N8 no longer responding after fingerprint V3.0 dow...

Hello ! I have an urgent problem if it is possible to have a quick help I have a nokia N8-00 phone I downloaded an app from OVI store called ":fingerprint V3.0 " . Since I have launched it my mobile isn't latterly working nor responding ... I do really need help.
Thank you
MODERATOR'S NOTE:
This post has been moved from a different topic and has been created a new topic.

Hello Nabila,
Sounds like the installation of the app has done some thing to your phone, Try holding the power button down for 30 seconds or untill it vibrates three times, then restart it and try again.
Can you press or do anything on the phone?
If this fails to help then you may have to take your phone to the closest care center for re-flashing.
Cheers
"Freedom is the only way, yeah!"

Similar Messages

  • IPhone 3GS Problem/Touch Controls no longer respond after random intervals

    Hi all,
    I need some answers regarding my iPhone 3GS 32gig, which was working perfectly until about a month ago, after I upgraded to firmware v3.1.
    The touch screen 'locks up' i.e. it won't accept any input via the screen and seems to happen at random intervals, but the app continues to run. If I leave it long enough, it'll accept input again after a minute or two, otherwise, I hit the sleep button and then the home button to wake it, and it obeys my commands again. But only until the next time. It can occur using ANY app but really ***** when I'm de-stressing with a good game of Space Invaders Infinity Gene.
    I've tried all sorts of things to correct the issue based on what I've read on the web, foremost, restoring the iPhone from a backup. That didn't help. I had about 500meg of free space left and thought maybe it needs more than that to function perfectly, so I deleted a lot of games and apps (mostly lite versions) and freed up enough space so that 1 gig was left available. Still no help. Tried restoring again, still no change.
    When the 3.1.2 update came out, I hoped it would fix it. Alas, no.
    Push notifications are turned off for my Mobile Me account, and for all the other apps that allow push notifications. I'm with Optus, not that that would make a difference (?).
    Given that apps run one at-a-time, I can't believe any single app could be causing this behaviour, and I don't like the idea of trying to find out what that app might be if it is by copying them individually back to the iPhone just to see when the problem comes back again.
    Oh yeah, and I've not jail broken my iPhone. Seriously.
    Can anyone make any other suggestions? I imagine resetting all settings from the Settings screen will delete my progress on Space Invaders Infinity Gene, so I'd rather not if I can help it.
    Thanks in advance!
    - Alex

    Not that it helps, but a me too here.
    It randomly seems to stop responding for a while.
    I often find I cant skip tracks in the music player etc.
    This is a brand new stock phone, upgraded to 3.1.
    Sleeping and turning on again seems to fix it, or waiting for ages

  • VPN no longer responds after a restart

    Hi,
    I have several iPhones and Macs allowed to connect to the VPN server and everything works wonderfully - that is until I restart either or both the server and/or the Time Capsule it is managing. The clients receive a message that the L2TP server is not responding when attempting to reconnect. The only solution I have found involves toggling VPN services Off/On after which all is well again. Am I alone with this anomaly?
    My routing setup is this:
    ADSL Modem > Time Capsule (Dual Band) > Mac Mini Server
    Time Capsule (DHCP router) allocates a fixed LAN IP address to the server, all three devices are connected to each other by Ethernet.

    It appears that ML no longer supports 32bit applications at all. 
    Therefore, you have 2 options:
    1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server.   You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface.   I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
    2) Move over to the Cisco AnyConnect VPN client, which does support 64bit.  This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself.   I went to this method yesterday and it's worked out great so far.

  • USB Cable no longer responding after iTunes update?

    I recently downloaded the iTunes update version 6.0.4 to my Dell Laptop. However, when I go to synch up my iPod, upon plugging in my iPod, I get a message from my computer that says "USB Device not recognized". I have tried the USB connection in numerous USB docks, however keep getting the same message. The iPod says "Do not disconnect" but it does not synch up with iTunes, even after I leave it there for about 10 minutes.
    I have downloaded then re-installed the iPod Updater Version 2006-01-10 and re-booted my computer but still the USB connection is not recognized.
    Any suggestions? Thanks!
    20GB iPod   Windows XP  

    See these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage "    ". Do you want to stop running the script, or let it continue? If I  click on continue it just continues,

    I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage "    ". Do you want to stop running the script, or let it continue? If I  click on continue it just continues, stop, it stops.  How to correct this annoying message?

