N95 and battery

hi i have had an N95 since june 2007 - i love it but there is one thing that is irritating me and thats the battery (BL-5F 950 mAh 3.7v ) it goes down v quickly and sometimes the phone dies quite suddenly. eg every two days - i don't use it continuously or anything like that - some texting a few phone calls,a few photos and a little bit of surfing. the other day it was warning me the battery was low - i put on charge in my car for a about 15 mins to boost it up and then walked round town and then realised my phone had crashed - this doesn't seem right to me. What do you think - should i contact o2 who i've my contract with or what??

hi,
The same recently happened to me - battery just fading away after half a day - when not even using it to make calls / surf / bluetooth etc... Usually the battery lasted about 2 days (well it did for the first 6 months !)
I got a free replacement from T Mobile but that seemed to do the same (I'm still not sure if it was a brand new battery they sent me or a refurb.) So I sent the second battery back, stating it too was faulty. I now have the Third replacement battery (They made a point of telling me that they were going to send me a brand new battery - but it still arrived loose in an envelope - looking a bit worn I might add!) and guess what ? Same problem.
The only thing I can think of is that I upgraded the software recently (to 12.0.013 - From 11.0.026) and this has caused the problems - either that or 3 "new" batteries mysteriously failed at the same time.
*** I just did an experiment with the GPS function (my wife has the same phone - no battery problems) ***
I just tried MAPS - It seems that after upgrading my phone software - my phone can now get a GPS fix between 5 and 45 seconds - hers still doesn't have a GPS fix after 10 mins! Does this mean that the latest software is running the GPS receiver in the background? and consequently draining my battery much more than it used to?
I am not very happy if this is the case, as although I occasionally use the navigation function on my phone - I'd rather start the GPS up a few minutes before I go somewhere and have my battery last 2 days rather than half a day - Just so that I can occasionally get a quick GPS fix !
....Any one else experience any similar battery problems ?
Oh, I almost forgot - in answer to the above question, you can purchase the N95 8GB battery and put it in the N95 - it lasts much longer. Nokia beefed it up a fair bit for the "black N95 with more memory".
-So my advice is buy the BL-5G battery as a replacement for the "weedier" BL-5F. I think that's probably what I'll be forced to do if I can't resolve this power draining problem.
Cheers,
FM

Similar Messages

  • No updates for N95 and more

    Well it seems to be that there's not going to be more firmware updates for N95. That's a big shame for Nokia because at least I was expecting ASR. I got an iPod Touch and I've seen that even the old iPhone 2G is receiving updates to the next firmware 2. But if you want Nokia's ASR and newest services, you have to buy a new Nokia like the new N96 or N85 they're launching. I've paid so much for my N95 not so long ago and now it's a forgotten cellphone.
    That's why I'm planning to sell my N95 and buy the new iPhone 3G, I know it will not be unlocked, I'll have to unlock it by my self, and I know that it's 2MP camera will not be the same than the N95 camera; but I'm happy because I know that I will always have updates for this device, will have ASR and other things that Nokia could update on their devices instead of making them obsolete.
    Come on Nokia, when are you going to learn?

    hi mate simple threats of going to the iphone will not help them bring out software for your phone , i doubt any software peeps from noia even read this forum its a users forum if you have a problem you should email nokia directly through their contact us pages
    if i was a nokia technician though id have to stop myself from laughing at you for going over to the iphone i mean that would be a major step backwards and youll only be lining o2 and apples allready bulging pockets some more and have a rubbish phone with outdated features for the next 18 months , i mean cmon how long has 3g been out for and apple act as though its new lol anyways i dont want to start the n95 vs apple debate again any power user will know that the n95 is still top of the pile
    there will be 1 more new firmware for the n95-1 , and iam sure it will contain asr and geotagging for the 5mp camera just like the n82s last update did and n95 8gbs added it too, yes thats right the n95 8gb did not come with asr as standard from release it was added in v20 if iam correct v15 for the 8gb dosent have it so it was pretty dam good for them to add it
    anyways v21 on the n95 is very good just add rotate me or landscape pro and your phone will have asr, the nokia technicians dont really have to sort out any issues at all with v21 , it has transformed my phone into a top hanset with decent battery life for such a feature packed handset , new firmwares roll out mainly to iron out bugs if a handset dosent have bugs why would they update it??
    we are lucky that nokia can even be bothered to add new features really , they dont have to do they , the handset isnt advertised with asr is it , nope , so we are lucky they listen and add features
    i seriously cant believe youd leave the n95 for the iphone but hey everyone to thier own
    i personally think nokia do well with their updates and nokia users are lucky that their phones get updated via the net and that nokia can be bothered to add new features etc into the firmware and not just iron out little bugs
    anyways mate id be more patient before you go over to the darkside i believe the new firmware for the n95-1 will be avalible just before the n96 release as the developers are going to be busy with their new hanset and ironing out the new bugs on that n96 , once the n95-1 has asr and geotagging bult into firmware it will be more then the device we was promised and i think nokia will leave it like that for a bit and work on the n96

