N97- cant see contacts

ive had the phone for a while .. but recently the device has been going down hill ..
recently i cant see any of my contacts. instead of storing the contact on my sim .. i have been saving on my cells memory ... i tried to click on which memory to open and i chose both the sim and memory .. in the memory it shows i have 86 contacts ... but none of them show up
my contacts do show up on call log as well as text messages in their contact names ... or if i type the number in and i call, i can see it as my contact name ...
it just doesnt appear in the contact section ... or when i try and find a contact to text message
i dont understand wahts wrong ... what should i do? 
Message Edited by drivnovrdaedge on 01-Sep-2009 06:44 PM

ok so i ended up updating the phone to the newer software ... even thought i had the fears of all my info being erased ..
after the install my info was still in the phone (including music, notes, and phone call record which also included my conacts. 
as i try to open the contact page, it opens but nothing appears .. only the bottom and top section but nothing in the center ... u can sometimes see the preivious window that was open or the wall paper with application running .. 
help please!!!!!

Similar Messages

  • Cant see contact list of memory card

    in 5800 cell there is memory card, i can see other things of memory card but in contact list there is no list of memory card
    And other thing is that i want to make all settings like new bratd cell so what should i do?

    mitbmistry wrote:
    in 5800 cell there is memory card, i can see other things of memory card but in contact list there is no list of memory card
    And other thing is that i want to make all settings like new bratd cell so what should i do?
    The Contacts are saved either on the SIM or in Phone Memory ..
    ..and since the code provided by aspergerguy will wipe user data (as already mentioned in that post)..back-up your important data before the Reset ..

  • Cant see contact pic when i make a call

    Hi When i make a call from new 5S, the picture i have saved for a contact is not displayed when i make a call.... it appears blurred in the back ground..... on other cases i get a small circle in the top right corner. Id there any way of getting consistency

    it will be a feature in the new iOS 8.  you will have to wait until then

  • BBM version 6.1.0.49 - my bbm contacts cant see my Dp when i change it (Bold 9900 )

    Hello,
    I just bought my blackberry a few days go and I can’t see the display image of BBM contacts and they also cant see mine.
     The only time I could see their display image is when they change it.
     I tried changing my and they still can’t see it.
     I have tried the following
    1.       Updated OS to version 7.0.0 bundle 2406
    2.       Updated BBM to v6.1.0.49
    3.       Registered by BBM via the HRT
    Go to Options
    Select the Advance Options
    Select Host Routing Table
    Choose the “BOLD” point
    Press your BB menu
    Select Register Now
    Then it would be showing some message, “Your Handheld registered with the wireless network..”
    Restart your BlackBerry devices.
     4.       Rebooted & Restarted after each update
    5.       Removed the battery and restarted
    6.  Used Desktop manager to delete and reinstall BBM
    7. Downgraded BBM version from 6.1.0.49 to 6.0.032 to 6.0.0.25
    8. Downgraded OS system from Version 7 latest to the version 7 before it
    9. Deleted and reinstalled app world
    10. in fact i have done everything i can possibly think of and still have the same problem and result
    At first I thought this would be ok after adding several BBM contacts, but I have added up to 10 contacts today and still cant see their display image and they too cant see mine.
     I would really appreciate assistance on this.
     Kind regards
    Olu
     BB PIN: 28E6846A
    Location: United Kingdom
    Network provider: Orange

    i also have the same problem with my bold 9900, my contacts can't see my display picture. anyone with an idea of what to do? help desperately needed.
    tal.

