N80 SCREEN GOES BLANK

Hi everyone im new here .....anyway lets go stairght to the topic.
i own a nokia N80 (11)
firmware:v 5.0719.0.2
The problem is everytime slode open my phone the screen goes blank for about 7 to 10 sec and then it returns back to its normal state,note this i also encounter nonresponsive down arrow key while the flip is open....
can anyone please shed some on this,.......

11-Sep-200701:08 PM
ken80ny wrote:
, I think it would be frustrating if in the coming years of owning a N80 requires you a frequent visit to Nokia Care Center to celebrate your phone's annivesary!
Pathetic,
11-Sep-200701:08 PM
ken80ny wrote:
Hence, I strongly urge every N80 owners to speak up to Nokia to step up the quality of the ribbon supplied and provide long term solution for these type of failure in future. Nokia should give free repair if the matter got bigger. Agree?
Hell yeah.
11-Sep-200701:08 PM
ken80ny wrote:
If you feel my frustration because you are experiencing the same problem that I faced, let Nokia feel it too!

Similar Messages

When ever i insert microsim my screen goes blank with just apple logo on screen ...Without sim it is ok...I dont know what to do

I just recently bought IPAD2....Whenever i inserted my microsim into sim tray, the screen goes blank with only apple logo to show...It does not start till i remove the sim and press both Home and Power buttons simulataneously...Can somebody help what shall i do????

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

Screen Goes Blank, Hard Drive Stuck, Cannot Re-Install, or recover

I have somewhat a bizzar problem that even with several years of IT experience I seam not to be able to figure it out. I thought I toss it our here at Toshiba community in hopes of people's collective experience shedding some lights on my problem.
I hava a 3 year old Toshiba Sattellite A305D with updated BIOS to version 2.10. It came with Windows Vista Home 32bit and I had upgraded it to Windows 7 64-bit last Christmas. It was working fine till last month that I started getting sporadic blank screens. Here is the symptome with details: screen goes blank, backlight it on, but there is no content on screen. At this time the Hard Disk Drive activity light is steady lit. Initially the problem happened intermitently and sometimes it fixed itself after few minutes and screen would come back on, but when it started to happen more often, I started to look for some troubleshooting. Some people suggested that blank screen could be due to bad lid close button being stuck or Windows power management's CPU power being set to 5%. I have tried cleaning the lid button and fixing power management but no luck. Then, I tried re-installing Windows from DVD, screen never went blank till after the first few steps of setup to the point that it says "Extracting Windows Files". At this time I started to think this is a hardware issue. I took out the RAM, I installed it on my MacBook Pro and used it for few days, and I had no problem. I even diagnosed them with Windows Memory Checker in the list of Recovery Options and no problem was detected. So, the next suspecious thing was the video card or display inverter. I tried connecting the laptop to an external monitor to test the screen's inverter, and same thing happened and external monitor went blank. I used Windows Recovery options and left it on that screen over night and nothing happened so I concluded the video card is fine. Next, I had turned off the Wifi and Lan, but nothing seamed to change, so I concluded those are OK as well. My last coclusion was that the hard drive is bad. I took the drive out and coonected it to my Desktop PC and ran disk utiility scan to check for bad sectors and none was detected. So, I thought the drive might be totally broken. I went to local electronics store and bought a brand new HITACHI SATA II drive and installed it. At first same thing happened so I gave up. Since I didn't have the recovery disks, I ordered recovery disks from Toshiba and tried that. Save thing happend and as soon as it started copying files, it blanked out. OK. So this time I ran a different recovery option and formatted the entire hard disk and zeroed out all sectors. That took approximately 3 days to finish for a 500GB brand new hard drive. Seams a long time.After that I could install Windows 7 64-bit from scratch up to the end. However, things got gorry again when I started installing Updates and driver packages. I had read about some problems with ATI drivers and Catalyst software with .NET updates, so I did not install any driver from update site and made sure all .NET updates are installed. I had to install the updates slowly chosing a few at a time. Otherwise same thing would happen. I got stuck to the point that I could not update anything. Windows files seamed to be corrupt and turning on/off Windows Features in controll panel was blank, so I had to re-install again. I did Re-install successfully using the upgrade option. This time I installed .NET updates first before any other updates. Then I started downloading all Toshiba drivers. Aazingly, the laptop worked for few ours without the symptom. I managed to install most of the drivers and updates including Value Added Package, HDD/DVD Rom Patch, Registry Patch, Sound, Modem, Atheros Wireless, and Catalyst. Up till now things were ok. Then I ran Toshiba Hardware update patch, and things got really messed up. Windows never booted again and symptoms showed right after boot tried to load WIndows. I tried recovery options but System restore kept getting errors too and I could not restore any more. Since Windows 7 Install and Windows Vistal recovery to Factory Default from recovery disk did not work, I thought maybe I should try Windows XP. So, I got a hold of my old Windows XP CD-ROM and I took a stab at it. Everything went fine till it started to copy windows files. This time symptom was different. I got one of those XP Blue Screen of deaths saying Hard Drive is bad and I must run chdsk /F. So, I concluded HDD is the problem. Ran CHDSK and no problem. I formated the drive again using DISKPART and the problem still exists. This is a brand new hard drive. What is the problem?

Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop. "A305D" is only partial.
That's quite the problem. How often was it doing this? At some steps in your diagnosing, it seemed to get better, but I wonder if it was actually (temporarily) fixed, or if it didn't occur by chance.
Unfortunately I don't have an answer for you. Normally I'd suggest you get it serviced, but then you'd also be throwing more money at a three year old notebook when clearly you're knowledgeable yourself.
Hopefully someone in the community will have some suggestions. I have noticed that some people shy away from posts with large paragraphs of text. (I'm not saying that's correct, but it happens.) I'd suggest putting some bullet points at the top summarizing. If you feel like doing that, you can edit your message.
Good luck!
- Peter

Unmountable Boot Volume on XP and screen goes blank before repair begins

The XP Windows partition was seemingly working fine until I turned on the laptop this afternoon. Took a minute or so longer to boot than usual and I was prompted when it did load to update Acrobat, which I did and it rebooted. Took longer to boot, perhaps two or three minutes and I received an Unmountable Boot Volume error. I rebooted a few more times, same result. I tried system restore to three previous dates over past ten days and was told after attempted reloading that it had failed and I should try another day. Worried about my data, I went to safe mode to back up C: drive.
The general advice from MS is to use the Windows installation CD to repair the boot sector. With the CD in, Windows will boot and show my normal desktop and files, though will on perhaps the third item to load to memory, the screen goes blank and the loading seems to continue, as I hear sounds though not sure if it is the programs or the repair.
There does seem to be an ability for it to boot, just not maintain it through full load. Any suggestions short of reinstalling windows would be welcomed. Thank you.

I was unistalling some usless programs when my laptop died & when I turned it on I had unmountable boot volume 0x000000ED (the blue screen)
If I hit repair windows it goes to a black screen with the mouse (nothing else)
Now I tried f8 & then did command prompt but after it had gone to the loading files screen it had gone back to the blue screens with unmountable boot volume 0x000000E
I DL windows 7 repair but how do I get it to install when I cant get past the blue screen?
so i decide to repair it my self and then i found this great solution what helps me

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

Cisco IP Phone 7945-G or 7965-G screen goes blank randomly with SCCP firmware 9.2(3) on CUCM 8.6(2a)

Hello everybody,
I have the following situation:
A WAN VoIP network, with centralized call processing model (central site and few branches)
Cisco IP Phones 7945-G and 7965-G running SCCP
Cisco Unified Communications Manager 8.6(2a)
SCCP firmware Release 9.2(3) for the above mentioned hardware models
The problem that occurs randomly is that either when the firmware was SCCP firmware Release 9.2(1), or it was upgraded to SCCP firmware Release 9.2(3), approximately 5 Cisco IP Phones, the screen goes blank, the phone being still operational (but difficult to operate in such circumstances), and the problem persists until it is disconnected from PoE, and re-connected.
Please if possible, any solution to this problem is much appreciated.
Thank you in advance.
Radu

Hello again,
In addition to what I already mentioned, I would like to detail a few aspects, in order to be more specific with this behavior:
-          From the total number of Cisco IP phones which is less than 1000, this behavior happened randomly, within 1 month and 3 weeks
-          Actually, it was a total number of 8 Cisco IP phones whose display went off, 4 being located in Headquarters, and from the other 4, 3 were in the same Branch, and 1 in another Branch
-          Also, 7 IP phones are connected in non-Cisco switches with PoE, and 1 IP Phone was power supplied from AC adapter
-          initially, all existing IP phones had firmware Release 9.2(1) for 7945G and 7965G, and the mentioned behavior happened with 4 IP phones
-          then, for all IP phones, it were upgraded to firmware Release 9.2(3) for 7945G and 7965G, but problem re-appeared with other 4 IP phones
The only solution that solved the issue for each IP phone was to disconnect the power from the IP phones.
I hope that you might help me on how to get solving this problem, and I am looking forward for any useful idea or solution.
Many thanks in advance.
Regards,
Radu

