N95 TV-Out problems

Hi Guy's, Here's hoping someone can help!
I've seen several threads regarding this problem, but I cannot workout what the solution is.
Basically the TV-Out cable function no longer works with my N95. When the phone was new, (6 months ago) I tried it and I recall it working fine. Now if I plug the cable into the TV first I get an "Enhancement Not Supported" message when I plug into the phone. On the flip side if I plug into the phone first then the TV I get the "Use Phone Microphone" message, However the picture is screwed up and there is a buzzing noise from the TV.
I've tried the Headset and it works fine.
Any Ideas??
Thanks

N95 TV-Out problems
Hello every body
I found a solution just do the same thing in the attached photo.
Just 1 thing dont but the hole pin inside the phone (check that photo I attached and you will see) its work with me now.
(Sorry for my rusty english)
Attachments:
N95.JPG ‏35 KB

Similar Messages

  • Time out problem in BPS

    BPS friends,
    We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
    We are on BW-BPS 3.5.
    How can I solve this time out problem? Please respond to me.

    Hi Pat,
    How many record did you copy ??
    Could you restrict the copy in not 1 package ??
    Package per package ...
    I suggest you ..
    e.g. you have restriction by a 0CALMONTH / something ..
    Then,
    You can copy e.g. for January to March, then March to August, etc.
    You can automate it by planning sequence.
    Hopefully it can help you a lot.
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • AirTunes with AirportExpress cut or drop out problems - my solution...

    I buyed 2 of the Airport Extreme one month ago (Firmware 6.3, Itunes 7.1.1), never got them working fine, till yesterday...
    I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
    I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
    In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
    I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
    I hope this will help others with the cut or drop out problem. If you have a working AirTunes system, please post your setup. Mostly I'm interested in a Setup with working WPA...

    Thanks, I hope I can help others with this annoying problem...
    Sorry, I forgot to write about the RF Interference. Belive me, I spent hours and hours searching for a solution in the Internet and every checkbox the Admin utility offered me to try out... I'm working as a system engineer, and supporting computer systems since the early 90ties, so I'd say I have a bit knowledge about all the networking, WLAN, Audio... In school we had the Apple Mac I with the 12" monochrome monitor and appletalk for networking quite funny!
    But back to the RF interference: At the moment I activated it on both AX I own. I have a microwave, wireless phone and I'm living in a Area with many WLAN access points. I can choose between 6 networks!
    I'm the only one with a network higher than channel 6, so this area is clean at least.
    As my AirTunes do work at the moment, I'm not going to try if I could also deactivate it.
    Next step is to try if I can connect the AX Router to the internet. A connection to my ADSL router should do that, but up to now I had very strange behavior when plugging in a ethernet cable to the AX. If this will work, it will be my final solution, at the moment I only see it as a workaround...

  • TV OUT Problem this is how I solved.

    Well, first of all I cannot  guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
    How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.
    The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20,   , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.
    The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT).  The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.
    Than It came the must boring part.  ;(  I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):
    Nvidia 28.32. work with nview.
    nvidia win-xp-2k-2835 work with nview.
    nvidia win-xp-2k-2880 doesnt work with nview.
    nvidia win-xp-2k-2890 doesnt work with nview.
    nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
    nvidia win-xp-2k-2920 doesnt work with nview.
    nvidia win-xp-2k-2942 doesnt work with nview.
    nvidia win-xp-2k-2960 doesnt work with nview.
    nvidia win-xp-2k-2980 doesnt work with nview.
    nvidia Win2k-xp-29.90 doesnt work with nview.
    nvidia W2K_XP_V29.90 doesnt work with nview
    nvidia Win2k-xp-3020 doesnt work with nview
    nvidia Win2k-xp-3030 doesnt work with nview.
    nvidia Win2k-xp-3082 doesnt work with nview.
    I got all this drivers from a really nice site: 3dchipset .
    Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.
    And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once.  X(
    That all folks

    Yes, that's how iMessage should work. Try this. Sign out of Messages on both devices. Sign back in on your phone and wait until it activates. Go to Settings>Messages>Send & Receive. Make sure Start New Conversations From is set to our mobile number. Then sign in on your iPad using the same Apple ID as you use on your phone. Once it activates, verify the settings. I've got iMessage syncing across my iPhone, iPad and MBA. Every once in a while, there's a glitch but rarely.
    Best of luck.

  • The Video Out Problem...Fixed?

    I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
    It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
    I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

    I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
    That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
    What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
    ted.h.

