N900 - "public user name" in sip settings!

on symbian n95/n82 phones: sip settings: there is a field "public user name".
the info there is what the caller id sends to the receiver of the call.
so i had "sip:[email protected]" (nonoh is my voip service and my mobile is
registered with them) and the receiver of my calls sees my mobile # calling ...
not private #, or a strange # that he/she would not care to call back ...
how can i add this to my settings
i tried to play with accounts.cfg
in
/home/user/.rtcom-accounts/
but with no effect
please help!!
thank u!

anyone can help?
thank you!!

Similar Messages

Bad public user name

Hi,
I installed P621 on windows 7 and database 10g lite. When Itry to make configuration I get the following "Bad public user name or password. Database Server Error: ORA-12154: TNS:could not resolve the connect identifier specified" altough I connect at command line with admuser, privuser, pubuser.
Can someone help me?
Thank you

I have the similar problem. But mine is 6.70 client.
I think the problem is that Primavera client cannot the tns file of other oracle softeware installed in the client PC. And the problem for me is I have no idea how Primavera Client read the tns file and I could not find any clues from Primavera client home and the windows' registrats.
Primavera client uses DBXPRESS? how is the db connection configured in DBXPRESS?

Bad public user name or password. ORA-12154: TNS:could not resolve the conn

I tried by all means to resolve the issue, but still i am not able to configure P6 professional to my existing database.
I am always getting error " *Bad public user name or password. ORA-12154: TNS:could not resolve the connect identifier specified*".
I am able to connect to database using pubuser or privuser via CMD.
I also tried through Net Configuration Assistance but no success.
Plz help me in this issue.

resolved

User name in Email Settings

Dear Sir/Madam,
Just got blackberry 8300 and activated blackberry service today with du in UAE. I did not create any user name or password in email settings. However, whenever I enter Email settings screen, it states 'Existing Users' and prompts me to enter username and password.
How can I retrieve my user name or even do a reset on the device? Please provide complete guidance so that I can resolve the matter.
Thanking you.

You bought the device used or remanufactured and the previous use never removed the PIN of that device from his or her account.
The seller will need to call his or her carrier and ask that the PIN be removed-- you can call, but they don't have to do it for you, so be nice in asking. Just simply explain that you bought the device used and need the PIN to be used on your account now.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Configuring a database and get an error: Bad public user name or password. Missing database property.

I have had the bad user name or password other times and resolved it. I looked up Missing database property in Oracle's knowledgebase. The closest response I found to my question said they didn't really know what causes this error. New installation of Primavera version 7 on user machine. I have done numerous database configurations setups with no issues.
Has anybody ever encountered Missing database property?

Please check your oracle client version is correct.
Also try with re-installing oracle client.

Error message + user name ghosted in settings

I hope someone can help. I started getting this message last night after attempting to send a large file.
"Some actions taken while the account .mac account was offline could not be completed online. Mail has undone actions while online. Mail has saved other messages in mailbox "on My Mac" in "On My Mac so that you can complete the actions while online. Additional information: The connection to the server mail.mac.com on port 993 timed out."
Mail is working fine on my G4 - only a problem on my laptop. If I send from my laptop it is received on the desktop - but doesn't show up in Sent or Inbox on laptop. Just hangs....
I have tried changing the ports as was suggested in other posts but no luck.
I have gone into Mail preferences, and under my account information my Username is ghosted. Could this be the problem? Any idea how to fix this?
The three other .Mac accounts on the laptop are fine.
THANK YOU!
L

Did you have any luck with FireFox?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

P6 Pro R8.3 Bad public user name or password. Cannot find OCI DLL: oci.dll;

