N80 and GPS pairing problem

I have a BT GPS module (Holux M-1000B) and when I pair it for the first time with my N80 it works ok as long as I don't disconnect it. But if I stop using it (for example if I stop in Sports Tracker) I have to remove the pairing to reconnect. I've tried everything and the only way to reconnect is to remove the pairing and pair them again and that is pretty annoying.
Is this a known problem with other GPS modules also or is it with this one? It works perfectly with my laptop, but I haven't tried using it with other mobiles.
(N80 fw v. 5.0719.0.2)
Message Edited by aanirone on 29-Dec-2007 08:40 PM

Hi aanirone
If it is of any help I notice that Nokia Maps application is now available for the N80, which has not been supported since Smart2Go beta version was withdrawn:
http://europe.nokia.com/A4509291
As N80 firmware has now reached end of development, you would expect that this application has been tested with last software release in the circumstances.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

N80 and Serious Video problems

I am so not impressed with the Nokia N80 Video Function.
I am having major problems in playing 95% of my videos from my old K750 which plays them with out problems.
Real player opens. Then stops for s few seconds starts again plays about 4 seconds, stops and starts again.
It doesnt matter much on the videos.
Its like the phone cant handle them or real player has a major problem.
The 4 second dealy or the major problems is when i use the memory card.
The phone still cant handle the video correctly when on the phone memory, The video stutters, Musics goes of and on.
This is such a let down in other wise a great phone.
I just cant beleive that my K700, K750 and K600 can play all the vids with out probs.
Any one else ?Message Edited by darrengf on 09-May-2006
08:03 PM

Yes same here.
The stutters are dreadful and sound keeps going of and on.
This is a Smart phone, But so far my K700 which is over 2 years old is smarter.
I just dont understand why, Nokia if you are reading this then please fix in your next firmware, Real Player is either Rubbish or the phone some how cant transfer the data / details over fast enough.
On some occasions opening up a video can take the phone over a 1min which i then think the phone has crashed.
Its like my computer when running more than 1 programme at a time, They start to stutter.

N80 Bluetooth GPS Problems ???

Navicore have a Symbian series 3 version of their navigation software available unfotunately they do NOT support the N80, their official reply to me :
'It has been unfortunately identified that there are some problems in the Bluetooth connection between N80 and a GPS receiver. Therefore an application like Navicore using a Bluetooth GPS connection does not work in a reliable way. The problem is under further investigation and we shall add N80 to the list of compatible phones as soon as there is a solution available.'
is there an official reeponse from Nokia to this ????Message Edited by energylevel on 19-Jul-2006
10:50 AM

I have the same problem with Nokia N80 (firmware V 3.0617.0.6). You can take a look at this thread:
http://discussions.europe.nokia.com/discussions/board/message?board.id=connectivity&message.id=2715&...
So far I haven't received Nokia feedback and looks like no newer firmware exists at the moment.
DziugasMessage Edited by mnlz on 19-Jul-2006
11:50 AM

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

SL3100 Pairing problem and the lack of intelligent reply from creative

I posted a message a day or two ago about having trouble pairing my SL300 with its own adapter. This was a brand new out of the box unit. Since the unit was new I thought I'd ask Creative to assist and wrote to their tech support, who returned with following response. In my opinion this response shows a total lack of product knowledge or any concern whatever that one of their OWN products does not work. Here is the response I received when I could not pair THEIR ADAPTER with THEIR HEADSET? both of which came in a sealed box from THEM?I apologize for any inconvenience this may have caused you. However, let me try my best to help you out in resolving this issue.
To assist you on this, you may want to try on the following
troubleshooting tips and see if they could help:
1. Try unpairing the headset. A headset can only be paired to one device at a time.
2. Recharge the headset and try pairing the headset once more. A headset will not automatically pair with the device again when powered on.
3. Check that the device being paired to the headset has its Bluetooth feature(s) turned on.
4. Ensure the headset is turned on and the battery is fully charged.
5. Ensure the headset is within one meter of the device while pairing.
6. Remove and replace the device's battery (if the device has a replaceable battery) and try pairing the device and the headset again.
7. If prompted by the device for a passkey, enter 0000.
8. Make sure the Bluetooth headset and the device are both running compatible protocols.
9. Make sure the Bluetooth headset and the device are both running compatible protocols.
10. Make sure there are no obstructions between the device and the headset when pairing.
11. Make sure the pairing is being initiated on the headset, not the device the headset is being connected to.
If the issue would still persist, the product may need to be repaired/replaced.
The problem you described indicates your unit may require repair or replacement. If possible, try exchanging the product for another from the vendor, for this may be much quicker and easier than having an RMA (Return Merchandise Authorization) issued. If this is not possible, an RMA will need to be arranged to have your product tested for repair/replacement.
If the product has exceeded its one year warranty period, an out-of-warranty RMA will need to be issued. This type of RMA requires a non-refundable US $25.00 diagnostics and handling fee for each out-of-warranty product. The fee is applied toward the complete cost of repair/replacement. If the cost of the repair/replacement exceeds the initial diagnostic fee, the RMA department will contact you to obtain your authorization for finance of the remaining fee. If the product has not exceeded its warranty, no diagnostic fee is required.

