N8 major email problems

I've been happy with my N8 but I've had quite a lot problems with my email. It worked fine at first with the exception that my sentmail didn't show in the sentmail folder. I then tried to fix the problem and adjust the settings by creating the email account again. I could not do that because the phone for some reason could not contact the mail server. Then I reseted the phone (not a hard reset). And when I tried to set up my email again I got the same error. So now I don't have the email working at all. What should I do?

hm, sounds strange.
Could you please provide the steps you did in more detail.
Here the email works fine. So,  if you describe what you actually did, then we can think about a solution.
Greetings from Sichuan, China

Similar Messages

  • 3.1 update, major audio problems!

    so i updated to 3.1 today and just noticed some major audio problems:
    1. when I answer a phone call I can't hear anything through the ear piece, but the caller can hear me. i can only hear them when I put them on speaker. same thing with voicemail.
    2. the ringer works when I get a call, but text, voicemail and email chimes/tones aren't audible at all.
    3. the built in speaker no longer works when playing iTunes music, YouTube, or games. i can only hear audio when plugging in headphones.
    all my settings are the same as before the update, but despite adjusting the volume controls/rocker none of the audio settings are working properly. i also reset/restarted the phone (home + sleep buttons) a few times, but no use. what the he'll is going on?
    Message was edited by: d.c.1

    I've got the same thing- from the speakers, no ring tone, games don't have speaker audio, no email or text audio-- except with the earphones. iTunes music plays thru the speakers but not games or afore-mentioned items. l've never had a problem before. also reset and restored- still the same.

  • Major Reconnection Problems

    Hey all,
    An editor just emailed me the project file of a rough cut for a feature we're both working on, and I've been having pretty major reconnection problems. Despite the fact that we're working with exactly the same files on two identical drives, when I try to reconnect all the media I get the message:
    +"The file does not have proper content to reconnect to "(clip name)" at time (timecode) in sequence "(sequence name".+
    +Click "OK" to make this item independent and go to the next clip or "Cancel" to skip all clips from this file."+
    When I click "OK" (which I have to do 200 times, as this problem reoccurs over and over with many different clips at many different points in time), it eventually reconnects.
    However, though it appears that the clips have all successfully reconnected, the sync for the entire project is almost completely off. Sometimes it reconnects to the wrong part of the correct audio clip, sometimes it substitutes the incorrect clip altogether.
    Does anyone have any idea how to solve this problem? It's been driving me crazy for weeks.

    Stumbled upon these problems today. Final Cut Pro did not way want to reconnect the media to the capture scratch files. Only thing I did was I moved them to another drive.
    What solved the problem: rename all scratch files by adding the extension '.mov'. Confirm they are now decent quicktime movies.
    You might want to learn the single unix terminal command to do this for the entire batch at once.

  • Email problems with BB synched via BES. No email notifications and can't send replies.

    This isn't a question, but more of a public service announcement for those like myself that manage to screw up their email settings. I recently had problems with my email in that I would not get audible or visual notifications of new email and I couldn't send replies although I could forward and create new emails. The problem is that I am using Desktop Manager on two PCs and only one is configured to access my corporate email account, the one that is redirected to the BB. The default settings of my Desktop Manager installation was to synchronize the device date and time automatically when connected to the PC. Connecting my BB to my home machine would cause the email problems. I had to wipe and reactivate to fix my problems.
    So, if you want to use the BB on two PCs and one is not configured for the email account going to the phone... disable the auto synchronization option BEFORE connecting the device to that machine and launching Desktop Manager. It would also be nice if the Desktop Manager installer had an option to install on a PC that is used for backup/recovery and application loading only. The installer had two options IIRC and your choice was that the BB is used with BES or with a personal email account.

    Internally, your invites are processed by the server.
    If an outside sends a new invite to you, the server doesn't know about it until you add the event to your calendar app.
    You'll find settings in Mail and Calendar apps (depending on client OS) to automatically add invites to the Calendar.
    So to sum it up.
    Internal users, processed in real-time directly by the server
    External invites, must be processed by the client app, and depending on OS/Settings, could require manually adding or acknowleding. Also.. in 10.7/10.8 you will see an inbox tray in the Calendar app, your invites may show up there (and you'll need to click to ack)
    Hope that helps.

