N80 sms sending problems

I have an unlocked N80, up until the other day I could send & recieve sms messages but they were very slow. I installed sms accelerator & it worked fine but then the service centre number afterwards was incorrect. I edited the number back to my original sms service centre number in the settings but now I can't send txt messages at all, I can't get into the sms settings at all either! I can send mms & picture messages, email & I can recieve sms. It's driving me crazy, please help. thanks

Hi, many thanks for your response, however I've done the firmware upgrade & SMS sccelerator but STILL can't send TXT messages!!! I can't get into SMS "settings" to configure my service centre number.
I can access MMS & wap/email etc fine, I can send & recieve MMS. I am confused over this whole issue!!

Similar Messages

SMS sending problem

Hi all,
I am new in J2ME and i have this problem, I make application wich must send an sms message ,it works properly on emuliator, but on the phone application closes just after ckicking "send" command. on send command must make MessageConnection, get a number, get message from textfields and with function send(TextMessage); send.
I'v catch all exceptions, specify permissions. and I have not eny message form phone on instalations.
sorry about my english and thank you for your replays.

Hi supareno I have same problem and if you may I send you code
public void run() {
String address = destinationAddress;
MessageConnection smsconn = null;
try {
smsconn = (MessageConnection) Connector.open(address);
TextMessage txtmessage = (TextMessage) smsconn.newMessage(
MessageConnection.TEXT_MESSAGE);
txtmessage.setAddress(address);
txtmessage.setPayloadText(messageBox.getString());
smsconn.send(txtmessage);
} catch (Throwable t) {
System.out.println("Send caught: ");
t.printStackTrace();
if (smsconn != null) {
try {
smsconn.close();
} catch (IOException ioe) {
System.out.println("Closing connection caught: ");
ioe.printStackTrace();
I must say that I dont spacify a port number, I thougth in this case it must be a ordinary sms.
thank you.

Nokia n80 cannot send or receive sms..

my nokia n80 cannot send or receive sms... it can send messages to the network operator(globe) but when i try sending a message to anyone in my phonebook, it says in the outbox: "resend in..(a few minutes after i press the send button)" please help me.. its my first time to encounter this problem.. sorry if my english is bad.. thank you.

Don't use ALL CAPS on post, online means you are SHOUTING and is very RUDE.
SMS is a carrier service, talk to your carrier.

How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

Nokia N80 SLOW SMS SEND

Why oh why does it take my N80 on a pay as you go contract so long to send a message?? I am a pay as you go O2 customer. But its not the network cos i have a 6670 which works fine and sends quick SMS with same sim.

Hiya
Have you installed the Nokia N80 SMS Accelerator?
That should help
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Code to automatically sms send and receive by sql server

I want you to tell me the necessary code in vb and sql to automatically send and receive sms from sql database.i know only that i have to create one table for it in the database.please anybody who knows post the code for me.

Hi mintesnot h.benti,
According to your description, since the issue regards VB code, as other post, you need to post the related problem on Visual Basic forum at
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral. It is appropriate and more experts will assist you.
In addition, if you want to use a SQL Server database, and it makes SMS sending and receiving possible through database tables in your VB.NET application. You may need to use the 3<sup>rd</sup> tools, such as OZEKI NG SMS Gateway or others.
http://www.ozekisms.com/php-sms-api-asp-sms-A/index.php?owpn=586&sms_gateway=sms_VB.NET_database_sms_example_guide
Note: Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality,
safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and please be cautious and ensure you have completely understood the risk before retrieving any software from the
Internet.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How to set up sms sending on yosemite if my country (Kyrgyzstan) is not in the list of supported countries? thanks

how to set up sms sending on yosemite if my country (Kyrgyzstan) is not in the list of supported countries? thanks

hello guys, i live in lebanon too and i was so frustrated by this. however i found the solution. when setting up icloud keychain, before creating a password for the keychain press on advanced options and choose not to create a password. you will ahve to use your account password to activate keychain on other device. this will bypass the sms confirmation

Rfc sender problem(sap r/3 -se37) 'alternativeServiceIdentifier: party/serv

Rfc sender problem: While executing the rfc in sap r/3 system
It is showing abap run time errors are
'alternativeServiceIdentifier: party/service from channel
configuration are not
(i have taken hint from this weblog /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step)
These are the configuration at sap xi and sap r/3 system
1) SAP XI (ID)
I have created rfc sender commuication channel in I.D.
      Rfc server Parameters->
            A.S.(Gateway)-> server    {sap r/3 server name}
            A.S.S.(Gateway) -> sapgw00
            program id         -> PDPT
     AND RFC Metadata repository parameter
2)SAP R/3 (SM59)
    Rfc destination -> PPPP
    Connection type -> T
    Technical Settings->
         (*) Registered Server Program
      Program ID ->    PDPT
Gate way options
      Gateway host -> server
      gateway service -> sapgw00
Testconnection-> connected
3) testing rfc at sap r/3(se37)
But when i am executing a rfc in sap system
Rfc target system -> PPPP
and some import parameters
and it is showing the error message as
'alternativeServiceIdentifier: party/service from channel
configuration are not '
4)SAP R/3( SMGW)
CONNECTION TO CLIENT FOR PDPT(TP NAME) REGISTER STATUS IS WAITING
Please help me how to solve this problem

Hi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek

A new clue to the Apple Mail sending problems?