It is pretty standard practice for you to get a more general response first time as it eliminates most users problems. And, unless you doing the pairing incorrectly, it seems the email does suggest an answer (its faulty) and recommends replacement.
I would assume the problem is its broke too, so just try to return it to the shop you got it from.
Message Edited by lakin on 04-15-2007 10:02 PM

N80 and headsets

Hi all,
Hope you can help out, had an N80 for a couple of weeks now, and I have one annoying issue with the phone (well apart from the flakey software which i hope a trip into a nokia store and a free firmware upgrade will fix). I've paired my nokia hs-36 with the handset no problem but whenever I switch the headset on the phone turns the volume right down (ie so I cant hear anything at all) my old 6230i never did this so it must be something the phone is doing to my headset. Also when people call me and I press the headset answer key I get a brief spurt of acceptable volue (i.e. enough time for someone to go hello) then the volume mutes/minimises again.
Is anyone else having this problem and more importantly is there a fix for it, as I keep having to fiddle with the volume which is a little annoying to say the least.
Dale

Hi there, I had problems with the bluetooth too. I have the same firmware as you and was having problems with a headset. I took it to Phoneland and although there is no new firmware at the moment there is a service upgrade (Bluetoothe, Wi-Fi etc)which fixed the problem with the headset. Maybe you need to get yours done too. Just tell them your having trouble with bluetooth and they will have a look. It's free too as long as it's still under warranty. Hope this helps.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

The raw portion of a referenced master got separated from its jpeg pair when I was relocating originals. Can I recombine the raw and jpeg pair?

Hi, I'm a fairly new Aperture user and have just started storing my photos on an external hard drive. An error message appeared when I was relocating originals of a project. It stopped relocating at one image, saying that the jpeg file did not exist. I found the raw file name under the new project folder that I was relocating it to, but it's jpeg pair did not move. The file names look identical except one ends in .JPG and the other as .NEF. I tried to combine originals, but I got the same error message and when I looked at the files the raw now had (1) attached to it, whereas the jped didn't. The Aperture window started to close unexpectedly many times. I tried Repair Permissions and Repair Database and that seemed to stop Aperture from closing unexpectedly, but the raw and jpeg pair are still in separate folders. How can I get them paired up again or does it matter? I'm using Mac OS X and Aperture version 3.4.5.
Thanks,
sophie

If you don't take care when choosing the location for referenced images, you can create some problems for yourself.
From an operational perspective 'Managed' images means Aperture will take care of the image file storage for you, 'Referenced' means you will take care of it yourself.
There are a number of things that may have happened but this is what I think is most likely:
If you shoot a lot of photos with the same brand of camera, eventually you'll end up with duplicate file names, for example two different files called DSC_1234.NEF. If you attempt to store these in the same folder yourself, worse case scenario is you may inadvertently overwite one of the files. If you use Aperture to relocate, you'll get one of the files with a new name of DSC_1234 (1).NEF.
So your first step is to figure out what these files really are. Are they duplicates, or are they different files with the same name, and do they each have a matching .JPG
Aperture has the tools to fix up the problem, but you need to confirm what the problem is first.
If you don't have many of the (1) files, it may be worth continuing your 'relocate' to subfolders - making sure your subfolder hierarchy doesn't cause duplicate names to be stored together. Then when everything else is stored correctly, address the problem images by moving them to where they should be, with the right name and the JPG/NEF pairs together.
You can then search for missing files in Aperture and use the 'Locate Referenced Images' to reconnect them with Aperture.
Andy

TS3048 wireless keyboard pairing problems

hello there
have been trying to pair a wireless keyboard to my macbook, am given a code by the BlueTooth assistant and told to enter it into the dialogue box when prompted, but do not receive the prompt and the pairing attempt times out.
any idea what the problem might be?
cheers

Hello:
Was the KB, by chance, paired with another device?
Barry

N8 and Drive App Problems

So heres my problem
Downloaded maps - Great!
Created Route and added to favorite - Great
Sync and transfer - Great
Set up to Drive Offline - Great
Get in car select drive app and route, wait a couple of minites for it to settle down and then it all starts to go wrong.
Instantly trys to send me the wrong way out of my road and carries on like this for a few miles until finally picks up the route. Okay you say! Not on your life. On motorways trys to take me off and on slip roads, A roads sends me in circles?
Luckily only tried it on routes I know , and yes the route is the same as saved to favorites, wouldn't trust it to get me to somewhere I didn't know.
So why is it doing this? Surely the whole point of putting a route in YOU want to follow is just that!!!!!!!