Here we go again... new release, new round of unsuccessful connections.
P6 Pro 8.3 attempting to connect to Oracle PMDB or EPPM schema.
I have a great installation of P6 8.3 EPPM Web up and running with BI 11.1.1.6.0 /P6 Analytics 3.1 /Unifier
Things I have tried:
- Clean build to new local database on 32bit (Windows 7 Pro) platform with Oracle 10g XE
- Upgrade local db from a working 8.2 installation to 8.3 32bit with Oracle 10g XE
- TNS to working EPPM 8.3 database with P6 Pro client installed on VM - tested successful with 8.2, fails with 8.3
- Clean P6 Client install to desktop of Win2008R2 (64bit) Application server connecting to existing functional Oracle 11g EPPM
- Use of admin.cmd and dbconfig.cmd (~\P6 Professional\Pro\Java directory) to configure/manage connection is successful
- Only one JAVA_HOME - correctly set to the version that installs during P6 8.3 install process
- both 32bit and 64bit JRE - same results
- Correctly edited/tested tnsnames on the client and listner on the server. (Confirmed by EPPM Web functional)
- I can tnsping both a local instance and network db instances
- using pubuser to connect
- pubuser exists and can login via SQL Developer
- upgrade from known good 8.2 to 8.3 db breaks the connection and leaves you with NOTHING TO WORK WITH
- .Net and DHTML installed and correctly configured.
Please answer if you can, Oracle Support seems to be down at the moment.

Some progress... Oracle support is now accessible.
Oracle Support Document 913053.1 helped me address part of the problem. By adding another Path variable as described in the support document, I was finally able to connect to the EPPM and local XE databases using a client PC (Win7 Pro 32bit). The Path variable existed, but with a minor difference - the word BIN was not capitalized. The variable value of [C:\app\product\11.2.0\client_1\BIN] was able to connect successfully. The value [C:\app\product\11.2.0\client_1\bin] was unsuccessful. I am able to repeat this problem.
In my case, it seems that with P6 Pro 8.3, the Path Variable might now have become case sensitive. The steps to perform this funky "secret handshake" are both incompletely discussed and cryptic in the P6 Admin Guide, where it talks about the Oracle 11g Instant Client. The Oracle 11g Instant Client is NOT INCLUDED in the P6 Media Kit. (what a surprise)
I have yet to find why the P6 Pro 8.3 will not connect from the desktop of the server (as 8.2 did) using the 32bit client software. This is most unsettling, because many of my clients use a terminal server installation of the client, which obviously will have this problem.

E65/3com NBX SIP settings

I cannot get an e65 to successfully register to a 3com NBX SIP server. My settings are
service profile: IETF
default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
Public User name: sip:[email protected]
Compression: no
Registration: Always on
use security: no
Proxy Server
Address: sip:10.10.10.1
Realm: None (do not add this to other SIP phones)
username: 422
password: xxxx
Loose Routing: No
Transport Type: UDP (Have tried all three)
Port: 5060 (This is as set on Server)
Registrar Server
address: sip:10.10.10.1
Realm: None
Username: 422
Password: xxxx
Loose Routing: No
Transport: UDP
Port: 5060
Both Proxy and Registration Servers are set the same as they are the same Box. I'm not sure what to do with "Realm", my other SIP phones do not require this setting. Memory cards are no in, Is this a problem?
Regards,
Adam

I dont think I can remove the password, the user profile created on the 3Com NBX must have a password set. I tried the following setting but still get a failed to connect message. Is there documentation on what all the SIP settings are? eg. use security? use compression?
service profile: IETF
default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
Public User name: sip:[email protected]
Compression: no
Registration: Always on
use security: no
Proxy Server
Address: sip:10.10.10.1
Realm: None 10.10.10.1
username: 422
password: xxxx
Loose Routing: Yes
Transport Type: UDP (Have tried all three)
Port: 5060 (This is as set on Server)
Registrar Server
address: sip:10.10.10.1
Realm: 10.10.10.1
Username: 422
Password: xxxx
Loose Routing: Yes
Transport: UDP
Port: 5060
Regards,
Adam

Nokia E51 SIP Settings

For those of you who may be looking for the SIP Settings of your Nokia E51 (maybe this is also applicable to other Nokia models)
I found the solution in: http://www.daniweb.com/blogs/entry2352.html#
But I'm using Voipbuster & so the settings hereunder are for that voip service.
You may just have to change the values depending on your account and voip service provider.
Voipbuster settings for Nokia E51:
Profile Name: Voipbuster
Service Profile: IETF
Default Access Point: Whatever your access point name is.
Public user name: sip:[email protected]
Use Compression: No
Registration: Always on
Use Security: no
Proxy Server:
Proxy Server Address: sip:sip.voipbuster.com
Realm: sip.voipbuster.com
Username: XXXXXXX
Password: XXXX
Allow loose routing: yes
Transport Type: UDP
Port: 5060
Registrar Server:
Registrar server address: sip:sip.voipbuster.com
Realm: sip.voipbuster.com
User name: XXXXXXX
Password: XXXX
Transport Type: UDP
Port: 5060

