N95: Lousy Bluetooth connection to headset when ba...

Hi all,
I have a small problem (but very annoying one)
When my phone (N95) battery is low (50% or lower)
The Bluetooth connection become very lousy, and it's almost impossible to use
the Bluetooth headsets because I am getting a lot of background noises.
When I am plugging the phone back to the charger the noises disappear.
Any idea how to solve this issue?

Uhm, that seems the only problem. If battery fully charged, then it works, if it goes down, then it doesnt work. The battery is the only constant changing aspect of the phone. In all seriousness the battery could be going dead for all we know as it is starting to give out lower output when charge goes down.
Best thing you can do is to try another battery.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • N95 dropping bluetooth connection with tomtom 510

    I have just acquired a n95 and have successfully been able to pair the phone with my tomtom 510. However after switching the phone off and then switching on to then reconnect with the tomtom it just does not connect automatically, although I have set it up to do just that. I have done a search on the forum but can't find anything. Please could anyone assist. Many thanks.

    I have the N95 8Gbm and a TOMTOM 510 - they are paired but will not connect - i get the image of the phone and a question mark through it and the phonebook will not copy as it says its not suppoerted
    I use both for my business and need it sorted, but is it Nokia or TOMTOM thats the issuee????
    Blah!

  • Wireless Mighty Mouse loses Bluetooth Connection

    Our new iMac arrived today and works fine except for the wireless mouse which loses the Bluetooth connection frequently, especially when the mouse is "Turned off" and then turned back on (every time?). Has Apple acknowledged this problem? It appears that there are many (all?) systems failing this way. Numerous boards are reporting similar unreliability of the Bluetooth system. I tried re-seating the batteries and checked all the software settings that might make sense. I read the manual 3 times. Only turning Bluetooth off and then back on seems to relieve the problem, but only temporarily until intentionally turning the mouse off. The connection was first lost in the midst of normal mousing activities. We discovered the relationship to the on-off switch while investigating the first lost Bluetooth connection. I now have a wired mouse connected to recover the lost Bluetooth connection each time it is lost. Help!!!

    HI and Welcome to Apple Discussions...
    Try deleting this file. com.apple.bluetooth.plist
    /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and restart your iMac.
    *"especially when the mouse is "Turned off"*
    That definitely break the Bluetooth connection.
    Sometimes you need to remove the mouse from the System Preferences/Bluetooth Device window and "re-pair" the mouse using the Bluetooth Setup Assistant.
    To set up a Bluetooth device to work with your computer:
    Choose Apple menu > System Preferences and then click Bluetooth.
    Open Bluetooth preferences
    Click Add +
    Choose the type of device you want to set up and follow the onscreen instructions.
    Carolyn

  • Nokia 6350 bluetooth connection to PC may or may-n...

    My issue is this:
    MY HARDWARE / SOFTWARE:
    - Nokia 6350 phone
    - IOGEAR GBU321 usb bluetooth
    - Windows XP on Dell Latitude D610
    - PC Suite 7.1.51.0
    PROBLEM:
    PC Suite works fine with my phone if I'm in range. If I walk far away and bluetooth connection is lost, when I return to range, the synch btwn PC and Phone MAY or MAY NOT resume. Most of the time it does, but sometimes it does not.  I've tried to close/re-start PC-Suite to no avail. I've tried to re-detect my phone via PC Suite...nothing.
    The workaround fix I've found  to resume the PC--Phone connection is this:
    - On the bottom left of task bar, right click on the bluetooth icon and "Explore My Bluetooth Places"
    - Delete "Nokia 6350 OBEX File Transfer"
    - right click on the bluetooth icon and select "Quick Connect"-->"File Transfer"-->"Find Devices"-->"Show All Devices"-->select the Noka 6350 (for some reason it's visible here)-->and click "Finish". 
    Then suddenly, my PC-Suite Icon show connected again and I'm back in business.
    WHAT is causing this and HOW to fix this permanently ? Something is timing out in PC-Suite.
    Thanks,
    Neel