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

  • IPod Nano Grey Out Problem in iTunes??

    I purchased my iPod Shuffle last year. I installed iTunes in my Window PC and purchased music via the music store.
    A month ago, I purchased a iPod Nano, I added the iPod Nano to iTunes. iTunes will update my iPod Nano automatically when I connect it to my computer.
    However, all the songs in my iPod Nano menu in iTunes appear 'grey out'. I can't do anything like delete, play them etc??
    Can anybody advise me how to solve this 'grey out' problem?
    Thanks,
    Jacky

    Welcome to Apple Discussions!
    If you update automatically, the songs are grayed out, because the songs should be on your computer.
    To delete songs, you can uncheck the songs/podcasts you don't want on your iPod in iTunes. Then connect your iPod to the computer. When it appears in iTunes, go to edit-->preferences. Click the iPod tab, then the music tab under that. Check "Only Update Checked Songs" and click OK. Only checked songs will be put onto the iPod.
    See this for more ideas/tips...
    Deleting songs or playlists from your iPod
    To be able to play songs on the iPod through the computer, delete songs only on the iPod (without having to check and uncheck), and to have songs not grayed out, you would have to manually update. Songs would no longer automatically update onto the iPod. You would have to drag new songs that you want on your iPod onto it (through iTunes)...
    Managing Your Songs Manually
    btabz

  • Are you ever going to fix the "You've been signed out" problem?

    I've gone through forums and your trouble shooting page and I've found a lot of angry customers over thus Creative Cloud "You've been signed out" problem. Fortunately for me, I'm not a customer. I installed it so I could download a trial or premiere with the intention to buy, but now I don't need the trial because this is issue has made up my mind. But I am still curious if you're ever going to fix it?

    This is a user forum please open a problem report over at http://feedback.photoshop.com/photoshop_family/

  • I have Photoshop CS purchased many years ago for a LOT of money.  Other day went to use it, got msg. "computer configuration changed, need to re-activate".  Tried that for days, didn't work.  Cannot call ANYONE to find out problem.  Am not very computer l

    I have Photoshop CS, purchased many years ago for a LOT of money.  Other day went to use it, got msg. "computer configuration changed, need to re-activate.  Tried that for days, didn't work.  Cannot call ANYONE to find out problem.  Am not very computer literate, so don't understand what that means.  LOVE the CS program and know how to use it, so don't want to have to learn something new.  Don't know what to do.  Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS.  CAN SOMEONE PLEASE HELP!!!     

    jd49034389 wrote:
    down further there is a Photoshop CS2, do I just do that one?
    Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
    Good luck.
    --OB

  • Error out problems with measuring frequency VI

    I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
    Attachments:
    Measure Frequency VI error.vi ‏27 KB

    This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
    Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
    Hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Time out problem while uploading large bpel processes into oracle soa suite

    Hi everyone,
    I'm using oracle soa suite 10.1.3.4.0 and I'm encountering time out problem while trying to upload a 5MB bpel process into my bpel process server located in the LAN network. The error is coming from apache common file upload.
    Is there a way to increate the connection time out for oc4j to avoid this problem?
    Thanks for any help.
    Regards
    Esfand

    Hi Marc.
    Thanks for your reply. I increased the transaction manager time-out but still I have the same problem. I believe this is something related to oc4j settings and related to upload bpel process. here is my stack trace output:
    79: A problem occured while connecting to server "192.168.0.12" using port "8888": bpel_JazbModaresJadidBPEL_1.0.jar failed to deploy. Exception message is: javax.transaction.RollbackException: Timed out
    at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:94)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:324)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
    at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
    javax.transaction.RollbackException: Timed out
    at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:152)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
    ... 25 more
    Caused by: javax.transaction.RollbackException: Timed out
    at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:664)
    at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
    at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
    at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
    at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:137)
    ... 33 more
    Total time: 4 minutes 30 seconds
    The bpel jar file is about 2MB and is uploaded from my machine located in the same LAN.
    Any hints?
    Thanks
    Esfand

  • Weird TV OUT problem

    Hi everybody.
    I was wondering if anybody could help me out with a TV OUT problem I am having.  I have a FX5200 video card and when I hook the VCR to my computer and boot it up, it does show on the television until the desktop appears and then all I get is a blue screen.  (I have to run it through the VCR because my television doesn't have the ports for the cord/s)  The VCR is hooked up correctly to the television, and I am on the A/V channel, but for some reason my TV stops showing what is on the computer after Windows boots up.  I have Windows 98.
    Any ideas??
    Thanks so much!

