N86 E: Mass memory corrupted - how to recover?"

Hi,
I'm using a N86 8MP which is less than 5 months old. Recently, I have lost all my music files and all the crucial photo images which I have taken between Jan till now and I have not done a backup yet. Somehow this occurs after I have switched the Singapore SIM Card to a China Prepaid Card. Could it be the cause of data losses? Also, not sure if the missing data has anything to do with the corrupted E:Mass Memory which I have just discovered yesterday.. Any ideas/advise?
And, may I know, how can I recover the corrupted E:Mass Memory from my Nokia N86 8MP phone?
Please help. Thanks!

Thanks for the suggestion, Barney-15E. FYI I am not running both iCal and Calendar. Just Calendar. Me bad for using the old name and new name interchangeably.
Tackling the iMac problem: In iCloud network preferences, I unchecked Safari then soon after rechecked it, and your suggestion appears to have worked: a bookmark recently added on one of the other devices appeared in the iMac Safari bookmarks. So far so good.
Did the same thing with contacts. The iMac took a couple of hours to restore the sync setting, but it finally completed the task. The computer was laboring so I rebooted. Then I opened the contacts application and saw the spinning grey bars next to the "iCloud" heading above my list of contact groups. Some time later the spinning lines were replaced by an exclamation point. I clicked on it and got the message that the operation could not be completed because of a "CoreDAVErrorDomain error 1..". Subsequently, after much spinning of the line wheel, I have gotten either the exclamation point with the CoreDAV message or a lightning bolt icon. Whether exclamation point or lightning bolt, clicking on it provokes a long period of the spinning line wheel. And looking at some telltale contact discrepancies between the iMac and the other machines, nothing seems to have changed in terms of merging the discrepancies.
Searching for the error message in the support community, I see this has happened to others, and they have had some success in following a list of steps starting with archiving the contacts, which I have done. Don't think I fully follow the other steps, nor am I sure they apply to my situation.

Similar Messages

  • Etc/system file corrupted how to recover it?

    etc/system file corrupted how to recover it?

    with boot -a you can only specify new /etc/system during boot , e.g. /dev/null
    but if you want to recover it , you can do it from live kernel ( if you didn't reboot after /etc/system was corrupted )
    with
    echo ::system|mdb -k
    or from previous crash dump simmilar way
    cd /var/crash/`uname -n`
    cho ::system|mdb unix.[x] vmcore.[y]

  • Sysjobhistory table corrupted how to recover on sql 2008 r2

    sysjobhistory table corrupted how to recover ron sql 2008 r2

    Is it anything related to Master Data Services or just a generic question for SQL Server Agent?
    I guess its generic question and must be moved to database engine forum
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • PDF files corrupted, how to recover them?

    I am using ubuntu 11.04. Few days ago, I installed wine to run .exe programs on the system. Somehow .exe virus flooded into the system & the entire system has got corrupted. Now I am unable to view pdf files as all of them are corrupted. How can recover them now?

    Some viruses destroy all PDF (and other types of file) on the system. If this is the case, they are gone, and you need to restore from backup.

  • N96 Mass Memory corrupted -- Help!!

    Hello, the other day without any other trouble I discovered that my mass memory is corrupted.. I tried to make a picture and phone told me this.. I even tried to format memory, but unsuccessful as system says that is used by another application!.. Could anyone help?
    Thanks

    have you tried to restart the device and then try again to format the card?
    you can also put the card to a card reader on your pc, format it, and then put it back to the phone and format it again.
    a pc will format the card no matter what. you just have to reformat it after you put it on the phone.
    Greece Nokia X6 RM-559 v40.0.002

  • Bios is corrupt , how to recover

    bios is corrupt , how to recover

    Hey there,
    Can you give me some more information? I will need to know the specific model number of your computer, the operating system you are using, and any other relative information.
    Thanks,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Photos did not download and I deleted them from memory card. how to recover?

    Photos did not download to computer.  I deleted them from memory card.  Is there a way to retrieve them from memory card.

