connections/";
        [String] $fileFolder = "C:\SiteBackups\BIReports\BIReports\";
        [String] $itemName = "AdventureWorksCube.rds";
        $ssrs = New-WebServiceProxy -uri $url -UseDefaultCredential;       
        $warnings = $null; 
        $itemPath= $($fileFolder + $itemName);
        $definition = get-content $itemPath -encoding byte;      
        try
            $ssrs.CreateCatalogItem("DataSource", $itemName, $SPFolderPath,$False,$definition,$null, [ref] $warnings);
        catch [System.Web.Services.Protocols.SoapException]
            $msg = $_.Exception.Detail.InnerText;
            Write-Error $msg;
    I have a workaround whereby I read the XML of the data source file directly and extract the ConnectString and Extension elements then use the text within them to create the data source using the DataSourceDefinition class. My point is not to get a workaround.
    I want to establish that the CreateCatalogItem method indeed does not work when used with the ItemType "DataSource". In the code above, if I change the itemType i.e. first parameter of CreateCatalogItem to "Report" and change the $itemName
    to the name of an RDL file, it deploys correctly. Has anyone else encountered this behavior or am I doing something wrong here?
    Charles Kangai, MCT
    author of the following Microsoft Business Intelligence courses:
    http://www.learningtree.co.uk/courses/139/sql-server-analysis-services-for-business-intelligence/
    http://www.learningtree.co.uk/courses/134/sql-server-integration-services-for-business-intelligence/
    http://www.learningtree.co.uk/courses/140/sql-server-reporting-services/
    http://www.learningtree.co.uk/courses/146/sharepoint-business-intelligence/
    Charles Kangai, MCT

    Hello,
    We can invoke the SSRS proxy endpoint (ReportService2006.asmx)from PowerShell to publish report definitions (.rdl) and report models (.smdl) to a SharePoint library, but this does not apply to data source (.rds) files.
    In order to deploy .rds to SharePoint library without using SSDT, you should convert the .rds file to its .rsds counterpart which is pretty contains same content but in different schema.
    If you want to fully automate your deployment, you should write your own converter and perform the deployment by utilizing SharePoint feature framework and SSRS proxy endpoint (ReportService2006.asmx).
    Please refer to the following blog about this issue:
    PowerShell:Deploying SSRS Reports in Integrated Mode
    Deploying Reports in Integrated Mode
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click
    here.
    Fanny Liu
    TechNet Community Support

  • How do I get my subscription activation to "stick"?  30 days in and it is not working now???

    I signed up for the Creative Cloud on November 25th.  Everything went fine, I installed various software without any (known) issues and things worked...  On, or around, Saturday, Dec. 22, I got a "subscription activation" notification and I went through the process of logging into the account and it came back and said "subscription activated".  Photoshop worked, no problem.  Ten minutes later, with a third or fourth time of bringing up Photoshop (directily or via Bridge), it asked to go through the "subscription activation" again...  and again, and again.  Every other time, every third, fourth, fifth time bringing up Photoshop it would ask again.  Sometimes everything would work ok, other times Photoshop would just drop out and close.
    Same thing happened on Sunday... Each time it would tell me that the subscription was activated.  Each time, it came back, sometime in the next several uses.
    This has continued to ocurr ever since.
    This is NOT how I understood things were supposed to work.  I was under the impression that all I only had to have internet access ONCE, around the 30 day period for re-activation.  Not that it would require multiple / continual activations after 30 days.... 
    Not only is this an embarassment, when a client is with me, it is a royal pain in the neck and extremely time consuming (costly).
    "Chat" was of no help.  Nothing they can do, was what I was told, "it is a technical problem" and I have to call in...
    Calling in...  It didn't happen the one or two times they tried, it happened two or three times AFTER they were long gone.
    Now it has been over 30 days and "Chat" tells me there is nothing they can do about the problem and nothing they can do about cancelling the subscription, or even exchanging the remaining amount on my subscription towards an upgrade for a stand-a-lone version of Photoshop.  Quote:  I had 30 days to decide I didn't want to use the service.  Per the agreement, I can't cancel without paying a penalty.
    The service is NOT working as expected and the problem was not noticed until the 30 day mark, when activation was requested / required!!!  How could I have possibly known there was a problem until it came up??
    Very frustraighted...  and worse, I have no idea where to turn, who to ask...?????
    Account is active and I just received (via email) my recept for the payment having been received at the first 30 day date (today).

    Hi Jbierrie,
    There is an issue with Photoshop specifically related to recent updates in which causes the licensing to revert to trial after a certain number of launches (typically 2-3).
    The current workarounds are to either:
    - Sign in with your Adobe ID again every few launches
    - Uninstall Photoshop CS6 and then reinstall it but don't install any of the updates
    The issue with the updates is planned to be fixed in the coming weeks. Sorry for the inconvenience.
    -Dave

  • On screen lock screen, the keyboard does not work, switching to the switch-user screen the keyboard works again

    Mac OS-X 10.7.5, Mac Air.
    This began about 5 to 7 days ago.
    Steps to reproduce:
    Step 1:
    Close the lid, or the system 'powers down', or goes to the screen saver mode.
    Step 2:
    Open the lid, press the power button, or what ever to wake up the Mac Air
    The "Enter your password" screen is presented.
    They keyboard is not responsive, I cannot type anything.
    The touch pad works, I can power on/off the machine.
    They keyboard is not functional.
    Result: I cannot log in again.
    Expected behavior: The keyboard should be working I should be able to unlock the screen.
    Workarounds:
    Then click on my name, or any other user of the machine and it works fine.
    I can now unlock the screen and return to where I was.
    Expected behavior:
    I should not have to go to the "Switch User Screen" to log back in.

    More detail:  Some keys on the keyboard do work, ie: caps lock toggles the led, and the function keys across the top seem to work {that is I can adjust brightness, and so forth}
    the letter and numbers, and perhap others do not work.

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • ITunes match does not work on my iPhone or iPad

    I'm one of these lucky folks who has two Apple IDs because Apple decided to change from the single username to a MobileMe account a while back. Since Apple doesn't allow yet to concatenate both IDs, I have to use the single username ID for the iTunes store and the @me.com, actually @mac.com, ID for the rest.
    The problem then is when I want to use my iPhone or iPad with iTunes Match. Both devices want me to register to the @me.com ID but the music is under the single username ID. In fact the iPhone and iPad refuse to accept my username ID if it does not have the @me.com suffix.
    It's a mess and it does not work for me now. Has someone found a workaround or some way to get iTunes Match on the iPhone and iPad when there are two different IDs on iTunes?
    Thanks for your help.

    It appears that Apple has no idea how to fix this issue of double Apple IDs and iTunes Match. They decided to reimburse me for the purchase of the two iTunes Match I got with my two IDs. This doesn't solve the issue but at least I'm not out of cash for nothing.

Maybe you are looking for