  • TS4268 I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see my facetime in setting noicifation center. and i tried to check at my contact i didnt see also face

    I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see only my facetime in setting>noicifation center. and i tried to check at my contact i didnt see also facetime in lower part. please help me,. thank you

    Hi LifeGood,
    Thanks for using Apple Support Communities.  In iOS, FaceTime is not a separate app and FaceTime calls can be made as described here:
    iOS: Using FaceTime
    http://support.apple.com/kb/ht4319
    How do I make a FaceTime call?
    You can make a FaceTime call in multiple ways, depending on your device:
    iPhone 4 or later: You can place a FaceTime call using the following apps:
    Phone: While on a phone call, you can tap the FaceTime icon to invite the other party to a FaceTime call.
    Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
    iPad 2 or later, iPad mini, iPod touch (4th generation) or later, and FaceTime for Mac: You can place a FaceTime call using the following apps:
    FaceTime: Place a FaceTime call using your contacts list.
    Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
    Note: There is no FaceTime app on iPhone. Use the Phone app instead.
    Cheers,
    - Ari

  • When I import my contacts from the sim they do not save and I cant see how to save them?

    When I import my contacts from the sim they do not save and I cant see how to save them? Anyone ideas?

    Hi. I saved the contacts from previous phone onto the sim. I'm going to 'Import SIM Contacts". After I've imported the contacts and go to Contatcs after that they are all there, but they seem to disappear again as if they're not saved. This happens no matter how many times I import them.

  • Cant see new contacts request and the other person...

    Basic its this.... i cant see my girlfriends contact request and she cant see mine... ive tried uninstall update, everything but nothing is working! WHY?!

    restart your mobile for couple of time syn with itunes if it doesn't work restore your iphone

  • I cant see the names of my contacts when i recieve a call, i can only see the number of the caller ?

    i cant see the names of those calling me on my iphone 4s

    If you do not see this at the top of the display I would try a reset.
    Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • IPsec over GRE not coming up, cant see why, debug inc...