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

    Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

    Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

    I forgot to write down my computer specs:
    iMac 27 Mid 2011
    2.7 GHz Intel Core i5
    4 GB 1333 MHz DDR3
    AMD Radeon HD 6770M 512 MB
    OS X 10.9.2

  • Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

    Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • VERY URGENT - Adobe forms with email problems

    I THERE - I AM A ADOBE FORMCENTRAL CLIENT I HAVE MY PAYEMENTS ON DAY BUT FOR SOME REASON THE ADOBE STOP RESENDING TO MY EMAUIL ACOUNT AND TO MY CLIENTS  EMAIL ACCOUNT THE SUMARY OF THE FORM THAT IS SUBMITED. THIS IS VERY URGENT THAT BE FIXED FROM YOU SIDE PLS LET ME KNOW WHAT IS HAPENING.
    PLS FIX THIS URGENT AS I HAVE MY CLIENTS SCREEMING ON ME
    PLS ANSWER TO
    [email protected]

    Now is working
    after 2 hours is working now. but this have never hapen before. now I am
    woried with this ADOBE FORM system!!!! it can hapen and I never know.
    br
    henrique
    2014-04-25 21:29 GMT+01:00 Josh_Corey <[email protected]>:
        Re: VERY URGENT - Adobe forms with email problems
    created by Josh_Corey <http://forums.adobe.com/people/Josh_Corey> in
    FormsCentral - View the full discussion<http://forums.adobe.com/message/6331228#6331228

  • Fix your email problem

    Use our Troubleshooting Tool to diagnose and fix common email problems.
    Troubleshoot Now
    Forgotten Telstra broadband username or password
    If you can’t remember your Telstra broadband username or password ([email protected], [email protected], [email protected]), you can retrieve your forgotten username or password.
    Can’t send or receive email
    If you can't send or receive email, it may be because:
    Your computer or mobile isn't connected to the internet. Check if you can access other websites. If you can't, check your network cables to ensure they’re plugged in correctly. You can also check our service status in your area.
    Your email has reached its storage capacity. Try deleting some old or unimportant emails to free up space.
    Your mailbox has been suspended. Get help on restoring a suspended mailbox.
    Your network has a firewall that’s blocking connections to your outgoing mail SMTP server.
    Your email settings or authentication aren’t set up correctly. You can check your settings using these guides:
    Set up Telstra email on the BigPond platform, on your computer
    Set up Telstra email on the Outlook.com platform, on your computer
    Set up Telstra email on the BigPond platform, on your tablet or mobile phone
    Set up Telstra email on the Outlook.com platform, on your tablet or mobile phone
    Can’t send emails, but can receive them, or prompted for a password to send email
    If you can’t send emails, but can receive them, it may be because your email server settings are out of date or your outgoing email traffic is blocked (in Port 25) to combat spam.
    A third party gatekeeper may be marking and blocking your emails as spam. In this case, you’ll get error messages from the gatekeeper. Read the messages carefully for help on how to fix the issue. If your account has been compromised, you should change your password, update your internet security software and run an anti-virus scan on each device that accesses the account.
    What to do about spam or unsolicited email
    If you’re receiving spam, it’s likely to be a hoax or scam. You can adjust your security settings to have higher restrictions on incoming email.
    If you’re receiving spam from an email address you know, the account could be compromised.
    If people are receiving spam from your email address, your account could be compromised. To restore your email service:
    Update the internet security software and run an anti-virus scan on each device that accesses the account
    Contact Telstra on 13 2200 to reactivate your mailbox
    Reset your password through My BigPond or My Account and update your gateway and email programs with the new password, which must be different to any previously used
    Learn more about Cyber Safety and how to protect your privacy online.
    Slow email connection
    If you experience a slow email connection, it could be due to a network issue or your email set up. To troubleshoot:
    If you're an ADSL or Cable customer, use our Troubleshooting Tool
    Check for known issues in your area that may be affecting your service
    For general assistance
    Contact our faults and technical support team for general assistance on 13 3933
    Contact 24x7 Chat
    Subscribe to Telstra Platinum for access to our technology experts on the phone, online or in-store, including 24x7 support and in-home options.