  • HT4528 About 30 minutes ago, my iphone 4 screen just went white. It still shows the time, signal and battery at the top, but everything else is white. I can't receive calls/text messages. My phone will not lock or turnoff,  but it will charge. HELP!!

    I don't know what to do. My iPhone 4 just all of a sudden had a blank white screen. It still shows the bar at the top with the signal, time, and battery life. But the rest of the screen is white. If I touch the screen it acts like it's selecting something and gives me the choice to "Copy". It will still charge when I plug it up, but i cannot turn it off or lock the screen. I tried leaving it alone for awhile to see if it will lock on its own, like it normally would, and all it does is dim the screen. I guess im going to try to just let it die, and then see what happens, but if anyone else has any suggestions (other than taking it in to be looked at or getting a new phone) I would greatly appreciate it!

    Any number of things could have caused the phone to do this. If after the reset you are experiencing additional problems, the next step in the troubleshooting process is a restore from a backup. Make sure you have one before you start the restore process. If that does not improve things, then you may have to restore as a new device. Remember, restoring as a new device will delete all data off the phone. Make sure all of your pictures are imported to the computer and all other data is synced to supported applications on the computer before restoring as new. See this support document about backups http://support.apple.com/kb/HT4946, and this about restoring the phone. http://support.apple.com/kb/HT1414

  • Heating and battery problem

    My Sony Xperia Z1 has started getting really hot and battery discharges really quickly. As far as I'm aware I haven't changed anything for this to happen. Any known causes or solutions? Thanks

    Are you playing games? are you running a lot of background apps and services? auto backup with G+? Auto updating your apps? 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

    Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

    I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

  • Data usage and battery drain has skyrocketed with iOS 8.1.2 (maybe earlier)

    3 weeks ago my wife got a text message on her iPhone 5 from AT&T that she had used 90% of her data for the month.  30 seconds later, she got another one saying that she had used 100%.  Granted, her data plan is small, 200 MB.  But, for the last two years she has used as little as 17 MB in a month and her largest prior to this latest month was 49 mb.  This month she got to 380 mb before we were able to shut off her cell data.  Otherwise, a second chunk of 200 MB and another $15 would have been added to the month.
    We had noticed that her battery had been draining rather rapidly in standby mode with no background apps running when she didn't have access to WiFi.  We have now correlated the two results, High Cell data usage, Quick battery drain and very warm phone.  In case anyone is wondering about her iPhone 5 being one in the recall, it is.  I took it in and had it tested.  Apple says the battery is fine.  It does hold a charge well.  When all network communications are shut down on her phone and it is in standby mode, there is no noticeable loss of charge in 24 hours (our longest test).
    Since I have a grandfathered Unlimited Data Plan with AT&T, I have been doing some testing on my iPhone 5s.  Sure enough, I've seen similar results.  With nearly everything turned off except Cell Data, I've seen 483 MB used in 24 hours.  Of that total, 479 MB was used for Documents & Sync.  I even have everything turned off in my iCloud account, Location services are turned off, no push notifications etc...
    The best I can figure, this has been a problem since we installed 8.1.2 and yesterday I installed 8.1.3 resulting in no positive effect on this issue.
    At this rate of data usage and no access to WiFi, my wife would have to have a 15 Gb data plan to keep from exceeding her limit.  I don't think AT&T even offers one that big anymore.  I might have to switch to Sprint or T-Mobile if this doesn't get resolved.
    Any ideas would be greatly appreciated.  Thanks in advance for your shared insights.