    Hi all,
    Rattling my brains here, as far as i can see everything is fine, it should be working, but for some reason its not, and i cant see anything in the debug thats hinting to the reason why, can anyone help me out with this?
    im normally good at this stuff, but this time its got me!
    the hub config works with many 3 other spokes configured in the same way!
    Thanks for any help guys
    SPOKE
    crypto isakmp policy 10
    encr aes 256
    authentication pre-share
    group 5
    crypto isakmp key xxxxxxxxxxxxxxxxx address xxx.xxx.xxx.xx3
    crypto isakmp keepalive 10 4
    crypto isakmp nat keepalive 30
    crypto ipsec transform-set AES-256_SHA esp-aes 256 esp-sha-hmac
    mode transport
    crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
    mode transport
    crypto ipsec profile GRE_TUNNEL
    set transform-set AES-SHA
    archive
    log config
      hidekeys
    ip ssh version 2
    interface Tunnel1
    bandwidth 100000
    ip address 192.168.100.103 255.255.255.0
    no ip redirects
    ip mtu 1440
    ip nhrp authentication xxxxxx
    ip nhrp map 192.168.100.1 xxx.xxx.xxx.xx3
    ip nhrp map multicast xxx.xxx.xxx.xx3
    ip nhrp network-id 100
    ip nhrp holdtime 450
    ip nhrp nhs 192.168.100.1
    ip tcp adjust-mss 1360
    qos pre-classify
    tunnel source Vlan100
    tunnel mode gre multipoint
    tunnel key 100
    tunnel protection ipsec profile GRE_TUNNEL
    interface ATM0
    no ip address
    shutdown
    no atm ilmi-keepalive
    pvc 1/50
      dialer pool-member 1
      protocol ppp dialer
    dsl operating-mode auto
    interface FastEthernet0
    switchport access vlan 100
    interface FastEthernet1
    switchport access vlan 103
    interface FastEthernet2
    switchport access vlan 103
    interface FastEthernet3
    switchport access vlan 103
    interface Vlan1
    no ip address
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    shutdown
    interface Vlan100
    ip address dhcp
    ip nbar protocol-discovery
    ip nat outside
    ip inspect UserTraffic out
    ip virtual-reassembly
    interface Vlan103
    ip address 192.168.103.254 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    router eigrp 100
    network 192.168.100.0
    network 192.168.103.0
    auto-summary
    no ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 192.168.1.254
    no ip http server
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list OUTBOUND interface Vlan100 overload
    ip access-list extended INBOUND
    deny   tcp any any eq 22
    deny   tcp any any eq telnet
    permit ip any any
    deny   ip any any
    ip access-list extended OUTBOUND
    permit ip any any
    deny   ip any any
    HUB
    crypto isakmp policy 10
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 15
    encr 3des
    authentication pre-share
    crypto isakmp policy 20
    encr 3des
    authentication pre-share
    group 2
    lifetime 7800
    crypto isakmp policy 50
    encr aes 256
    authentication pre-share
    group 5
    crypto isakmp key xxxxxxxxxx address 0.0.0.0 0.0.0.0
    crypto isakmp fragmentation
    crypto isakmp keepalive 10 4
    crypto isakmp nat keepalive 30
    crypto ipsec security-association idle-time 7800
    crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
    mode transport
    crypto ipsec transform-set AES_MD5_TUNNEL esp-aes 256 esp-md5-hmac
    crypto ipsec profile DataTunnels
    set transform-set AES-SHA
    interface Tunnel1
    bandwidth 1000
    ip address 192.168.100.1 255.255.255.0
    no ip redirects
    ip mtu 1400
    no ip next-hop-self eigrp 100
    ip nhrp authentication xxxxxxxxxxx
    ip nhrp map multicast dynamic
    ip nhrp network-id 100
    ip nhrp holdtime 450
    ip tcp adjust-mss 1360
    no ip split-horizon eigrp 100
    qos pre-classify
    tunnel source Dialer1
    tunnel mode gre multipoint
    tunnel key 100
    tunnel protection ipsec profile DataTunnels
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    pvc 1/50
      dialer pool-member 1
      protocol ppp dialer
    interface FastEthernet0
    description INTERNAL LAN
    switchport access vlan 201
    interface FastEthernet1
    switchport access vlan 201
    interface FastEthernet2
    switchport access vlan 201
    interface Vlan201
    ip address 192.168.201.254 255.255.255.252
    ip nat inside
    ip virtual-reassembly
    interface Dialer1
    ip address negotiated
    ip access-group INBOUND in
    ip nbar protocol-discovery
    ip nat outside
    ip inspect UserTraffic out
    ip virtual-reassembly
    encapsulation ppp
    ip tcp adjust-mss 1300
    load-interval 30
    no cdp enable
    router eigrp 100
    network 192.168.100.0
    network 192.168.201.0
    redistribute static
    router nhrp
    router odr
    ip nat inside source list OUTBOUND interface Dialer1 overload
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip access-list extended INBOUND
    permit ip 192.168.250.0 0.0.0.15 192.168.101.0 0.0.0.255
    deny   tcp any any eq 22
    deny   tcp any any eq telnet
