Send job log as attachment when job cancelled

Dear Friends,
We have created job chain and also configured emails alerts functionality.
Our requirement is to attach the job log file along wiht email alert.
Thanks in advance.
Any suggestions are welcome.
Regards
Jiggi

Dear ,
You can configure email attachment in destinations:
Script name> Properties> Related Objects--> Destinations
use Script sysjcs.RW_EMAIL_OUTPUT
hope this will work.
Thanks and regards
Muhammad Asif

Similar Messages

How to send a job log/Spool once the job completed?

Could you please help me how to send a job log/Spool once the job completed.
There was an option is available System Send mail to send a mail once the job completed . So could you please help me how we can send a job log using this option .
I have tried the below but i didn't get any mail . Could some one help this please !
For example :
Job chain name : Test_spool
                Step1 : Reportstep
                                Job definition u2013 XXX_YYY
                Step2: Mailstep
                                Job definition: system_mail_send
Expression : Reportstep,job<(what i need to mention here )>:reportstep/log.txt
Check the ablove mentioned is correct and correct me , still i didnu2019t get the log in the mail please .
Thanks
Ramkumar

Hi Ram,
I need your help on getting mail alert with log file.
here is how i have provide the parameter valure for job definition: system_mail_sent.
Step1 with one job1 and step2 with one job1
In step2 , i have included the job definition to send mail. with below parameter.
Relative Job: Step 1, Job 1
Job File: step 1, job 1: step 1/log.txt
Please let me know if the above method is correct or not.
NOTE: mail server and from address are configured.
Thanks,
Karthik

How to send a job log/Spool once the job completed in an other Jobchain

I have a Jobchain which raises events when Job goes to status error.
After that a job starts which sends a mail. In this Job I have the parameter:
raising_job_id:
=waitEvents.NSN_JOB_ON_ERRORO.raiserJobId so I can pass the Job ID and send it in the mail.
But how can I also pass the Joblog of the errorjob to the sending mailjob ?
relative_job_id and loblog parameters from system_mail_send job does not work because it's not in the sam Jobchain.
Do I have to use some pre/post running actions ?
I'm not familiar with Java programming
Br
Uwe

Hello,
Then this is your lucky day! Since you already have enough knowledge to get the job id from the raiser event you are already half way there! This is because the System_Mail_Send job also understands an arbitrary job id as a RelativeJob. So if you pass the found job id into the RelativeJob parameter and * into the JobFile parameter all output files from the failed job will be send out.
Regards Gerben

Confusing error message in job log of infocube loading job

Hello,
I executed a job which runs a process chain. The process chain has two important steps: It extracts tranaction data from a planning area in an infocube and it loads APO-relevant master data (materials, plants) from R3 system in the same infocube.
Almost every step of this process seems to be executed correctly. The loading process ended successfully. But the spool of the job is a bit confusing:
Loaded CVC's are all listed and appear with a green traffic light. Master data appear with a red traffic light and with the comment: Product xxx does not exist. The same with the location.
Does anybody know why the signals are red in this case.
In APO and R3 all listed master data are available - in the planning area as well as in the infocube after the data loading.
So, I am very confused about this message text in the spool because everything seems to be ok....
Thanks in advance
Best regards
H.Becker

Hello Heinz,
First of all, we need to be sure regarding which step the particular log correspoinds to.
You mentioned that your process chain has 2 steps.
Do you know how to look at the logs for a particular step of a process chain?
Go to RSPC, double click on your process chain, and then click the log button at the top?
You would now be in the log view. Then double-click on the step no.1, and see the information contained in the central tab named "backg". Does this contain the errors corresponding to you reds (that location or product does not exist)?
If not, repeat the same step for step 2.
Once you are sure regarding the step against which you are getting your error, please share soe more info regarding the step.
Then we could look further into the possible cause.
PS: Your first message itself was very confusing. You mentioned that you get transaction data from planning area to the cube, and you also get CVCs (location/products) from R/3 source system to the cube. This is very confusing.
Thanks - Pawan

Start job on server B when job is finished on server A

Hi,
like the subject already explains: Does anyone know how to schedule a job on server B (= BI server) that only starts after the successful end of a job on a different server A (= ERP server).
kr,
Rutger

> like the subject already explains: Does anyone know how to schedule a job on server B (= BI server) that only starts after the successful end of a job on a different server A (= ERP server).
With the default scheduler (SM36) this is not possible - but you can use the external Redwood scheduler, which is free of charge if you have a Netweaver license.
http://wiki.sdn.sap.com/wiki/display/CPS/CentralProcessScheduling+%28CPS%29
Markus