    Hey this is Brian, bjmcmurry, under a different user ID.  If I logged in as bmcmurry, original post, I was just getting a server error and couldn't get to this discussion nor post a comment anywhere.
    Anyway, let me be as brief as I can.  After an extensive analysis of replicating the problem on another phone to eliminate it being a hardware specific issue and that the test phone has an unlimited data plan, I was able to stop the excessive data usage and consequential battery drain.  I believe I have a reasonable explanation of the problem, an iOS logic bug.
    I had everything under my control clamped down on the test phone to minimize data usage.  Also, I was forcing all data usage to use the cell towers.  I determined that I was burning at least 11 to 13 Mb per hour doing nothing important.  I literally had everything turned off except 'Settings' was allowed to use Cell data providing a avenue to log into the Apple ID. 
    The two phones had 2 things in common, they were using the same Apple ID and the same version of the OS.  One was a iPhone 5 and the other was a 5s.
    Here is a synopsis of my experience via my written evaluation of the Apple support system (Apple Rep name's have been removed):
    After a couple of hours on the phone with an Apple Care Senior support Analyst, it was suggested that I go to the Apple Store to 1) get my battery replace in the iPhone 5 since it qualified for the replacement program and 2) see if the Genius could provide me with any insight in the data usage issue and battery drain.
    I'm certainly glad I had multiple reasons to visit the closest Apple store, a 45 min drive.  I got the battery replaced, thanks for that. 
    Regarding the important issue to me that brought me to the Genius Bar, excessive Cell data usage, I thought the Genius did a wonderful job listening and documenting the problem we were experiencing.  Unfortunately, educating us on the use of the product or replacing our phone was not going to solve the problem.  He eventually figured it out, this was not a user error or broken hardware.  We surmised that the reason I was sent to him was to verify and document that there was a problem.  I clearly had a problem.  After writing copious notes on the issue, The Genius smartly referred me back the the AppleCare Senior Advisor.  So, back to AppleCare Senior Analyst I went. She, knowing this was not a simple problem to solve i.e. beyond her level of expertise, got an Apple Software engineer involved.
    My primary frustration is that this should have been escalated to software engineering right away.  My trip to see the Genius was, I believe, a waste of time for both me and Apple regarding this issue.  Diagnosis of this type of problem is well beyond the Genius’ knowledge and job.  The Genius did a very good job doing what he could within the scope of his job.  He just couldn’t solve this problem and had no one within Apple to which he had access for help.
    However, that initial consult with the engineer was a bit feeble.  Not only could I not talk to him/her directly, his/her focus was still working with the ‘Black Box' approach.  Having Analyst ask me to do stuff like restore the Phone was more like trying to find a 'work around' than 'identifying the real problem.'  Maybe restoring the phone was going to fix some corrupted data on the phone sidesteping the real problem, the handling of this condition.  The engineer did listen to the fact that I had restored the test phone, the 5s, and only added the use of my Apple ID.  Duh, been there!!!
    Having been an previous owner of a software development company that I started in 1980 and retired in 2001, I can tell you that using the 'Black Box' method of debugging is extremely inefficient.  Instead, having access to an ‘Activity Manager’ type app to identify in real time what process was blowing up the data flow would have saved me a lost afternoon at the Apple store and hours on the phone with tech support.
    Ironically, I may have stumbled onto a "work around" solution short of turning off Cell Data that stopped the excessive Cell Data usage and consequential battery drain.  Just prior to leaving the Apple Store, I used one of their Macs to log in my Apple ID on the id.apple.com website to ‘Manage my Apple ID’, I was forced to upgrade the security level of my password.  Afterward, my cell data usage seemed to drop dramatically.
    I told the AppleCare Senior Analyst that I may have stumbled onto a workaround and I suggested that I give it a couple of days of monitoring.  We'd talk then and I would have results to report.  She agreed. 
    Sure enough, my Document & Sync usage was back to normal, about 1/2 Mb per day.  Am I happy that the excessive Cell Data usage has stopped?  You bet!  But, there was no intuitive reason that an end user would know to log in on the ID website to unknowingly solve this problem.  As I use to say to my employees, that is not the ‘Macintosh Way.’  And, rebooting the the 'Microsoft Way.'
    When I reported my findings to the Analyst, we both concluded that data usage was back to normal.  She did report to me that the engineer did provide a laundry list of suggested activities to help solve the problem.  Remarkably, they were everything that I had already done and were pretty much what the Analyst and the Genius tried to do.  All reasonable tasks.  But clearly, the engineer hadn't even ready the notes on the case before responding.  And, none of the things suggested would have uncovered the real problem, likely a logic bug in iOS.
    My advice now is to have the software engineering team rule out that there was an unresolvable state that a background process was fiercely trying to handle.  The iOS does not seem to know how to intervene and prompt the user with a requirement to upgrade their password.  If this does end up being the case, I would call it a logic bug, a perpetual exception that is not being handled properly.
    Anyway, I hope this helps you.