    permit tcp any host xxx.xxx.xxx.xx3 eq www
    permit tcp any host xxx.xxx.xxx.xx3 eq 443
    permit tcp any host xxx.xxx.xxx.xx3 eq smtp
    permit udp any host xxx.xxx.xxx.xx3 eq isakmp
    permit esp any host xxx.xxx.xxx.xx3
    permit ahp any host xxx.xxx.xxx.xx3
    permit udp any host xxx.xxx.xxx.xx3 eq non500-isakmp
    deny   ip any any
    permit ip any any
    ip access-list extended OUTBOUND
    permit tcp any any eq smtp
    permit tcp any any eq 443
    permit ip 192.168.201.0 0.0.0.255 any
    deny   ip any any
    DEBUG
    CWT-DATA#sh ip nhrp detail
    192.168.100.1/32 via 192.168.100.1, Tunnel1 created 1w5d, never expire
      Type: static, Flags: used
      NBMA address: xxx.xxx.xxx.xx3
    CWT-DATA#sh crypto isakmp sa
    IPv4 Crypto ISAKMP SA
    dst             src             state          conn-id slot status
    xxx.xxx.xxx.xx3     192.168.1.7     MM_NO_STATE       2821    0 ACTIVE (deleted)
    Jul  4 12:53:35.551: ISAKMP:(2822):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:53:45.553: ISAKMP:(2822): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:53:45.553: ISAKMP:(2822):peer does not do paranoid keepalives.
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
    Jul  4 12:53:45.553: ISAKMP: Unlocking peer struct 0x835CCCE8 for isadb_mark_sa_deleted(), count 0
    Jul  4 12:53:45.553: ISAKMP: Deleting peer node by peer_reap for xxx.xxx.xxx.xx3: 835CCCE8
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting node -32418685 error FALSE reason "IKE deleted"
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting node 2092182627 error FALSE reason "IKE deleted"
    Jul  4 12:53:45.553: ISAKMP:(2822):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
    Jul  4 12:53:45.553: ISAKMP:(2822):Old State = IKE_I_MM5  New State = IKE_DEST_SA
    Jul  4 12:53:45.585: ISAKMP:(0): SA request profile is (NULL)
    Jul  4 12:53:45.585: ISAKMP: Created a peer struct for xxx.xxx.xxx.xx3, peer port 500
    Jul  4 12:53:45.585: ISAKMP: New peer created peer = 0x835CCCE8 peer_handle = 0x800025C0
    Jul  4 12:53:45.585: ISAKMP: Locking peer struct 0x835CCCE8, refcount 1 for isakmp_initiator
    Jul  4 12:53:45.585: ISAKMP: local port 500, remote port 500
    Jul  4 12:53:45.585: ISAKMP: set new node 0 to QM_IDLE
    Jul  4 12:53:45.585: ISAKMP: Find a dup sa in the avl tree during calling isadb_insert sa = 8333DA70
    Jul  4 12:53:45.585: ISAKMP:(0):Can not start Aggressive mode, trying Main mode.
    Jul  4 12:53:45.585: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-07 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-03 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-02 ID
    Jul  4 12:53:45.585: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    Jul  4 12:53:45.585: ISAKMP:(0):Old State = IKE_READY  New State = IKE_I_MM1
    Jul  4 12:53:45.589: ISAKMP:(0): beginning Main Mode exchange
    Jul  4 12:53:45.589: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_NO_STATE
    Jul  4 12:53:45.589: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.653: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_NO_STATE
    Jul  4 12:53:45.653: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Jul  4 12:53:45.653: ISAKMP:(0):Old State = IKE_I_MM1  New State = IKE_I_MM2
    Jul  4 12:53:45.653: ISAKMP:(0): processing SA payload. message ID = 0
    Jul  4 12:53:45.653: ISAKMP:(0): processing vendor id payload
    Jul  4 12:53:45.653: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
    Jul  4 12:53:45.653: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
    Jul  4 12:53:45.653: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.653: ISAKMP:(0): local preshared key found
    Jul  4 12:53:45.653: ISAKMP : Scanning profiles for xauth ...
    Jul  4 12:53:45.653: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
    Jul  4 12:53:45.653: ISAKMP:      encryption AES-CBC
    Jul  4 12:53:45.653: ISAKMP:      keylength of 256
    Jul  4 12:53:45.653: ISAKMP:      hash SHA
    Jul  4 12:53:45.653: ISAKMP:      default group 5
    Jul  4 12:53:45.653: ISAKMP:      auth pre-share
    Jul  4 12:53:45.653: ISAKMP:      life type in seconds
    Jul  4 12:53:45.653: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
    Jul  4 12:53:45.657: ISAKMP:(0):atts are acceptable. Next payload is 0
    Jul  4 12:53:45.657: ISAKMP:(0):Acceptable atts:actual life: 0
    Jul  4 12:53:45.657: ISAKMP:(0):Acceptable atts:life: 0
    Jul  4 12:53:45.657: ISAKMP:(0):Fill atts in sa vpi_length:4
    Jul  4 12:53:45.657: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
    Jul  4 12:53:45.657: ISAKMP:(0):Returning Actual lifetime: 86400
    Jul  4 12:53:45.657: ISAKMP:(0)::Started lifetime timer: 86400.
    Jul  4 12:53:45.657: ISAKMP:(0): processing vendor id payload
    Jul  4 12:53:45.657: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
    Jul  4 12:53:45.657: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