@discobandit
Not clear whether you are trying to use N8 without Assisted GPS being able to access data connection or not here. Whilst GPS antenna size/position compromise is not brilliant upon N8, there can be like with any GPS device problems using within vehicles with Athermic, or UV Coated windscreens.
Happy to have helped forum with a Support Ratio = 42.5

N80 and WiFi EAP-LEAP

Hi Forum,
I have had huge problems with WiFi, hence I got it firmware upgraded to the p.t. latest fw version 4.0623.0.41 RM-92 N80 (03).
Now WiFi and Bluetooth works alot better and sure alot faster. I recommed getting latest fw !
I discovered that LEAP is supported for Wifi and since I have LEAP on the job i though I would give it a try.
Now I am the network administrator on my job, so I have 100% controll over the wireless installations etc.
I can not get the N80 to work with LEAP at all !
I get user authenticated, byt I never get an IP from DHCP.
I did debug, and the phone doesnt sent any DHCP requests etc, as clients must.
Ok - then I tell the phone to use static IP.
Still notthing happends - I get user auth ok and thats it !
I can only conclude that Nokia N80 and Cisco Systems Aironet platform doesnt work.
Are there ANYONE who has LEAP running on the N80 ??
I for sure would like to hear about the setup, so please di tell.

I am running a broadcast (public) SSID, and running on the N80 Internet Edition firmware.
I suppose I may have to accept that the N80 WIFI just does not work with EAP et al., I have debugged the EAP negotiation on the AP and the RADIUS server and everything appears normal - however the N80 will not assume an IP address nor will it pass traffic when performing link state tests from the AP (I am using a Cisco AP1220, 802.11g radio, and image c1200-k9w7-mx.123-8.JEA).
Such is life - hopefully the N95 will work...
JJ

Magic Trackpad - Pairing Problems Switching Between OS X & Windows

My system has Mac OS 10.6.4 (with Magic Trackpad update 1.0 installed) and Windows 7 (with Bootcamp 3.1 plus the "Magic Trackpad/27" Cinema Display" update). The Trackpad works correctly after setup in OS X with all functions working even after reboots. The Trackpad also works correctly after setup in Windows 7 (with passkey 0000) and continues to work correctly with the supported features with multiple reboots into Windows 7.
The problem is that after using Windows, when I reboot to OS X the Trackpad will not function. It shows as paired but disconnected and will not stay connected. If I un-pair and then re-pair it will work. And the same thing happen when I switch from OS X to Windows - it shows as paired but unconnected and the only way to get it to work is to un-pair and then re-pair.
I had a similar sort of problem with the Magic Mouse and found that if I un-pair in OS X, pair in Windows, and then pair in OS X it will work with both. But the Trackpad won't work this way, even after trying this. I think the problem is that the Trackpad won't allow paring with two different systems (for the obvious reason) but isn't designed to accommodate the Bootcamp scenario.
I really like the Magic Trackpad and would like to be able to use it on those rare occasions when I need to use Windows without the hassle of reinstalling it each time I boot a different OS. Any solution to this problem?

UPDATE: I installed Vista on Bootcamp and tried the Magic TrackPad driver. It has the same problem. I can get the device to work as advertised on the initial install and reboots in the same OS. But when you switch from Windows to Mac OS X (or vice-versa) the device will not work: in Windows is listed as paired and connected, but does not work. In Mac OS X, it will not connect automatically and does not work. If you manually try to connect the Bluetooth icon briefly shows connected and then disconnects.
I sent a bug report to Apple as a "developer" and they state that it is a known issue. I guess we simply wait for them to get around fixing the drivers at some point in the distant future. Clearly they ignore these forums altogether. The experience has left me disappointed with Apple and their slow and inadequate response to problems. I would rather they devote some resources to getting their existing products to work instead of wasting resources to add iPhone-style displays to Mac OS X. If I wanted buggy drivers and no support I should have just stayed with Windows.