    Possibly contact your dealer, I work in the motor trade, and most manufacturers can update the sofware for their bluetooth systems for newer phones, it could be a compatibility problem, the handsfree set will have been built before the phone !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • N95 Bluetooth connection with car

    I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
    With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
    Is there any trick to open the phone directory for use in bluetooth mode?
    Best regards and thanks in advance.
    Sunni

    Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
    Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
    Thanks for the above link. http://europe.nokia.com/A4143881
    It's the 2nd one down.....ie
    Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
    Nokia_810_Contacts_Download_S60_3rd.sis
    103.80 KB | English
    This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

  • Can not connect to internet using bluetooth connection with Nokia N95

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

  • No tap/app sounds when bluetooth connects/disconnects

    I've been chasing this for some time now.  What happens is very similar to the posts others shared where the phone is not muted but the apps, notifications, ringer, etc behave silently.  For me, I usually notice the phone vibrating instead of ringing or chiming for a message.  When I unlock, there are no tap sounds as I enter the code and the keyboard is silent.
    Today I noticed the phone went silent as I started my car.  The bluetooth connected to the handsfree in the car and I lost sounds.  I killed the bluetooth on the phone and sounds were restored.  Something is wrong because it also happens when I connect my Jawbone headset, too.  Interestingly, when I use the in-car or headset bluetooth to make a call it operates properly.
    Running 4S 6.1.1

    @SoCalJake
    I've had this problem as well. I bought a Bluetooth keyboard at Christmas and have not had any sounds from my phone other than it vibrating since. I don't know if Apple is aware of the issue or not but disabling the Bluetooth feature when I do not need it seems to have resolved it.

  • Bluetooth Headphones: Error Connecting to Headset

    I am having issues with a pair of MeElectronics AirFi Venture Bluetooth Headphones that I would like to use with my Windows 7 Dell Latitude E6430 laptop. I am able to pair them with the machine, but when I open the Bluetooth control panel and hit connect,
    I get a message that says, "Error connecting to headset. Please retry this operation." I have tried: 
    Removing and re-pairing the headset. 
    Restarting the machine. 
    Removing and Reinstalling the latest drivers from Dell. 
    Installing Broadcom Bluetooth software. 
    Adjusting the services prior to pairing the headset. 
    After all of these, I still get the same error message. I am able to pair the headset with my phone and tablet, with both able to broadcast to it. 
    Any thoughts?
    Dan

    Hi,
    Do you have other bluetooth devices? Are you able to pair them with your Windows 7 Dell laptop? Please make sure to turn on discoverable mode. And have you checked the driver for the bluetooth adapter? And If you're using a bluetooth adapter
    via usb port, try another port or reinstall the driver for usb controller.
    Some troubleshooting in the link below might be helpful
    Troubleshoot problems with Bluetooth enabled devices
    http://windows.microsoft.com/en-hk/windows-vista/troubleshoot-problems-with-bluetooth-enabled-devices 
    As Arnav Sharma mentioned, it's also recommended to contact the Headphone manufacturer.
    Yolanda Zhu
    TechNet Community Support

  • Nokia headset BH 905i - Bluetooth connection

    Hello,
    I can not connect my headset Nokia BH 905i to my computer HP Pavilion dm3-1121ez Entertainment Notebook PC. I did download and install all the software at ; http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=4146810&
    but it still does not connect.
    My laptop will simply not see my Nokia BH 950i. My Nokia BH 905i works fine because I use it all the time with my Packard Bell laptop. It just will not connect to my HP Pavilion dm3-1121ez laptop ( when i press "add a Device" it will not show up).
    And I have the SAME PROBLEM WITH MY Nokia 3720 classic.
    I did just bye a Nokia 3720 classic mobile phone to connect to my headset BH 905i.
    They say that it is compatible on the Nokia internet page :
    http://www.nokia.ch/produits/accessoires/tous-les-accessoires/kits-oreillettes/kits-oreillettes-blue...
    BUT IT DOES NOT WORK, I CAN NOT CONNECT.
    (( Nokia 3720 classic - to - BH 905i ))
    Why ?
    So it will not connect to my second computer and now to my mobile phone ?
    How can that be ?
    It looks like if I was lucky one time out of three. ( Is this a joke ? )
    What can it be ? My Bluetooth seams to work just fine, on my laptop it sees all the mobile phones of my neighbors but will not see my Nokia bluetooth headset. All my driver are well installed, at least it looks like it.
    And my Nokia OS version is up to date, that is at least what it says on the nokia internet page when i checked and Nokia Ovi Suite give the same result.
    http://europe.nokia.com/appmanager/UnitedStatesEnglishEUROPE_NOKIA_COM_3/Get_support;JSESSIONID_NCOM...
    Can somebody help ?
    Do I have to send my BH 905i back to Nokia and ask them why 2 time of 3 it will not work when it is supposed to work ?
    Thanks in advance for your help.