    If all you did was delete them it should be relatively easy to recover them BUT don't use the card until you've done it. Even after a format it's fairly easy but not after re use because you write over them. For more help read the replies here.
    http://forums.usa.canon.com/t5/PowerShot/How-do-I-recover-photos-deleted-from-the-memory-card/m-p/84...
    You will need a card reader because I don't think it can be done in camera using the usb cable.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • One control file corrupted, how to recover?

    The first control file get corrupted, and the db can't start up. The second and third are ok. How can I recover the first control file and bring the db up?
    Thanks

    but still not up:
    SQL> startup
    ORACLE instance started.
    Total System Global Area 830472192 bytes
    Fixed Size 2032520 bytes
    Variable Size 746593400 bytes
    Database Buffers 75497472 bytes
    Redo Buffers 6348800 bytes
    Database mounted.
    ORA-03113: end-of-file on communication channel
    from alert:
    Errors in file /opt/oracle/admin/pacedev5/bdump/pacedev5_lgwr_14488.trc:
    ORA-19502: write error on file "/opt/oracle/u01/pacedev5/control01.ctl", blockno 297 (blocksize=16384)
    ORA-27063: number of bytes read/written is incorrect
    Additional information: 24576
    Additional information: 196608
    LGWR: terminating instance due to error 19502
    Instance terminated by LGWR, pid = 14488
    dbv the control file and see the corrupted blocks
    something else could be wrong?
    thanks

  • My iMac HD got corrupted how to recover data?

    My iMac HD got corrupted and had to clean format it. Any freeware applications to recover all the data? Specially Documents and images?
    I am in deep trouble and need to recover the files soon..
    I cannot afford paid softwares right now.

    There is no FREE data recovery software.
    AND data recovery services are not free either.
    If you do not have a backup of your important data and/or system, you are out of luck.
    If you can' t afford to purchase any data recovery software I don't suppose you can afford an external hard drive, either?
    WIth an external hard drive, you could install OS X and run your Mac from the external hard drive and not use the internal drIve, at all, until you can afford to buy the data recovery software that you will need.
    Other than what I have covered here, you have ran out of luck.
    Sorry

  • N95 8GB v20.0.016 - mass memory failure #3

    For the third time my N95 8GB has managed to corrupt its mass memory ("mass memory corrupted") - only this time, I am unable to reformat it at all!
    The problem behaviour is as follows:
    Used the phone last night to take several pictures, accessing the Gallery at one stage to find and delete one picture. This afternoon I look for the photos to review, and the '200902' folder (images for February) on the mass memory has no subfolder and is empty. However, I DO have a video saved on the phone from the 7th of February!
    This afternoon I am able to take as many pictures as I like and they are saved correctly in the gallery and the 200902 folder. I had used about 5.2GB of the mass memory at this point. (It may be worth noting that I would occasionally get the message 'Gallery: Memory full' whilst browsing the gallery, but never at any other time).
    At this stage, the mass memory is still fully populated, so I thought it would be best to cut my losses and take a full phone backup. The backup process fails, with an error along the lines of having lost connection with the phone.
    I check file manager to see what's going on, and the following message appears on the memory card page: "(no data)".
    All previous times the handset corrupted its memory, the trigger seemed to be a reboot of the handset. (Contents were lost upon returning to File Manager after a reboot). Having not rebooted the phone at all in the last 24 hours, I was surprised that the memory card contents had apparently disappeared without any application being launched and apparently no new data writing attempts being made. Perhaps the read operation for the backup caused the failure? But this still does not explain how all my February photos were deleted.
    Without any obvious way of getting to my files, I rebooted the phone, returned to file manager and was greeted by the familiar: "(mass memory corrupted)".
    As mentioned previously, when this happened before I was able to format the memory via Menu -> Tools -> Utilities -> Memory -> Format. This time, I receive the message: "Mass memory is in use by other application. Continue anyway?". I select 'Yes' - but the handset simply returns to the memory screen and "(mass memory corrupted)". This still happens even after a reboot.
    I have performed 'Factory settings' reset via the phone menus, a 'hard reset' via code *#7370#, a format by holding *, 3 and the call answer button whilst powering on the phone - none of these prevent the 'Mass memory is in use' error from occurring. I have also attempted to format drive E (mass memory) but this just returns an error code. When I attempt to upgrade the firmware, the process fails every time after ~3 minutes saying that the connection with the phone has been lost (the warnings about upgrading do state that the mass memory should NOT be encrypted, so I presume that it being inaccessible is equivalent to this).
    I cannot see any way to format the 8gb memory so that I can make it usable once more! The phone was not dropped or damaged in any way in the last 24 hours, yet it seems that something must have physically changed inside it?
    The only parallel I can draw between this incident and the previous one is that both times, the memory was around 2/3rds full (around 5.5GB). I am wondering if perhaps the FAT table outgrows itself and dies?
    My 1 year warranty expired 3 weeks ago - I am hopeful my network operator will be able to provide a replacement and that this phone just has a 'bad' memory chip - it really is a superb phone barring this infuriating corruption problem mine seems to have!
    If anyone could shed any light on a solution it would be much appreciated
    Thanks,
    Alex
    Message Edited by dazz19 on 15-Feb-2009 11:43 AM