    You know what, I honestly have no idea if it's set to clone or not.   I wasn't around when we installed the drivers and set everything up for the card, so that's definitely something to look into.  Is that just in the video card properties?

  • Toshiba 48L1433DB - USB time out problems

    My USB Ports are not shown on my Source list and I have a "time-out" problem.
    If I put a stick in either USB port the media page loads automattically and everything works perfectly but then switches off after an hour or so (on-screen message shows empty port has switched on).
    I then have to disconnect the stick and reload it before I can start watching again (Have to fast forward to place where disconnect happened but have to stop every now and then to prevent time out re-occuring)
    Very puzzling

    Originally Posted by [email protected]
    My USB Ports are not shown on my Source list and I have a "time-out" problem.
    If I put a stick in either USB port the media page loads automattically and everything works perfectly but then switches off after an hour or so (on-screen message shows empty port has switched on).
    I then have to disconnect the stick and reload it before I can start watching again (Have to fast forward to place where disconnect happened but have to stop every now and then to prevent time out re-occuring)
    Very puzzling
    At first you should make sure, that it is not caused by the stick type and/or file format.
    Did you check with a stick from another vendor ? Also, does it happen with every file type, or related to certain formats ?

  • N95 in Emulator is Fine but N95 device has problem

    Hi all,
    I am creating a video based application for N95 which enable
    running video(.3gp) in normal to rotate(90 degree) and display in
    full mode so i tried it with Adobe Device Central's Emulator and it
    is working fine (Note: Emulator was update on 24th sept and adobe
    has released update on 22nd sept)
    but in actual device it is not working fine (means rotation
    is now happening) also i have updated N95's firmware from 21.0.016
    to 30.0.015. my N95 has flash lite 3.0 standalone player too but
    problem is same, kindly look at this..
    Device : N95 with 1GB
    Firmware : 30.0.015
    Flash Lite Player: 3.0
    OS: Symbian 9.2
    thanks
    Maneesh Panwar

    Hi Maneesh,
    Thanks for pointing this out, we'll look at it.
    Mark

  • N8 hdmi out problem

    Hello, i come here with a problem with my Nokia N8. The hdmi tv-out playback isn't working smoothly, I attached a video so you can see my problem. I hope you can help me solve this problem.
    http://youtu.be/VtbN5Aaa1Ls
    Also I am looking for an app that clears the ram memory usage. 
    Thanks in advance and sorry for my bad english.

    If the video was taken with the phone, so no file type issues, then I'd suggest eliminating the low ram issue by doing the battery out reset, power off, hood purer button for about 8 seconds until you feel 3 vibrations, wait 30 seconds before restarting, leave it 5 minutes to settle then use ramblow or Appstop to shut all processes.
    Then try the video.
    If still no good, I'd try the two factory reset options next, they are in /settings/phone/phone management.
    Lastly you could try reinstalling the firmware using nokia suite, check for updates then take the reinstall option. I'm assuming the phone is up to date all ready.
    Good luck because the video out is a great feature.
    N95 (RM159) V31.0.017, N8 (RM596) Belle 111.040.1511

Maybe you are looking for

  • New MBP and Migration Assistant

    I just ran Migration Assistant on my new MBP bringing over everything from my old iBook. I just noticed that the iLife apps are the same versions from my iBook. Isn't Migration Assistant supposed to account for that, and flag the older apps? Is there

  • How do I change Middle Click to normal Middle Click instead of the Scroll on the Helix

    Hi, I just bought the Lenovo Helix with Windows 8.1 and I've been trying to disable this auto-scroll or touch-scroll function that comes on by default on UltraNav. On my old X220 with Windows 7, I can just go to Mouse-> UltraNav -> Settings -> Neithe

  • Not getting the Connect to join the shared review notice in Adobe Reader 9

    I click on my e-mail and entering Shared review but I am not getting the Adobe Acrobat Shared Review Window that asks me to click to connect to join the Shared Review

  • Installation Reporting Services Point Role

    I have following configuration SCCM 2012 SP1 (Clean installation) |  SQL 2008 SP3 CU4 Named instances | OS: Windows 2008 SP2 SQL Cluster for CAS | Dedicated SQL Server for each primary site  (All my roles are separated on dedicated servers) For SSRS

  • Saving a form as uneditable PDF document

    I have created a form in FormsCentral. Once the form is filled out I need to save the form as an uneditable PDF file. How do I lock the form after it is complete and save as an uneditable form?