N9 disconnect account btw internet connections (3g...

My N9 losses account setting (user/password) when ever it losses internet connection.
please help me remedy this problem.
Thanks!

Mine forgot all my passwords few days back, I re-installed firmware using Nokia software updater. I didn't charge immediately after phone battery went dead, when I charged it phone wouldn't connect to any of online services. First try 'Restore settings' under settings > Reset. Go for firmware re-install if that didn't work. Good luck.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

Itunes hangs on disconnect / reconnect of internet connection

Quite often I do stream internet radio stations using Itunes. I am listening through my BeoCenter2. When I swich of the BeoCenter2, I often forget to
stop the stream in Itunes. This would not a problem, but because my internet provider drops the connection every night for one second.
This disconnect / reconnect is not handled by Itunes correctely. From this moment on Itunes is frozen and hangs. Itunes has to be killed.
Any advice? Or is there a bug fix on the way?

Hi,
Thanks for that - good advice I'll file a report.
I've just switched to streaming music this way after struggling for many years with a Logitech Duet. When it worked it was brilliant, but very flaky at times. Naively I thought I would switch to something totally reliable and sorted. To be fair the remote app works brilliantly on iphone and no problem with streaming my music collection - just that, like you, I stream radio feeds too. I cannot believe others don't have the same problem too. My internet connection drops out several times a day, which I'm pursuing as well.
If/when I make progress I'll post it.

HP Officejet Pro 8000 A809 continues to disconnect my wireless internet connection

My router is a Netgear WNDR3400 v2
My Desktop is running Windows XP Pro
My laptop is running Windows 7 Home
Ever since I turned on the wireless function of the printer, I intermittently lose my internet connection, both wired(ethernet) and wireless. Do I need to change the IP Address Configuration to Manual IP and enter a static address like 192.168.1.50?
The printer works fine when connected, but, I can't figure out why I have always reboot the router to get reconnected.
I would appreciate any help

Hi Ciara, I had to remove one of the printheads on the right side in order to clean it manualy. After running 2 cycles of printhead cleaning, the print quality diagnostic page was still showing streaks.....in fact, the streaks were getting worse. The carriage wouldn't move the way it was supposed to (according to the manual) so I had to access them from the right side. This is probably when the belt broke. I found the other half of the belt. My brother-in-law told me that the hook and belt assembly are there to hold up the wires while the carriage moves. I can see now how the wires cause the carriage not to move. My printer needs a new belt for this assembly, and/or I need a photo as to how the assembly is supposed to look when the belt is intact. I might be able to rig up something with a twist-tie or some other strap, but I need to see how to wrap it around the wires and hook so that the hook moves freely, holding up the wires so that they don't catch on the back of the carriage when it starts to move toward the left.

Setting up itunes account without internet connection

I wanted to set up my itunes account, but I do not have internet access for my home computer.
Can I set up my account on a computer that is not my own?
Would this cause trouble with syncing my iphone with my own computer?

Rocky,
You are right, and I apologize, I misunderstood the OPs question.
Actually if you simply setup your network, but do not connect a cable to the internet, then you have your insulated network. As I understand it, with this setup the amber may still be flashing because it detects that you are not connected to the internet. But that won't prevent your local wireless network from working.
To do this click "Internet" in the tool bar of the Airport Utility --> At bottom select Off (Bridge Mode)" beside "Connection Sharing".
Let me know if this helps.

Internet connection (sometimes) slow to come back after wake up

Hi all,
I started having a strange problem few days ago. First time it happened my husband gave the iBook back to me after using it, and I logged into my user account - and internet connection was gone. I checked the airport settings, the bars were there - went and checked internet connection from the other computer and it was ok. Rebooted, twice, fiddled with the internet connections - and suddenly, without changing anything, the connection was back.
So I though it was weird, but since my iBook has been fine since I got it 7 months ago I didn't think more of it. Then it happens again - this time I opened it up from sleep, and again no internet connection, couldn't even contact the router although bars were there and it claimed that it was connected to the network. This time I didn't even change the settings, but just looked at them, and after 5 minutes or so the connection came back. Then it happened again, same symptoms and same solution - wait for 5 minutes and it will sort itself out. But of course it doesn't happen every time - yesterday it was fine.
Anyone has any ideas what's going on, and possibly even solve the issue?
Any help would be appreciated.
12" iBook G4 Mac OS X (10.4.3)