Job log messages in BPM

Hi All,
I am doin Business Process Monitoring for monitoring batch jobs of a satellite system so that we will be getting tickets when some job is cancelling.
for cancellation of jobs SD tickets are generating.
now the requirement is to genarate a SD ticket for the successful job completion.
in BPm we have one option as "job log messages" in Background job monitoring type.
can we do it from there? How will the information be displayed in the ticket for job completion?
we are defining some threshold values also in that option. how those threshold values will help in generating SD ticket.
can anyone please suggest some idea.
thanks
Tripti

Hi,
You can monitor job log message with Business Process Monitoring in two ways (for an alert description see http://help.sap.com/saphelp_smehp1/helpdata/en/99/b45f54119044f19d389b2cad3430bc/frameset.htm)
a) Error messages:
Use case: You want to create alerts/notifications if background job creates more than N error messages in the job log.
-> Use the upper limit for yellow/red alerts.
-> Example: Job canceled ->monitor message of class 00 and with ID 564 (type A)
b) Success messages:
Use case: You want to create alerts/notifications if background job creates less than N success messages in the job log (Usually you want to watch the create of follow documents or the successful update of documents)
-> Use the lower limit for yellow/red alerts
-> Example: Job finished without error -> monitor message of class 00 and with ID 517 (type S).
In both cases you will get a green rating - but no notification - if conditions for yellow/red alert are not met. Notifications (manual and automatic creation) are allowed for yellow and red alerts only.
See also the documentation for Job Scheduling Management:
http://help.sap.com/saphelp_smehp1/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Best regards,
Martin

Suppress job logs

Hi,
I want to suppress the number of job logs created.
I am using the function module 'Archive_Write_Statistics'.
In that function module there are 2 parameters 'Statistics_only_per_file' and 'Statistics_only_per_run'.
These 2 parameters are used to suppress the job logs created.
When i do this it creates hundreds of pages of job logs.
I want to restrict it only to a couple of pages...
kindly suggest me a solution...

Hi Alik,
I have strong doubts that this will work ...
From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
However I actually did not test it, so I am not 100% sure.
Best regards,
Nils Buerckel
SAP AG

How to check HP LaserJet 500 color M551 job log

Hi Everyone
I have a new HP LaserJet 500 color M551 set for users, after user print a document to the printer, I want to know how many sheet it used. In the job log page I can only find who print it, output size, black or color... But I can't check how many sheet the print job used. Is there nay method to check it?

Thanks for the reply
I had try the method but it still can't get the info. what I want get is how many sheet(s) the print job used but it didn't show in the job log page. the print job only show following info:

Job logs from the original system after Unicode conversion.

Dear Globalization experts,
We are doing Unicode conversion and would like to know, if the Job logs from the batch jobs, executed before conversion (system with a 1100 code page), would be readable in the Unicode system after the conversion. We will move job log files from the source to the target system. I . Thank you in advance for your help.
Best regards,
Alik Shapiro

Hi Alik,
I have strong doubts that this will work ...
From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
However I actually did not test it, so I am not 100% sure.
Best regards,
Nils Buerckel
SAP AG

Distribute System - Error when run tcode DB13 - Job Log - Cancel

i have two server and I installed SAP ERP 6.0 (Application ABAP) on two server base on Distribute System model
Server A : I installed Global Host Preparation and Central Instance
Server B : I installed Database Instance
On server A, I exported /sapmnt, /usr/sap
On server B, I mounted /samnt, /usr/sap from Server A
Process Installation -> OK
and finally , I logged in SAP through server A -> OK
But when i run tcode DB13 to run Action Pad : Cleanup Logs, Check and Update Optimize Statistic ....etc -> Cancel
-> with error in tab Job Log below
20.01.2010     14:37:07     Job started
20.01.2010     14:37:07     Step 001 started (program RSDBAJOB, variant &0000000000041, user ID BASIS)
20.01.2010     14:37:07     No application server found on database host - rsh/gateway will be used
20.01.2010     14:37:07     Execute logical command BRCONNECT On host sapree2
20.01.2010     14:37:07     Parameters: -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_host: rc = 403
20.01.2010     14:37:29     SXPG_STEP_XPG_START: host = sapree2
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
20.01.2010     14:37:29     SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
20.01.2010     14:37:29     SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE(LONG)
20.01.2010     14:37:29     <timestamp> = 20100120143729
20.01.2010     14:37:29     COMMANDNAME = BRCONNECT
20.01.2010     14:37:29     ADDITIONAL_PARAMETERS = -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     LONG_PARAMS
20.01.2010     14:37:29     OPERATINGSYSTEM = ANYOS
20.01.2010     14:37:29     TARGETSYSTEM = sapree2
20.01.2010     14:37:29     DESTINATION
20.01.2010     14:37:29     SY-SUBRC = 1003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
20.01.2010     14:37:29     Job cancelled after system exception ERROR_MESSAGE
and then , I checked tcode SM59 -> TCP/IP Connection -> SAPXPG_DBDEST_SAPREE2 -> Test Connection -> not OK with error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapree1.reecorp.com / sapgw00
Error Details     DETAIL: no connect of TP sapxpg from host sapree2.reecorp.com after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 22
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 20 14:42:39 2010
Error Details     VERSION: 2
thanks for your advice