IPhone 4 pairing problem

I bought a Monster Cable Clarity HD Micro speaker (bluetooth) and had no problem pairing it to my MacBook Pro or my iPad. However, on my iPhone 4, the phone recognized the speaker, identified it on the screen but would not present a screen to input the PIN ...and pairing failed. Repeated attempts all provided same result. Any help is appreciated. jw

Thank you, for taking the time to communicate your thoughts.
My first question is : Will the iPhone 4 work with the WEP870?
Second if it will, what must be done to make that happen?
It should be in the best interest of the Apple community to assist users of apple products in getting the best possible value out of the products. That would include the use of compatible OEM devices. I have been seeking information from other sources. If that had been helpful I wouldn't be here. My hope was that some kind person would have had a similar experience and would know the answer to my questions. If there is no one out there that can answer the questions, that will not surprise me.

Macbook pro retina - Sennheiser mm450 bluetooth pairing problem

Sorry people but have, with surprise, comunicate a bluetotth pairing problem of my Sennheiser MM450 bluetotth headset with my new macbook pro retina 15".
No headset detected by may mac.
No problems with other bluetooth devices and this macbook.
No problems with this headset and iphone or other computer.
I'm very disapointed.
Hope to have some suggestion for solve the problem
Thanks

It may be necessary to turn on the aptX codec via Bluetooth Explorer -> Utilities -> Special Options
That did the trick for me.
The bluetooth explorer used to be available by pressing option then the bluetooth button, but now its bundled seperatly either with xcode or here :https://developer.apple.com/downloads/index.action?name=bluetooth%20explorer

N80 and Motorola IHF1000 Bluetooth car kit

Hi all,
I've been unable to get my Nokia N80 to correctly pair with the standard bluetooth car kit supplied with the car. I have also downloaded the latest firmware, but this does not seem to rectify the issue.
Is there another solution instead of moving to another phone manufacturer?

I'm now with Sony Ericsson and the above post should have been my last were it not for a rather belated response to my enquiry with Nokia 'Support'. Moderators really should take note to the response that Nokia 'support' team offer as it is in their direction that the moderators will often send bemused Nokia owners who need help on this forum: - -------------------------------------------------- Dear Mr xxx Thank you for contacting Nokia Helpline. With regard to your email concerning the Nokia N80, we can advise as Nokia do not test out handste with any third party software or deivices we can not say wether they will be compatabile. Please don't hesitate to contact us again if you have any further questions. With best regards UK & Ireland Team Nokia Helpline ---------------------------------------------------- It has taken the best part of 3 weeks to receive the above response which, quite frankly, offers absolutely no help whatsoever!! Quite an admission though. Just to repeat what they have said above....NOKIA do NOT test their handsets with ANY third party software or device. This leaves owners such as myself, who spec car-kits at he point of buying a new car because they prefer the integrated equipment rather than an 'add-on', completely high and dry! I still have the N80 and intend to keep it as a constant reminder NEVER to buy anything made by Nokia again. ttfn

Efficient optimized way to read from serial port and GPS data display using map

Hi,
I have a custom h/w which reads the data from GPS Rx and after parsing send it to PC over RS232.
Each second it sends 201 bytes to PC. I have developed a VI to read the GPS data and display it. Project file is attached.
Fulctionality of different loops are as following:
1. LOOP 1: 1.1 Reads the serial data from com port.
               1.2 Synclonize the frame using start bytes "a" and "z".
               1.3 Reads next 4 bytes containg receiving error information.
               1.4 Reads next 195 bytes. in which initial 80 byes are GPS data. rest are others.
2. LOOP 2: 2.1 Extarcts the GPS information and put them in an array.
                  2.2 Extarcts the receive error infor and counts the total error by incrimenting the variable using shift reg.
3. LOOP 3:3: 3.1 Displays the GPS data in chart and log the data in a file.
4. FLOW : Uses the GMAP .NET based API to creat a MAP and display.
Problem statement:
1. Functionality acheived.
2. However in between data set is being missed by the programm.
Quesitions:
1. Is the developed VI is efficient in terms of using queue loacl variables etc.
2. What are the improvments I can do to solve the problem.
Any other suggestions|
Thank you
jayant
jayant
Attachments:
Telemetry_Receiver_v2.zip ‏3075 KB

One of the most common problems in serial communication is the need for an adequate timing: how much time is expected your device to spend before answering? Have you put and adequate pause in your code before reading from the serial port?
Hope this helps
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

N80 and GPS pairing problem

Similar Messages

Maybe you are looking for