  • Memory upgrades and battery scratches

    Good afternoon all!
    I couldn't find where to email Lenovo directly so unfortunately I'm going to have to post here.
    I'm probably going to catch some flak for this but hey ho, so heres the thing, I bought two brand new Lenovo 3000 N100's 5 years ago, all good, they both came with a 512MB SO-DIMM and since I wanted more memory I bought 2x1GB SO-DIMM's which I put in mine and put the other 512MB in the other one giving mine 2GB of RAM and my mum's 1GB of RAM.
    Doing this was easy peasy, unscrew *ONE* screw and the flap just slides out of the two slots on the opposite side of the flap to the screw. Job done.
    Scroll forwards 5 years and times have moved on... a lot and it seems like we apparently need to MASSIVELY over engineer things now.
    So I bought three Lenovo 3000 G570's, all good stuff and all came with 1x2GB and 1x4GB for a total of 6GB, all good but me being me and a Firefox tab whore, what with RAM being so awesomely cheap I decided what I was going to do was get 8GB (2x4GB) SO-DIMMS (Corsair), take out ALL my existing memory, put in the new Corsair 2x4GB SO-DIMMS, take out the 2GB SO-DIMM from the one I got my sister and put in my now spare 4GB SO-DIMM giving me 8GB of RAM, my sister 8GB of RAM, my mum sticks with 6GB of RAM and I have 2x2GB SO-DIMM's left over spare.
    SO, my sister and mum have already unboxed theirs and all is well, I unboxed mine, flipped it over and there are no less than *FOUR* screws holding the flap in now, granted there is just one 'flap' covering the CPU/RAM/HDD/WIFI/etc so okay fair enough, it's a big 'flap' after all.
    So I undo said four screws and I should just be able to slide the panel out now right? Wrong, obviously four screws were deemed not nearly enough to keep it in place, so there are now tabs which are actually clipped in around pretty much all sides of this panel.
    Well okay this can't be difficult right? Wrong. Now I'm a firm believer in the notion that if it won't budge don't just keep applying more and more force until something breaks. So I'm looking all over this thing, testing it gently from different sides to see if I can prise it open but it's becoming quickly apparent that I'm expected to BEND the panel so I can get the tabs out around the sides!
    MASSIVELY over engineered and COMPLETELY unnecessary, were the FOUR screws not already holding it in place okay? It certainly seemed that they were? Okay so I need to bend the panel to get the tabs out but I'm guessing it's a reasonably easy thing to do not requiring much force right? Wrong. So it became quickly apparent then I'm going to need quite a bit of force, the problem is it's the kind of force that requires a flat head screwdriver and despite my best efforts it was impossible not to mark the bottom of my nice shiny brand new laptop! But that's not the end of it.....
    So I've undone the four screws and I've managed to bend the panel and prize out all that tabs as gently as possible all whilst doing my best to try not slip the screwdriver underneath the panel taking a nice stab at the motherboard/memory/CPU/wifi/etc underneath because that would just *really* make my day, so the four screws and numerous tabs would be it right? Wrong. It appears that there is something underneath the panel STILL holding on, "more tabs?!" I cry in despair as my engineering family background cries out "WHY LENOVO GODS? WHY?!!! Does this panel need to survive a thermonuclear explosion?! Does it need to stay on whilst being driven over by a tank?! WHY?!".
    So I'm trying everything, gently wriggling it this way, wriggling it that way, lifting it this side, lifting it that side, EVERY conceivable way of removing the final tab underneath I tried.... and failed. I pour through all the manuals again, maybe I've missed something? Maybe I'm just being completely thick (it's not unknown to happen)? But no, the manual makes it sound as easy as breathing so I give it one last try, I lift the panel putting more and more force through it until eventually BANG it comes off.... and I sit there staring.... laptop on the table.... the panel in my hands.... and the now broken tab.....
    link to image
    ....wonderful.
    With sigh I proceeded to install the new memory and replace the panel which now ironically goes on and comes off again SIGNIFICANTLY easier now the tab underneath has broken off and do you know what? The panel doesn't seem to have lost any of it's ability to stay in place? Funny that.
    The other funny thing is that when I go to 'upgrade' my sisters laptop, the panel comes off EASILY! Maybe during assemble mine was done differently? Maybe the tolerances on mine just made it too tight to come off easily but with another sigh I go to put the battery in my new laptop so I can check all is well and what do I find?
    The battery has scratches all over it:
    link to image
    All three brand new laptop boxes had the Lenovo seal on them so the retail store couldn't have opened it and my sister's and mum's laptop's were all fine?
    So dear Lenovo, I love buying your laptops, I've bought five already, I'd buy again but would you be so generous as to send me a new panel and battery? I'd really appreciate your help.
    Regards,
    Benji
    image(s) >50k converted to link(s).  