Hi,
For installation you can refer the standalone gateway installation guide available under http://service.sap.com/instguides
For operating the standalone gateway you can use the below link
http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/content.htm
Cheers.....,
Raghu

Sending log files for scheduled jobs as attachment through mail

Hi All,
Can any one please help me out to write a pl/sql program to send log files for scheduled jobs as attachment through mail.
Thanks.

Why would anyone do that as this code has already been posted here a thousand times, it is all over the Internet, and the only thing you need to do is to search for it?
I agree it would cost you some effort, but you are getting paid for it, and we are not getting paid for delivering it on a golden plate on your doorstep, as you can not be bothered to use online resources.
Sybrand Bakker
Senior Oracle DBA

How to send Notification mail (with attachement) from On-Demand job

Hi Experts,
I am using SAP IDM 7.2 SP8.
Requirement is to send a notification mail to a specific mail address [email protected] whenever we run a on-demand job.
On-Demand job should also attach a csv file (atttachement.csv, which is in a specific folder D:\folder) while sending the notification mail.
Please help.
Thanks & Regards,
Chandan Kumar

Hi there,
It sounds like you have the basics all together. I would check how you are setting the following parameters of uSendSMTPMessage:
Attachment
Optional. Fully qualified file name of a file to be included as an attachment.
Multiple attachments can be added by separating the file names by a pipe character (|).
AttachmentType
Optional. Valid MIME attachment type.
Charset
Optional. Valid ISO character set identifier, for instance ISO-2022-JP. The default value is ISO-8859-1.
HeaderEncoding
Optional. 0: Plain text, 1: Base64. Default: 0
TransferEncoding
Optional. 1: 7bit, 2: 8bit, 3: Quoted ASCII, 4: Base64. Default: 4.
Sorry the first row got mangled a bit.
Matt

My jobs end up "cancelled". And I can't read the job log.

Problem:
User runs program "zmakechild" and this creates 4 batch jobs to
start immediately with job names child1 to child4. But, each time
only one job is completed and other 3 cancel. Examining batch
process logs show deadlock on table TST01.
SM21 shows following error:
Database error: TemSe->XRTAB(3)->1 for table TST01 key [850]JOBLGX041944
Solution:
TST01 did not have a primary index at the database level. PSS created one and it worked.

iPod: How to find the serial number - Support - Apple

When job hunting, can I attach a PDF of my resume from iBooks to on online job application?

When job hunting, can I attach my resume as an iBooks PDF to an online job application?

Employers tend to have little patience with inconveniences job-hunters impose (sorry, but I am trying to speak as employers do).
If you attach sometihng other than an MS-standard Word document that easily and cleany opens in MS products, they may lose patience and not give your application much attention.
Also, most employers read the first page of a resume and hiding "gems" at the end will only hurt you.
Again, just speaking as employers think.

How to activate job log creation when WPxx dies

Hi all,
Allmost daily one of our SAP work processes dies at OS level.
This leaves some locks open, which freezes the (productive) system for about 10 minutes.
Unfortunately, no OS log is created of this dying WP job.
SM21 only tells us that a WP died, not why.
So no root cause analysis can be done.
How do I trigger / activate the creation of an OS job log whenever a SAP R3 job dies / ends ?
Kind regards,
Paul Hoogendoorn

Hi Paul,
A change of the wp's job description should help:
CHGJOBD JOBD(R3<sid>400/R3_nn) LOG(4 00 SECLVL) LOGOUTPUT(JOBEND)
HTH,
Thomas

Send job log as attachment when job cancelled

Similar Messages

Maybe you are looking for