    Jul  4 12:53:45.657: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Jul  4 12:53:45.657: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM2
    Jul  4 12:53:45.657: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_SA_SETUP
    Jul  4 12:53:45.657: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.661: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    CWT-DATA#
    Jul  4 12:53:45.661: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM3
    Jul  4 12:53:45.813: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_SA_SETUP
    Jul  4 12:53:45.817: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Jul  4 12:53:45.817: ISAKMP:(0):Old State = IKE_I_MM3  New State = IKE_I_MM4
    Jul  4 12:53:45.817: ISAKMP:(0): processing KE payload. message ID = 0
    Jul  4 12:53:45.989: ISAKMP:(0): processing NONCE payload. message ID = 0
    Jul  4 12:53:45.989: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): vendor ID is Unity
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): vendor ID is DPD
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): speaking to another IOS box!
    Jul  4 12:53:45.993: ISAKMP:received payload type 20
    Jul  4 12:53:45.993: ISAKMP (0:2823): NAT found, the node inside NAT
    Jul  4 12:53:45.993: ISAKMP:received payload type 20
    Jul  4 12:53:45.993: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Jul  4 12:53:45.993: ISAKMP:(2823):Old State = IKE_I_MM4  New State = IKE_I_MM4
    Jul  4 12:53:45.993: ISAKMP:(2823):Send initial contact
    Jul  4 12:53:45.993: ISAKMP:(2823):SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
    Jul  4 12:53:45.993: ISAKMP (0:2823): ID payload
            next-payload : 8
            type         : 1
            address      : 192.168.1.7
            protocol     : 17
            port         : 0
            length       : 12
    Jul  4 12:53:45.993: ISAKMP:(2823):Total payload length: 12
    Jul  4 12:53:45.997: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    Jul  4 12:53:45.997: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.997: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    CWT-DATA#
    Jul  4 12:53:45.997: ISAKMP:(2823):Old State = IKE_I_MM4  New State = IKE_I_MM5
    CWT-DATA#
    Jul  4 12:53:55.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:53:55.794: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:53:55.794: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:53:56.294: ISAKMP (0:2823): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
    Jul  4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:53:56.294: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:53:56.294: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:05.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:05.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:05.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:06.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 2 of 5: retransmit phase 1
    Jul  4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:06.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:06.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:15.797: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:15.797: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:15.797: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:16.297: ISAKMP (0:2823): incrementing error counter on sa, attempt 3 of 5: retransmit phase 1
    Jul  4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:16.297: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:16.297: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:19.537: ISAKMP: set new node 0 to QM_IDLE
    Jul  4 12:54:19.537: ISAKMP:(2823):SA is still budding. Attached new ipsec request to it. (local 192.168.1.7, remote xxx.xxx.xxx.xx3)
    Jul  4 12:54:19.537: ISAKMP: Error while processing SA request: Failed to initialize SA
    Jul  4 12:54:19.537: ISAKMP: Error while processing KMI message 0, error 2.
    CWT-DATA#
    Jul  4 12:54:25.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:25.798: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:25.798: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:26.298: ISAKMP (0:2823): incrementing error counter on sa, attempt 4 of 5: retransmit phase 1
    Jul  4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:26.298: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:26.298: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:35.555: ISAKMP:(2822):purging node -32418685
    Jul  4 12:54:35.555: ISAKMP:(2822):purging node 2092182627
    Jul  4 12:54:35.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:35.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:35.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:36.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 5 of 5: retransmit phase 1
    Jul  4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:36.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    Jul  4 12:54:36.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#no debug all
    All possible debugging has been turned off