    Disable Javascript for those webpages.  Note, your Javascript is probably antiquated by now.  Try a different web browser, or contact the website and let them know they aren't as accessible as they could be*:
    http://www.macmaps.com/browser.html

  • After a recent software update my iphoto program no longer responds and freezes  the my imac

    After a recent software update I opened iphoto and was asked if I would like my photos geographic location used for mapping where photos were taken, I answered no and now Iphoto no longer responds and freezes all computer functions. Unable to force quite application. What can I do?

    This is iPhoto for iOS, not OSX.  Despite having the same name, they are completely different programs.  You should repost your question in the iLife/iPhoto area.

  • After trying to reset the backup on my iphone, it is no longer responding. it's stck on a blank loading screen and i cant do anything on it.

    After trying to reset the backup on my phone, it is no longer responding. ios7.1 was downloaded but all my info was deleated so i tried restoring it and while it was loading, the screen froze. it reaches a certain point, shuts down, and starts all over again. i cant turn it off or do anything with it. how can i atleast get it to function again or leave the loading screen?

    TROUBLESHOOTING STEPS ARE THESE:
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears then let go.
    Backup, reset, restore on icloud or iTunes or restore as new.
    Place the phone into recovery mode by doing this
    If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Mail app no longer responds on iPad 2

    Greetings to all,
    Using an iPad 2, my mail app froze up after trying to send an email with 6 pictures (taken with an iPhone 6) attached. 
    The mail was saved as a draft.  As I tried to (re)open it for editing/finalization, the Mail app stopped responding after freezing on me.
    Now the app mail app will open, but without displaying any contents and only for a few second only.  The device then returns to the home screen.
    I already tried to turn the device off and back on.  I also reset it.  Finally I proceeded in an attempt to delete the account from which the mail was to be sent and reset the device again... None of the above worked. Mail just seems 'dead', unresponsive. All other apps seem to work fine.
    Any ideas/leads, anyone?! 
    Thank you.

    I Don't know if the app will stay open long enough to delete the email, but have you tried that?. If you can get to the draft in the preview window on the left side, swipe across the email from right to left to get the delete button to pop up. Then delete the email. I assume, as I'm sure you do by know, that one of the photos is corrupt, or something in that particular draft is causing the problems.
    IF your email account is an IMAP Account, use a computer and log into your email in a browser and delete the email from there. IMAP email accounts actions will sync across devices, so that will remove it from the mail app on the iPad as well.

  • ITunes no longer responds... Please help!

    Since I updated the latest version of iTunes, it no longer responds... I open it up and it'll just have an open window on the bottom of the screen. But not only does it only give me the option to close when I right click the window, after I close it says "iTunes is not responding..." My iPod seems fine it charges up and plays normally, but not iTunes since I updated it.
    I tried to download it again, but it asked if I wanted to repair files or remove iTunes. I chose repair and it went according to plan, but no change. PLEASE help!

    I googled on "Windows Installer Service could not be accessed" and the one I posted was the top hit. There were others from the Microsoft website - it sure seems like a WIndows problem, and not necessarily an iTunes problem.
    This second hit talks about re-registering the Windows Installer service.
    http://support.microsoft.com/kb/315346
    Good luck!

  • Microphone no longer works after upgrade to windows 8.1

    After upgrade to windows 8.1 my internal microphone no longer works.
    I tried installing updates suggested in other posts with similar driver problems but they did not work.
    HPSupportSolutionsFramework-en-11.51.0048 did not work.
    My internal microphone is IDT High Definition Audio Codec
    When I go through the control panel  and look at it - it shows a status of "not plugged in"
    Please help 
    thanks

    OK I am a little confused.
    There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
    However I just received the following email from you:
    Hello gordml,
    The questions you posted on the HP Support Forum recently received one or more answers.
    Question: Microphone no longer works after upgrade to windows 8.1
    Date: Sun Dec 21 01:01:56 PST 2014
    View the answer(s).
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
    Thanks for being a member!
    The HP Support Forum Team"
    Why would this be sent to me if there has been no recent replies on this issue?