    In the end my operator agreed to replace the handset for me after a lot of to-ing and fro-ing. In my opinion the problem was caused by a faulty memory chip.
    Alex
    p.s. - the old handset was sent to the operator for repair and they were unable to repair it, only offer a refurbished replacement. With the greatest of respect, it's good to know my case is not unique!
    Message Edited by psx9 on 12-May-2009 01:10 AM

  • How to recover Excel lost file?

    I mistakenly deleted an Excel 2013 work file.
    Any suggestions for recovering this file?
    I would be appreciated.

    How to solve some troubles with excel files you may learn from-
    http://www.filerepairforum.com/forum/microsoft/microsoft-aa/excel/481-%E2%80%8Bexcel-files-corrupted
    How to Recover an Excel File for Free
    Check the Recycle Bin--if you've accidentally deleted the file, it should still be there unless you've emptied the bin, and you can click on the file and
    recover it.
    Use the Auto Recovery Pane when you open Excel. Review the document recovery pane. If Excel has managed to recover your file, it will show in a separate
    pane on the left-hand side. Identify your document in the pane, then click on it and choose "Open" to open the recovered file.
    Try manually repairing the file. Click on "File" in Excel 2003 or the "Office" button in
    Excel 2007, then select "Open" and click on the arrow next to the "Open" button. Click on
    "Open and Repair" and choose from two options: click on "Repair" if you want to try to completely recover the file, or click on "Extract
    Data" if you previously tried Step 1 and it did not work.
    Search for the file manually on your computer. When performing a system search (click "Start" and select "Search" in Windows XP and
    Windows 2000, or press the "Windows" button and "F" key in Windows 7 and Vista), make sure you choose "Advanced Search Options" and then check the "System and hidden files" check box. You may be able to find your missing
    or corrupted file using this search: double-click on the file name in the search results to open it.
    If nothing can help you, look at
    Excel Repair Toolbox
    As a solution, it costs money, but effective-
    http://www.excelrepairtoolbox.com/

  • Mass Memory's proplem

    My n97 is unable to switch on because of problem in mass memory. How can I do?

    @sourssarann
    Although it would delete all user data, I could only think of carrying out a "hard reset" upon device and then perhaps it would start but mass memory be unavailable if fault lies there.
    Happy to have helped forum with a Support Ratio = 42.5

  • N86 8MP : How to recover Photos from corrupted E: ...

    Hi,
    I'm using a N86 8MP which is less than 5 months old. Recently, I have lost all my music files and all the crucial photo images which I have taken between Jan till now and I have not done a backup yet. Somehow this occurs after I have switched the Singapore SIM Card to a China Prepaid Card. Could it be the cause of data losses? Also, not sure if the missing data has anything to do with the corrupted E:Mass Memory which I have just discovered.. Any ideas/advise?
    And, may I know, how can I recover all the Photos from the corrupted E:Mass Memory?
    Please help. Thanks!