    It doesn't address what I needed help with
    My outlook email on my bigpond account is too slow it's taking far to long to download emails and it does not download all e.g. I have 99 emails and it has only downloaded 26. I have checked the service in my area and it reports OK as of 18/12/14. My ADSL is working properly and is connected through my phone line. Please help urgently as it affects my business.

  • Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

    Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
    The view stops after a while and only the Loading… (icon) can be seen on the page.
    Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
    Test the html5 version of this project at: http://kurs.dokker.no/captivate/
    and see for yourself what happends.

    I changed the Preferences/Project/Start and End  Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
    stopped like before on one of the first slides, loading… screen like before in IE11.
    In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
    In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
    In Opera 23.0 sound was missing and else working as bad as IE.
    All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
    I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

  • Major system problems, hanging up at startup.

    I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
    Thanks for your help,
    Dick Skover

    Dick,
    Some observations and notes.
    Have you tried using a different mouse, or changing
    the port it is plugged into?
    Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
    How did you upgrade from Jaguar 10.2.x to
    Panther 10.3.9?
    I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
    What size is your Hard Drive, and how much space is
    available? I should say I have quite a few applications.
    My HD is 75 Gig with 17 Gig available.
    Is your installed RAM original or added?
    Yes, it came installed when I purchased it: 1.5 Gig
    In one post you wrote "My original system disks
    for this computer is Jaguar 10.2..."
    I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
    But in another, you wrote "Yes, my original
    Panther disk and then updated everything via
    Internet."
    Please clarify.
    When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
    "Yes, Disk Warrior found some problems, I don't
    know exactly what they were."
    Were the errors corrected? Have you rerun Disk
    Warrior, to see if they are indeed repaired?
    Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
    A couple other things you can check.
    Open System Preferences > Accounts > Your Account >
    Startup Items.
    Is there any item in there that you are not familiar
    with, or did not put there yourself?
    Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
    From the Utilities folder, start Activity
    Monitor.
    Select Active Processes.
    Watch for whatever process is hogging %CPU.
    Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
    I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
    I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
    ali b

  • 10.4.9 - Major audio problems with digital audio

    I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
    I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
    I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
    I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
    I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
    I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
    Anyone else have any problems with their digital audio input/outputs?

    I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

  • Survey of intermittent email problems on edge

    I have posted here before about my iphone having intermittent email problems. Usually when I am on the edge network it can sometimes take minutes before my phone downloads email. Sometimes it never downloads them at all. I have my account setup for imap and thought this may be do to the fact I have 100 email sub folders. However these are only for filing with no server side processing to file mail to individual folders. For the most part the issue is limited to edge network access but sometimes does happen when connected to wifi. Of the 8 or so people I have talked to who own iphones only 1 does not seem to have a problem like this. All 8 of us are on different mail servers also.
    So I am curious how many others out there are regularly having issues pulling down email on your iphone? And if so is it limited to edge network access or when you are accessing your mail over wifi? Has anyone owned a blackberry and had issues like these?

    I don't have a problem since I fixed it. I have 4 email accounts: 2 POP3, One IMAP and one Exchange configured as IMAP. I never have a problem retrieving email via EDGE or WiFi. Your problem description is too general to recommend a single solution, however.
    Blackberrys cannot handle rich text email, so all messages are short and download quickly. On the iPhone if you have a message that contains HTML, graphics or MIME attachments they can be quite large - up to several megabytes. Clearly these will take a long time to download. The same email received by a Blackberry will only get the text version of the message, which is a couple of K.
    If you are accessing an Exchange server and get "message could not be downloaded" errors, delete the account and recreate it using IMAP rather than Exchange as the server type.
    If you are accessing a POP3 account and you have a primary computer somewhere powered on that periodically retrieves email the message will be removed from the server before your iPhone downloads it sometimes. The solution is to either shut down the mail client when away from the computer or change its options to leave messages on the server.
    For IMAP you shouldn't see any of these problems, except that if you open a folder it retrieves messages in that folder AFTER the folder is opened; it doesn't sync folders automatically.

  • If I reset my iPad in order to fix my email problem, will I lose everything on it....like my books?

    If I reset my iPad to fix a email problem will I lose everything on it.....like books?

    If you reset by pressing and holding the home and power buttons for at least 10 seconds until the Apple Logo appears, you won't lose anything at all.  It's nothing more than rebooting your iPad, like rebooting your computer.

Maybe you are looking for