  • HP OMEN Control Software No Longer Works After Windows 10 Upgrade

    HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

    I just purchased a new 2015 refurbished PC.  It worked great with Windows 8.1.   Upon installing Windows 10, The Omen control did not work as well as the fan.  Really - hardware failure.  Give us a break.  So, I went back to Windows 8.1. Also this year, I purchased an Envy X2.  This PC included a bluetooth keyboard that kept detatching.  Again - REALLY, the keyboard doesn't work.  That's a pretty important part of the PC.  I searched the forum for answers and all I found was the same old line that HP was working on it.  I found meesages over a year old that had this same  problem. So, back it went to Best Buy.  I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO.  Why - because they had to know about this issue alrady for quite a while.  And, they did not fix it.  I really hope they prove me wrong.!! I will give them 1 more week to fix it.  After that, the PC will be returned.  And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360.  To my amazement, I am even considering a MacBook Pro.  Funny thing - the Spectre X360 is supposed to be a great laptop,  But, Microsoft was heavily involved in the design process.  That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess.  TImes like these are opportuniies to win over customers or loose customers to the competiion.  I really want to keep this PC.  It is by your response to this problem that will determine the outcome.

  • Mobile Service API no longer working after making app public: 503 Service is unavailable

    Hi guys,
    I've been running my Azure Mobile Service in a private beta for a few months now with about 5000 beta testers. My Mobile Service has been working perfectly until I decided to make the app public on the Windows Phone Store. A few minutes after that calls to
    the service's API are no longer responding. I debugged my app to see if I could figure out what was wrong, and the mobile service client isn't throwing any exceptions, after the API call is made nothing at all happens.
    Both my service and the app are written in .NET C# (the app is also a WinRT app). The mobile service code hasn't been modified in a month, and the code within my app that makes the API calls hasn't been changed since I first wrote it. Also, the service logs
    in the dashboard are now blank since the app launched.
    If you have any ideas, that'd be awesome. The app depends on the mobile service to function 100%.
    Thanks!
    EDIT: After trying to load the service's URL in my browser (http://mytube.azure-mobile.net/) I eventually got an error message saying "HTTP Error 503. The service is unavailable." The status of the
    service on the dashboard says "Ready."
    According to the dashboard I have not gotten anywhere near the quota for API calls, and I have even upgraded my account to receive more API calls. The service works locally running it in IIS, and I have tried re-deploying it from Visual Studio.
    Ryken Productions

    Ryken,
    Are you on the test development version (Free) or have you moved up to Basic or Standard for your product app?
    Jeff
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)
    Yes I have Jeff, I was originally on Basic, but upgraded to Standard after the issue started happening hoping it would help.
    Ryken Productions

  • Aafter finding my ipad my pc froze and is no longer responding on exployer firefox or ms streets

    Pc not responding after finding ipad. Started with firefox then exployer. Now malawars and microsoft streets will not respond

    Hi pacearly,
    Thank you for your question I understand that when you try to pin a site, the pin window does not open wide enough for you to click the pin button. This sounds annoying. I also understand that duplicates are no longer detected when you try to pin some websites. I also understand that this function is working in safari, but not Firefox.
    This sounds like a job for the Web Compatibility Team. This team is dedicated to helping the Firefox browser render websites like they are supposed to. Please try a new profile to make sure it is not a preference that is blocking this functionality on this site by [[Use the Profile Manager to create and remove Firefox profiles]] If it still happens please add your description of the problem and a log capture or screenshot of the webpage at this site: [http://dev.webcompat.com]
    If you have any other questions about this we are happy to help.
    For more information on troubleshooting addons:
    [[Add-Ons and Extensions FAQ]]

  • My iPhone's touchscreen is no longer responding!

    So here's my issue...
    I answered a call, hung up and set the phone down. The next time I picked it up the touchscreen was no longer responding. I tried cleaning the screen, home button reset, hard reset, restored to factory settings and nothing is working. There's no damage to the phone and I haven't cracked it at all to add apps. Just your standard usage.
    Ideas, anyone?.... Beuller?

    I'm not buying that an extra $15/month = a page loading 10 seconds faster. I love Apple, but AT&T is not my favorite phone company in the world due to plans like these.
    Lets look at it this way... sure all the blogs say that with the 2-yr contract you'll be paying more for the phone than if you were purchasing it at full price like the first model (I like to call it the OG-phone). But how many of us will be having our iPhone's for far longer than that? Most likely on AT&T as long as they have the exclusive rights to it. So after that 2 years, you're looking at an extra $15/month added to the price of that phone. That's not even if you take into account AT&T now saying if you don't "qualify" for a plan upgrade.... we're gonna charge you even more for that phone.
    I'm just not a fan of phone companies in general. I don't care how much advertising I see saying how much better they are than everyone else.... I work with advertising agencies... kings of spin.

Maybe you are looking for