    hey LondonBenji,
    awesome post that looks like a TARDIS... "Bigger on the inside". Anyway, sorry to hear on what had happened, I suggest giving our support team a call via
    Tel. +44 (0) 870 608 4465
    Mon-Fri 9am-6pm
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

    I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
    Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • So after updating my ipod touch 3rd gen to 4.3.1 i noticed a lag everytime i turn it back on. it stays on the lock screen for minutes sometimes hours. the screen is usually unresponsive the only things usually changing are the time and battery percentage.

    so aafter upsating my touch to 4.3.1 i have noticed everytime i restart the ipod there is a huge lag at the lock screen. the screen only updates itself every three to five minutes only updating the time and battery status. i cannot do anything, usually it will stay like this for minutes sometimes hours. i have tried restoring it and thought updating will fix the problem but it hasn't yet. i currently have ios 4.3.3. recently i had a friend look into the ipod and he told me on a folder called damaged files he found this, 37c3ad com.apple.autowake.plist. how can i fix this?

    Try a manual install following directions in link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD  

  • Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

    Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • When checking mail. Signal, "E", time, and battery disappear?

    Hey everyone I installed the most recent update on my iPhone but when I go and check my mail I can no longer see that little bar on the top where it would display the time, signal, and battery. It just turns grayish silver and the information that would normally appear doesn't. Anyone else having the same issues?

    Yep, I'm experiencing the same issue and I've reported it to Apple via the iPhone Apple Feedback web site.

  • Firmware Upgrade and Battery Life?

    Since the firmware upgrade on my Macbook in early February the fan appears to be running at full speed all the time and battery life is crap! Has anyone else noticed this? Is there a fix/workaround available please?

    Sounds more like an app stuck processing that shouldn't be....does happen from time to time. Behing hot means it is constantly processing.
    To fix:
    Try a reboot (described below).
    Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
    A reset/reboot is:
    Go to Home Screen
    Press and Hold Home Button
    Keep holding and press and hold Lock Button
    Keep holding Both
    You will see Slide to Turn Off (Don't let go to slide, just keep holding)
    The phone will turn off (in time, but screen will look like it has some white lines)
    Keep Holding
    When you see the Apple Logo, you can let go.
    Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
    You may also wish to read this tread about reboots and odd application behavior.
    http://discussions.apple.com/message.jspa?messageID=5851978#5851978
    For me, 2.1 works great.

  • Audio is not working properly and battery is not lasting

    audio is not working properly and battery is not lasting over 30 mins

    Hello swampdonkey,
    I see that you are having a problem with the sound and battery on the computer. I would like to help with this issue but I need some information.
    Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • IPhone 6 Wi-Fi and Battery Problems