Screen goes blank after a few mins, no matter what I do

I have a slight problem: I ran an update, which brought me a brand-new shiny kernel and a brand-new shiny xorg-server. It took me a few days until I bothered to reboot my computer and after that things got hairy.
After a few minutes, screen goes blank.
I set a screensaver of my Gnome desktop to 2 hours, no effect.
Power manager sliders have exactly to positions: 2 hours 1 minute and never, neither one has any effect on this.
I said 'xset dpms force on', no effect.
Even when I try to watch a movie with mplayer, screen still goes blank after a few minutes (usually mplayer inhibits this kind of stuff).
Now, I find it really hard to believe that this could be any hardware issue, after all, if video card or display would be faulty, I would probably either get a picture on the screen or don't get a picture on the screen, not some unwanted screen suspend every few minutes.
So I have to assume it's a software thing. Kernel doesn't seem very likely to be the guilty one, so I guess it is that steaming pile of crap we know as xorg-server, which got upgrade from 1.6.1 to 1.6.1.901 (sounds like wannabe-1.6.2), to be take the blame here.
There is no 1.6.1 package in the cache or in any repos I checked, so hard to downgrade. Of course I could hack some pkgbuild from AUR and install that, but somebody told me that I would probably also have to compile drivers against that so if that's correct (is it?), then I would consider that as a last option.
Any ideas?

http://bbs.archlinux.org/viewtopic.php?id=70733&p=1

Cant get into BIOS via DEL key, screen goes blank on load RD240

Hello group, having an issue with a RD240 rackmount server attempting to bring it online for the first time. Currently in a one CPU configuration with one stick on RAM in the correct slot, using SAS. When the computer first boots prompting you to hit either DEL or TAB those keyboard commands are non-effective. Once it bypasses that screen it will move towards the LSI connfiguration utility. If you hit Ctrl +C it will say that the utility will become active after initialization. The screen then just goes blank. At that point I can hit Ctrl Alt Delete and it will reboot the server and then in the same mess again, Del is ignored, I can't boot off the CDROM, cleared the BIOS using the jumpers, nada. Any thoughts on this would be great, at this point I can't get in to configure and if I just let it boot always ends in a black screen. Checked the cables for the SAS and everything looks good across the board to me. Tried different RAM sticks, unplugging the SATA CDROM, etc. I can get into the Mgmt via the web and sensor show everything green across the board etc but something is borked. There is a LED screen on the mainboard with the number 78. I couldn't reference what that means. All drives I can hear click on, Cheetah 15k all around. Steady green light on bottom, top light out. Any input would be greatly appreciated!

Try pressing F1 at the Thinkserver Screen. When Setup Bios appears, you can exit out by pressing Esc. After the screen goes blank, press Ctrl+H to get the Web Bios screen which will allow you to configure your server. I hope that this will help.

When I click on my Messages app I can see it for a brief moment and then the screen goes blank

When I click on my Messages app I can see it for a brief moment and then the screen goes blank. This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.

Hello linslaf,
It may help to force close the Messages app, then restart the device.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the next step would be to restore your iiPhone.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

When I click on certain website like youtube the screen goes blank and will to open. What do I need to do?

when I click on certain website like youtube the screen goes blank and will to open. What do I need to do? I really need help

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

When I click on itunes store it displays it for a few seconds and then the screen goes blank?

When I click on the itunes store the info appears for a couple of seconds and then the screen goes blank. I never had this problem before any ideas?

same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

When i open the itunes store, the screen goes blank after 2 seconds so I cant order music

When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?

same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

Macbook screen goes blank depending on its angle?

My macbooks screen goes blank unless it is at a specific angle, is this a cable problem and how much to get repaired?

While it's impossible to diagnose a hardware problem online it is more than likely a bad inverter cable. Go to www.ifixit.com and look up the repair tutorial to see if you'd rather do it yourself.

N80 SCREEN GOES BLANK

Similar Messages

Maybe you are looking for