Hi.
Sorry that the simple fix doesn't do it. There are other things you can try, since WiFi can be cranky in many ways. First, are you running an Airport base station or some other wireless router? If it is "other", then you might try changing the broadcast channel on it. WiFi operates on 11 different channels in the 2.4 MHz band, and you might get more reliable connections on a different channel.
The Airport base station is smart enough to switch itself to the best channel, but you may have to do your own adjustments with other routers. Most use channel 6 by default; if you are in a neighborhood with lots of other WiFi access points around all running on channel 6, you can get significant interference. Try switching to channel 1 or channel 11. Other devices in the 2.4MHz band can also be a problem: garage door openers, cordless phones, or baby monitors.
Note your own router could have strong signal, but it would be fighting all the other signals coming in. If you are in an apartment building or in a block of houses fairly close together, such noise could be an issue. My neighbor was having WiFi connection outages, and it turned out that he had five detectable signals from his neighbors, all but one running on channel 6 along with him (I was on channel 3).
The location of your router can also be important. According to experts on the web, it is better to have your base station higher than your iBook. My neighbor had another strike against him when he put his base station into the basement while he tried to work in the bedroom above with a laptop.
Anyway, there are many things that can go wrong. You may indeed have a hardware problem, but let's rule some more easily fixable problems first.
Good luck.

Internet disconnects when trying to connect a vpn on a different user account on the same computer

Im trying to have one user account with my real ip address and another user account on windows 8 with a vpn connection. Everytime i switch (i dont logout i just lock the user) then try to connect a vpn on the other user account the internet disconnects
on the other user account. It's like it wants to change my entire internet connection to use the vpn instead of having a seperate connection on each user account. is there a way around this or am i stuck having to use two laptops? I also unchecked
Use default gateway on remote network on the vpn.

Hi,
Try to temporary disable firewall to see if the same issue occurs.
Leo Huang
TechNet Community Support
This is definitely not the answer. Why is it marked as the answer?

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate. iPad 2, iOS 8.3

This is an ongoing problem as you will see by searching the forum.
Out of curiosity, do you have 2 step verification enabled? It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

HT202667 I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

Hi adamsfly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you changed your email address and iCloud is looking to sign in with the old Apple ID email. I would recommend that you read this article, it may be able to help the issue.
What to do after you change your Apple ID email address or password - Apple Support
Cheers,
Mario

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

I bought elements 13 and downloaded it , but when asked to sign into my adobe account as requested at initial set up of elements 13 , I know my correct password etc and i have a good internet connection But nothing happens even if i wait an hour or so. An

i bought elements 13 and downloaded it , but when asked to sign into my adobe account as requested at initial set up of elements 13 , I know my correct password etc and i have a good internet connection But nothing happens even if i wait an hour or so. Any help would be appreciated.

Hi Michael,
Thanks for posting on the Adobe forums.
Please follow these steps :
Go to following location:
for Win
C:\Program Files (x86)\Common Files\Adobe
C:\Users\username\AppData\Local\Adobe
for MAC
Finder> Go > Go to Folder
\Library\Applicaiton Support\Adobe
~\Library\Applicaiton Support\Adobe
Locate folder OOBE and rename it OOBE.old
Download and install�
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
After the installation
Try to Open Adobe Application Manager / Creative Cloud App.
Log in that with Adobe ID and Password.
If it does not work first try couple of times more.
Let me know if this resolves the issue.
Regards,
Sandeep

N97 The internet connection would not disconnect a...