In my continuing efforts to fix the SMTP/POP mail failures with Apple mail, I've noticed a glitch that some of you more advanced readers might be able to decipher.
After lots of fruitless messing around with port numbers, preferences, and keychain fix attempts, what did work for me (temporarily) was a cleaning out of all the servers listed on the mail account options window, and then putting the original names and other info back in. Somehow, the mail app is spontaneously generating multiple combinations of server names, usually the original server name, plus a user name, the server name again, or some other redundant combination.
As I use mail to manage two separate POP accounts, sometimes it also creates hybrid server names by combining the server/user name pieces across both accounts.
This appears to happen entirely on its own; I had mail working for about 90 minutes, then it fell into this problem again. I'll probably have to keep cleaning it out, like a boat owner scraping barnacles off the hull, until Apple offers some kind of a patch.
Has anyone else who has the nagging "can't send SMTP mail" problem seen this phenomenon in their server/account preferences specs? If so, any ideas on how to stop this madness?

You haven’t said what the problem was in your case, i.e. what error message did you get when sending, if any, whether the mail account and the associated outgoing (SMTP) server were provided by your ISP or by someone else, etc.
Mail doesn’t spontaneoulsy generate outgoing server entries, but it keeps information about outgoing (SMTP) servers in a separate list independently of the mail accounts themselves. The account settings just associate one of the available outgoing servers with each account. Deleting an account doesn’t remove from the list the outgoing server that was associated with it. Orphaned or dangling outgoing server entries (i.e. not associated with any account) sometimes cause weird sending problems, and could very well have been the problem in your case as well.
As you appear to have already found out, you may go to Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP), choose Edit Server List from the popup menu, and delete any servers that shouldn’t be there — the Edit Server List panel shows the account each outgoing server is associated with.

Name of sms sender not appearing

Hi,
I would like to ask why is that the name of the sms sender doesn't appear on my X6 even though the sender name and number is already in my contact list?
Regards,
micosdeque

hadimassa wrote:
micosdeque wrote:
Hi,
I would like to ask why is that the name of the sms sender doesn't appear on my X6 even though the sender name and number is already in my contact list?
Regards,
micosdeque
Check for duplicates in the phonebook.
I have a N8 .I have recently updated the software and Back up the data. The SMS in my inbox are not showing the sender name. Its just showing the no's of the sender. Please help fix it.

Parallels xp unable to send problem report?

Parallels desktop 7
I have old version of XP, parallels does not detect (virtual machine is not available) when I locate, set up.exe is grey
I am unable to send problem report? please check network settings and try again, my network settings are working, I'm sendint this thread?? emails sending and recieving, any help would be really appreciated
Tks
Gary

You ain't gonna believe this but:
In 2006 I tried half heartedly to set up parallels and just took a look at a response I got, it suggested.
There's a bug in the Apple firmware in the Mac Pro that prevents the hardware virtualization support that's built into the processor from being used. Since you will be running a VM (Virtual Machine) to install your guest OS, hardware virtualization support will let your VM run directly on the processor hardware. Without Vt-X support, software emulation is required, which is many times slower.
Sometimes, putting your Mac to sleep and waking it up will allow getting around the Apple bug and allow Vt-X to work, speeding up your VM.
Well I just put mine to sleep and the bloody thing downloaded perfectly, go figure.
Shootist, you were perfectly correct, I was just frustrated and was trying anything.
Actually Tempelton, I put it here and parallels because I think it's a combo problem, but, thanks for your help anyway mate. Also, I do like a little Robert Johnson matter of fact the Blues Bros were real good at sweet home chicago too
Thanks all

Mail locked up because of sending problem. How do I stop the send function?

Mail locked up because of sending problem. How do I stop the send function?

Didn't help. Wound up talking to A Support & deleting the cache in my Library Mail file then restarting. Thanks anyway.

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

How to completely uninstall SMS sender?

I have installed a software called SMS sender of MacMedia company from App store. From then on, App store always notice me to upgrage this software, but in fact I have already upgraded it to the latest version. Even when I uninstall this SMS sender. App store still notice me to upgrade.
Somebody can help me?

I presume you only take the computer in for your own security. Why not leave it with your mobile phone, iPod, etc? I would think these other devices are also banned and that no employee is allowed those either.
My mind actually boggles at the implications if they are truly serious about this!
If of course your computer contains whatever it is that you are trying to sell make hard copies & carry them in or burn cd's/dvd's in a format they can run on their own computers. You could use memory sticks too.
Neville

N80 sms sending problems

Similar Messages

Maybe you are looking for