What do you mean by "caller ID to work"?
First of all, does the SIP settings of Justvoip work with your E52?
http://justvoip.com/en/sipp.html
Or the SIP settings work but you are just asking about the name/number that appears on your friends' display screen when you call them?
As Justvoip & Voipbuster are both from Betamax, I guess it's the same system.
You can't just put any number that you want to appear as your caller ID.
As I said in my previous post, you must register those numbers first as your official caller ID number in Justvoip/Voipbuster.

How to disable user from accessing form settings?

Hi,
What is the authorization to disable a user from acessing the forms settings of the main menu?

General Authorization, User name --> General --> Document Settings --> set to no authorization.
now the user can click n see the form setting, but cant change any prior settings.
Regards,
Dhana.

Why can't I get my emails. Tells me that my password and or user name is not correct

Why can't I retrieve my emails. Won't accept my password and or user name?

Try Settings > General > Reset > Reset Network Settings.
Check if there's e-mail outage with your e-mail provider.

What is on public display - my User Name or MY name?????

Could someone kindly tell me what they see displayed for me as author of this post?
I hate forums that fail to clearly confirm whether a USER NAME or a PERSONAL name is on public display.
On my monitor, all I see is my REAL name when per my custom settings I was expecting to see my avatar and USER NAME, perhaps with something such as "hidden from view" where my real name would be if I weren't asocial and paranoid to CONFIRM that the only thing publicly displayed is indeed my USER NAME.
Thanks!

On thing that is nice, when your Logged on if you want, you can through your User settings change your Username Like mine I have in the past changed mine to B and nothing else) the members on the forum still see you as what you chose when you made your username up for the first time you came on here but when you look at your profile and the post you post.. You see what you changed it too..
This option and many other neat options are available to you in your User settings.. Just have a Look b33

I have a 3G iphone4, iOS 5.1.1. I changed my apple ID and since then iCloud has constantly helpfully let me know that my user name or password is incorrect. I have edited my password in my iCloud account settings, but it won't allow editing my user name

Recently changed my apple ID. On my 3G iPhone 4 iCloud has since then been letting me know that my user name or password is incorrect. I can edit the password in iCloud account information but user name is grayed out and can't be changed to my new apple ID. Haven't been be able to fix this by going into my Apple ID account or synching the iPhone.

In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

User name and password required to access Security settings

I have an HP5520e all in one printer. I am trying to set it to scan to my computer. The instructions say I should activate Webscan from the Administrator Options under Settings and Security. When I try to get to Administrator settings I am being asked for a user name and password. What username and password am I supposed to enter here?
This question was solved.
View Solution.

gnomad899,
Welcome to the HP Forum.
Start with the standard:
admin = admin
password = password (or leave it blank)
This assumes, of course, you have not used EWS (embedded web server) and set a password for it previously -- which you CAN do while using EWS. Once you do set a password using the EWS page, everytime you want to look at certain settings, adjust certain settings, you have to enter the password you set up.
EWS is simply the web page interface to the printer -- like you use a web page to talk to your router software. Same thing - sort of, except you type in the printer IP on your browser instead of the router, of course.
============================================================================
If it won't let you in,
You can try resetting the printer. Be Aware that should you do this, you have to re enter any previously entered information (wireless settings, etc.).
You might be able to reset the printer on the front panel - settings > factory defaults (or similar).
OR
from TroubleShooting > Solve a Problem > Printer Does Not Maintain Wireless Connection
Step four: Reset the printer and wireless router, and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
NOTE:Consider bookmarking this page on your web browser so that you can reference it after restarting the computer.
Follow these steps to reset your printer, your wireless router, and your computer.
Press the Power button on the printer to turn it off.
Disconnect the power cord from the rear of the printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the printer.
Turn the printer back on.
===========================================================================
Reference:
HP 5520 e All in One Printer
User Guide
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

N900 - "public user name" in sip settings!

Similar Messages

Maybe you are looking for