Dear guys,
I have another issue of N97.
The internet connection would not disconnect after the application is closed.
eg. OVI, internet browser, MAP, opera and all application is require internet access.
Anyone have the same issue as me or solution on this matter ?
Best regards
Anderson

a network operator issue might prevent the 'E' from disappearing even after the connection is closed, i had this issue a few months back, i was on vodafone back then. In my case, the connection would close but the 'E' won't disappear. I'm on Telenor now, and i don't have this issue no more. To confirm, check SETTINGS/CONNECTIVITY/CONNECTION MANAGER,
next, go to SETTINGS/CONNECTIVITY/ADMIN SETTINGS/PACKET DATA and make sure WHEN NEEDED is selected under PACKET DATA CONNECTION,
Next, make sure you don't have auto update enabled for home screen widgets.
Press and hold the red key for a while, this will force close active packet data connections.
Laugh, and the world laughs with you. Cry, and the world laughs louder :-)

Photosmart 7520 disconnects internet connection

I recently bought a Photosmart 7520 all-in-one which is connected to my home wi-fi. It works fine except for one very annoying thing. If I print something, leave the printer on and walk away, when I come back a while later my Mac has disconnected from the Internet. Then I have to restart my Mac in order to regain access. I can get around this problem by turning the printer off when I am through printing but that means I have to turn it on every time I want to print something - and then it goes through its start procedure which, I suspect, is not good for the unit. As the printer sits right next to my Mac, I would be quite happy to just connect it via a USB port but I have not been able to figure out how to transition it off my wi-fi connection to an old fashioned cable hook-up. Alternatively, I'm also happy to use the Wi-Fi connection if I can leave the printer on without disrupting my overall system.
This question was solved.
View Solution.

Hi @carmeljacques2
I would be happy to help you with maintain your internet connection. If you want to simply connect a USB cable, proceed with the following steps;
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Connect the USB cable from the printer to the Mac.
Resetting the printing system will delete the wireless driver the mac is communicating to, and connecting the USB cable will add the USB driver.
If you prefer to keep the wireless connection, we will have to troubleshoot the issue to determine the root cause, and then work towards a solution. If you do indeed want to proceed with the wireless troubleshooting, please let me know if you at any point setup a static/ manual IP address for the printer.
Keep me posted
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Admin user account won't connect to internet - but guest will.

I'm having a very strange problem with my imac. When I am signed in using my normal admin account, the internet won't work. Or if it does it is brutally slow. And as long as I have the my computer plugged into the internet... whether it be ethernet or wifi, no one else in my house can connect to the internet either, or it's brutally slow as well. The second I unplug the ethernet cable from the back of my computer, everyone else's computer on my home network works perfectly.
The only way I can avoid this problem is to sign on to my imac with the guest account, in which case the internet works fine on my computer and everyone else's. Does anyone know how to fix this? I really don't want to just start using the guest account... I am a photographer and all my info, apps, etc. I use for my business are in my normal admin account. Any help will be much appreciated. Thanks, Beverly
I am running Lion 10.8.5

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls *.{crash,hang,panic} | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

13" MBP internet connection gets disconnected when too many wifi connection's available

I just notice this a couple of nights ago... Im using a 13" MBP I bought last June 9. At night, when there are plenty of wifi connections being broadcast in our condominium bldg, my internet connection is very slow. Also, the signal strength is reduced to half. Sometimes I even get disconnected and the MBP wifi has difficulty reconnecting my wifi. But when morning comes, signal strength is at full. I ask my friend who also connects to the same wifi if ever he has difficulty connecting at night, but unfortunately its just me. He is using windows, by the way. I'm wondering if this is a known issue and have a fix already? or it's just me?
Please help... Thanks.

I use my 15" MBP this way with no problems at all and I have Mountain Lion installed. So we need to look elsewhere for the problem, it's not possible to link this to the OS without further investigation (but it could be a system setting).
I know that other folks are complaining that Mountain Lion broke WIFI. But if that were the case we would all have problems. I, along with many others, have no problems at all. I think there is something else going on.
What is the signal strength with the lid open vs. closed?
When you say that Safari does not work, are you getting a timeout message or a message like "You are not connected to the Internet."? Of course this is the English version of the message, yours will be different.

N9 disconnect account btw internet connections (3g...

Similar Messages

Maybe you are looking for