    Background info:
    -- My first iPhone 6 kept randomly shutting down and turning itself back on while I was in various apps and on the home screen and also while the phone was on stand-by. I called Apple Support and they sent me a replacement without asking too many questions.
    -- I don't know if my replacement is new or refurbished, although I'm assuming it's new since I received the replacement about 2.5 weeks after the release date of the iPhone 6, but who knows.
    Problem:
    The replacement iPhone's wifi and battery.
    Wi-Fi:
    -- My replacement/current iPhone 6 is running iOS 8.0.2.
    -- Trying to load anything while on wifi is so, so, so SLOW. I don't even use it on my phone anymore and I stick to cellular data because that is how bad it is.
    -- I did NOT have this issue with my original iPhone 6 (iOS 8.0.2).
    -- My iPad Air (iOS 8.0.2) has absolutely no problems with the wifi.
    -- Resetting my network settings fixed the issue for literally 15 minutes before the problem started again.
    -- Restoring the phone from backup does not work. Setting up the phone as new does not work.
    Battery:
    -- My original iPhone 6's battery life was amazing. I could go through the whole day with heavy use with my cellular data and location on and still have a good 40% left on it. It took A LOT to kill even 10% of it.
    -- My replacement iPhone's battery is absolutely pathetic. Light use (texting, browsing) with cellular data on and location off for an hour kills 20% of it.
    -- Pretty much any "battery-saving" thing I can do is done (like turning off wifi, cellular data, and location unless it's absolutely needed).
    I don't want to contact Apple for another possible replacement because I just feel weird about it. Obviously I will if I have to.
    Do you guys have any suggestions or fixes? Please help!

    I downloaded the Speedtest app on my iPhone and iPad and would randomly test one right after the other. I accumulated about 5 tests a day on each device over the course of 3 days. I set up an appointment at the Genius bar. I told the Genius that I set up my phone as new and then showed him my comparisons of the Speedtest on both devices. He handed me a new (non-refurbished because it hasn't been out for long) phone, no questions. Apparently it was a hardware issue and not an iOS 8 bug.

  • Updated to OS 10.7.3; fan runs constantly and battery life dropped to under 2 hours when 100% charged. How do I get back to 10.7.2, I don't have a backup prior to this upgrade. This is a newer Macbook Pro 13", no modifications.

    Help! This new version of Lion is making me miserable. The fan runs constantly, the computer is hot and battery life has dropped to under 2 hours on a fully charged battery. I updated yesterday, nothing but misery today. Even running the mail program alone make the fan run like I have everything open. Using Pages, iPhoto, and iTunes simultaneously makes the computer blistering hot.Yesterday, I could use all three without any trouble. Any suggestions to either jettison 10.7.3 or how to fix without any expense? I haven't modified this computer at all, it is as it came from the box in August 2011: 2.3 GHz Intel Core i5, 4GB 1333 Mhz DDR3.

    I updated to Lion 10.7.3 and started noticing my fans running on high all the time and my battery would drain 2-3x faster.  I was going to take my computer into an Apple store until I found this thread.  I did the SMC reset by shutting down my computer, plugging it in, and then pushing down shift+control+option while also pushing down the power button.  Nothing happens on the screen and the computer did not turn on.  I then released all the buttons at once after holding them down for 10 seconds. 
    After that, I simply turned my computer back on and everything seems to be working fine.  The  fans are not blasting anymore.  I have a newer MacBook Pro where I can't access my batteries.  The SMC reset may differ for other types of laptops. 

Maybe you are looking for

  • Photoshop CC 2014 on Windows crashes everytime

    Hello I have Adobe CC installed on my work computer and a handful of the apps on my home computer. Just tried Photoshop CC 2014 on the home PC (Intel i7, 8MB RAM, AMD7570 gfx) and it ALWAYS crashes after the launch and initial prompt to import settin

  • Why can't i download the new I Phone software version (4.2) to my I Phone?

    Help! I have tried to do this software update about 10 times now! I have downloaded it successfully through I Tunes on it own but when i come to connecting my phone and trying to update it through I Tunes to my phone it downloads for about 11 mins, l

  • Problem with CFA CSS

    Hi.. We are using CUCM 7.1.3 (30000-2). My Line1 CSS is CSS_International and my CFA (call forward all) CSS is also CSS_International. In this scenario i can able to give a local or Long distance or International numbers as CFA number  in my phone. B

  • How to compute data from different data sources?

    All we are doing with data is from one single datasoure, which could be from oracle or sql server or a excel table, the issue is how could we combine these data from different data source with SQL? Example: i need some data from Sale Table in Excel a

  • Send job log as attachment when job cancelled

    Dear Friends, We have created job chain and also configured emails alerts functionality. Our requirement is to attach the job log file along wiht email alert. Thanks in advance. Any suggestions are welcome. Regards Jiggi