    I met this kind of problem before with the corrupted SD card on my Samsung phone but it came out I got nothing from the card as the corrupted card can not be recognised by the computer when connected. So I hope you are lucky. (your card can be detected,)
    First, take the card from the phone (powered off) and if it has a "write protect" tab then lock it now. Do not try and write anything to the card or you risk causing more problems. You can either plug in you camera to the PC as it should appear as a “Removable Drive” or put the card in a card reader attached to your PC.
    Next, if you are comfortable with using a PC then you can download a photo recovery utility that will recover your photos from the following link:
    http://www.cgsecurity.org/wiki/TestDisk_Download (Windows, freeware)
    http://www.apple.com/downloads/macosx/system_disk_utilities/photorecovery.html (for Mac OS X shareware)
    If such free utilities fail to help, you may rely on some paid photo recovery software. If you search the web for photo recovery software you will find many. One I have tried successfully is Wondershare Photo Recovery 2.1 that used to be bundled with some other products. This program can also recover music and videos. Now you can get it from the link below:
    http://www.wondershare.com/pro/photo-recovery.html
    You can try the demo to see what you can recover before buying.
    Remember - Do NOT try & write anything back to the card until you can recover your pictures and music to your PC safely! Merry Christmas

  • Nokia N8, how do i save messages to mass memory/me...

    cant seem to find an option on my N8 as to where i can save my received texts. used to be in messaging----options----settings----text message or other.    checked both of them and cant find an option to save them to alternative memory???? anyone help????

    I'd like to know how to do the same, to save to mass memory or memory card,
    Check attached snapshot of phone memory details.
    Nothing is as it seems
    If I've helped , click the Star under my name
    Attachments:
    Scr000005.jpg ‏23 KB

  • Corrupted innodb table crashing mysql instance how to recover table?

    Hello,
    Running a simple query against corrupted innodb table is crashing mysql instance .
    table test.xyz got corrupt during crash and truncate table command was in progressing when mysql crash , now
    running a simple select * query is also crashing db .
    mysql> use test;
    Database changed
    mysql> select * from xyz;
    ERROR 2013 (HY000): Lost connection to MySQL server during query
    mysql>
    mysql>
    mysql> select * from xzy;
    ERROR 2006 (HY000): MySQL server has gone away
    No connection. Trying to reconnect...
    ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
    ERROR:
    Can't connect to the server

    Try to start mysql with innodb_force_recovery = 6
    Or to try to restore by means of the tool:
    MySql Recovery Toolbox and find out how you can use the corrupt MySQL recovery tool for damaged database restoration and easily repair known issues or already known problems, occurred in MySql files. This MySql repair utility offers many benefits
    like:
    Supports all MySql file versions and parses even very large documents on older PC computers;
    Supports primary and external keys, tables, views, indexes and other objects;
    Allows previewing recovered data in freeware mode so you can get results without purchasing MySql Recovery Toolbox
    For more information: http://www.mysqlrecoverytoolbox.com/
    As you can look for the answer here:
    http://www.filerepairforum.com/forum/databases/databases-aa/mysql/197-corrupted-innodb-table-crashing-mysql-instance-how-to-recover-table

Maybe you are looking for

  • Apple tv2: No sound

    Hello, I connected the hdmi cable directly to hdmi 2 on my tv and got now sound at all.  I am trying to connect it directly to my receiver now and I can't even get Apple tv recognized by the system at ths point.  I had one open hdmi port open on the

  • Too much "stuff" to install Leopard

    I've backup my iPhoto Library & iTunes library to external HD. Now I delete both from my HD? Then after Leopard is installed, I drag both of them from the external HD to MacBook Pro HD? Just being extra cautious!

  • Cannot see Timecapsule in Airport Utility on Windows XP

    Just purchased a 2T TC and can connect MBP and Macbook air ok. I also have a Lenovo laptop with Windows XP that uses TC for internet access that works ok. When I run Airport Utility (v5.5.3) on Windows XP it cannot see the TC. I have Bonjour Printer

  • A case of RAC

    Hi all, If I have a 2 node RAc database with 23 cpu cores=46 NUM_CPUs from AWR, then i have a total of 82800s of CPU time. Now as there are two nodes,to calculate total CPU usage, do we have to calculate CPU usage of each node and add them? Does each

  • JLZZ_AR_TX_FISCAL_CLASS_CODE

    Hi, I need information about the route to reach te lookup code: JLZZ_AR_TX_FISCAL_CLASS_CODE thanks!!