    Sorry my mistake. It works fine !
    Just the way of connection to a new device is not the same, the second time, then the first time. (I don't know why ?)
    1) You have to stop connection (witch is normal)
    2) Then you have to press for 5 sec the button (when it is green, what means already that it is searching, at least in my mind; since green = searching and blue = connection). But no, the second time fast blue = searching.
    That is what I did not get. But it is in the manual, so it is my mistake.
    Still Nokia should not change colors. Give one color for connection-search and one when it is connected. And for sure don't change them.
    I still really like this headset, and think that Nokia did a great job by making it. I use it a lot. So I am really happy with it.
    For now nothing comes close to it. Since it has bluetooth, noise canceling, and a microphone(s).
    The sound quality is good too.
    Keep producing that kind of headsets. We love it !

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • HT201401 no music audio through headset when connecting to car or stereo

    hello, Im not getting any music audio through the headset when connecting to my car or stereo I can hear iPhone noises though. I'm not having the same problem with iPhone earphones but dont think its lead compatability as both leads have worked fine until yesterday. i have tried updating and resetting my phone and no joy. Any ideas please as this is quite frustrating?

    as stated then the ios devices does not support connecting by usb to anything but a computer or the ac charger
    it does not work with usb mass stroage driver which devices such as stereos which have usb conenctors rely on
    the rest of the smartphones and tablets is quiting that feature too
    suppose they all feel the disc mode is too often used for copying media between people without the rights to play it

  • I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

    I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

    You are a genius! Thank you so much; my LG HBS700 now works with my iPhone 5. It is so wonderful that there is this facility for people to help each other. And it is so agrivating that there are these mysterious, unexplained, magic tricks necessary to make my phone work. Do you happen to know how the button combination resolved the Bluetooth issue? What was the Bluetooth problem and how did this fix it. Again thank you for passing this on.

  • I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

    I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

    You need to put the headset into pairing mode. The phone should then see it even though you have done the forget this device.

Maybe you are looking for

  • Printing in Illustrator 5 with a file created in Illustrator 4-crash!

    I have a brand new system running on Snow Leopard (10.6.2). Most of the files I'm working on were created in Creative Suite 4. So when I go to open a file created in a Illustrator 4 program in my new Illustrator 5 program, it crashes when I go to fil

  • How to get slide change without a noise like a camera shot?

    I have imported a PP2013 slideshow into CP 8. The animation is working correct. But when the slide changes to the next one, there is a noise lik a camera shot. Where can I eliminate that, Thanks

  • ORA-600 during Apply of patch 3.1.2.00.02

    I receice during installation of ApEx patch 3.1.2.00.02 following errors in the apxpatch.log ERROR at line 1: ORA-00600: internal error code, arguments: [kokegPinLob1], [], [], [], [], [], ORA-06512: at line 548 ERROR at line 1: ORA-00600: internal e

  • My finder don't open and desktop dissapear

    Hi All My finder don't open and all files in desktop (including HD) dissapeared. Need urgent help Thanks

  • Planning Unit stuck

    Good Afternoon, We are having an issue where when eccluding a planning unit in tree view, all units seem to be excluded. However when going into flat view, I see the main top level entity "Total Entities" 6 times and 4 of the instances show it as "Fi