    heres the hub debug
    CWCH#
    *Jul  5 11:58:16.208: ISAKMP: set new node 1382820308 to QM_IDLE  
    *Jul  5 11:58:16.208: ISAKMP:(2116): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 4500 (R) QM_IDLE
    *Jul  5 11:58:16.208: ISAKMP:(2116):Sending an IKE IPv4 Packet.
    *Jul  5 11:58:16.208: ISAKMP:(2116):purging node 1382820308
    *Jul  5 11:58:16.208: ISAKMP:(2116):Input = IKE_MESG_FROM_IPSEC, IKE_PHASE2_DEL
    *Jul  5 11:58:16.208: ISAKMP:(2116):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:47.504: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:47.504: ISAKMP: set new node -146383553 to QM_IDLE  
    *Jul  5 12:02:47.504: ISAKMP:(2120): processing HASH payload. message ID = -146383553
    *Jul  5 12:02:47.504: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -146383553, sa = 0x854A7094
    *Jul  5 12:02:47.504: ISAKMP:(2120):deleting node -146383553 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:47.504: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3C
    *Jul  5 12:02:47.504: ISAKMP: set new node -1398198787 to QM_IDLE 
    *Jul  5 12:02:47.504: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1398198787
    *Jul  5 12:02:47.504: ISAKMP:(2120): seq. no 0x63A1AE3C
    *Jul  5 12:02:47.504: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:47.504: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:47.504: ISAKMP:(2120):purging node -1398198787
    *Jul  5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:02:52.516: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:52.516: ISAKMP: set new node -459292560 to QM_IDLE  
    *Jul  5 12:02:52.516: ISAKMP:(2120): processing HASH payload. message ID = -459292560
    *Jul  5 12:02:52.516: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -459292560, sa = 0x854A7094
    *Jul  5 12:02:52.516: ISAKMP:(2120):deleting node -459292560 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:52.516: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:52.516: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:52.516: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3D
    *Jul  5 12:02:52.516: ISAKMP: set new node -1245354522 to QM_IDLE 
    *Jul  5 12:02:52.516: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1245354522
    *Jul  5 12:02:52.516: ISAKMP:(2120): seq. no 0x63A1AE3D
    *Jul  5 12:02:52.516: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:52.516: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:52.516: ISAKMP:(2120):purging node -1245354522
    *Jul  5 12:02:52.520: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:52.520: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:02:55.636: ISAKMP:(2119):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:55.636: ISAKMP:(2119):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:55.656: ISAKMP:(2119):purging node 926310294
    CWCH#
    *Jul  5 12:02:58.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:58.000: ISAKMP: set new node -1957053939 to QM_IDLE 
    *Jul  5 12:02:58.000: ISAKMP:(2120): processing HASH payload. message ID = -1957053939
    *Jul  5 12:02:58.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -1957053939, sa = 0x854A7094
    *Jul  5 12:02:58.000: ISAKMP:(2120):deleting node -1957053939 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:58.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:58.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:58.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3E
    *Jul  5 12:02:58.000: ISAKMP: set new node -1198504167 to QM_IDLE 
    *Jul  5 12:02:58.004: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1198504167
    *Jul  5 12:02:58.004: ISAKMP:(2120): seq. no 0x63A1AE3E
    *Jul  5 12:02:58.004: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:58.004: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:58.004: ISAKMP:(2120):purging node -1198504167
    *Jul  5 12:02:58.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:58.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:03:03.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:03.000: ISAKMP: set new node 599666073 to QM_IDLE   
    *Jul  5 12:03:03.000: ISAKMP:(2120): processing HASH payload. message ID = 599666073
    *Jul  5 12:03:03.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 599666073, sa = 0x854A7094
    *Jul  5 12:03:03.000: ISAKMP:(2120):deleting node 599666073 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:03.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:03.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:03.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3F
    *Jul  5 12:03:03.000: ISAKMP: set new node 1035716483 to QM_IDLE  
    *Jul  5 12:03:03.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = 1035716483
    *Jul  5 12:03:03.000: ISAKMP:(2120): seq. no 0x63A1AE3F
    *Jul  5 12:03:03.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:03.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:03:03.004: ISAKMP:(2120):purging node 1035716483
    *Jul  5 12:03:03.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:03.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:03:08.008: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:08.008: ISAKMP: set new node 230166927 to QM_IDLE   
    *Jul  5 12:03:08.008: ISAKMP:(2120): processing HASH payload. message ID = 230166927
    *Jul  5 12:03:08.008: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 230166927, sa = 0x854A7094
    *Jul  5 12:03:08.008: ISAKMP:(2120):deleting node 230166927 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:08.008: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:08.008: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:08.008: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE40
    *Jul  5 12:03:08.008: ISAKMP: set new node -1886395474 to QM_IDLE 
    *Jul  5 12:03:08.008: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1886395474
    *Jul  5 12:03:08.008: ISAKMP:(2120): seq. no 0x63A1AE40
    *Jul  5 12:03:08.012: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:08.012: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#no
    *Jul  5 12:03:08.012: ISAKMP:(2120):purging node -1886395474
    *Jul  5 12:03:08.012: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:08.012: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:13.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:13.000: ISAKMP: set new node 841395293 to QM_IDLE   
    *Jul  5 12:03:13.000: ISAKMP:(2120): processing HASH payload. message ID = 841395293
    *Jul  5 12:03:13.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 841395293, sa = 0x854A7094
    *Jul  5 12:03:13.000: ISAKMP:(2120):deleting node 841395293 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:13.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:13.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:13.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE41
    *Jul  5 12:03:13.000: ISAKMP: set new node -820358795 to QM_IDLE  
    *Jul  5 12:03:13.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -820358795
    *Jul  5 12:03:13.000: ISAKMP:(2120): seq. no 0x63A1AE41
    *Jul  5 12:03:13.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:13.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#no debug all
    All possible debugging has been turned off
    CWCH#
    *Jul  5 12:03:13.004: ISAKMP:(2120):purging node -820358795
    *Jul  5 12:03:13.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:13.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE

  • HT201317 iphone4 forced restore.  Cant see my photos on ICloud?  Should I restore factory settings Will I be able to recover my photos after restore?

    Screen locked yesterday x 5 times.  Powered on/off AOK.  Connected to ITunes on windows PC, upgraded OS as suggested, Synch performed, backup halted Out of space?  tried to delete apps from ITunes directly, Error messages "disk is full".  Phone screen now showing ITunes logo and ITunes prompting a Restore of phone.  What should I do?  Will I lose my photos?  I cant see any option to view my photos on ICloud (Contacts appear okay on ICloud) 

    Photos are not available for viewing on icloud and are not backed up to it from a PC or Mac, only from an ios device.  It sounds like your iphone was unable to perform a backup to icloud before going bad (or whatever happened to it).  You'll just have to perfrom a restore to see if any photos come back.
    But the usual advice regarding photos is that you sync photos to the PC periodically as you would photos from a camera.  If you've been doing that, then you'll find copies on the PC.

  • I cant get contacts to show, I enter but it still says no contacts

    I cant get contacts to show, I enter but it still says no contacts

    I can see contacts in facetime but not in the facetime app

  • I have itunes credit card and scrached off the # and cant see it how do i redeem now?

    I have a itunes credit card I scrached the # off and cant see it how do I redeem it now?

    On the bottom of your card, UNDER the barcode, you will se a long number. That is the card serial number.
    Go to apple.com/support/itunes/contact.html to email the iTunes store support.
    Tell them that the redemption code was scratched off, and give them the card serial number. Someone from the iTunes Store will email you back with the cards redemption code.

  • HT201322 How come i cant see the hide buttom in my iphone?

    How come i cant see the hide buttom in my iphone?
    i swipe the item again and again, but nothing comes out, just cant see the hide button......the instuction works in itunes, but in iphone

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • I cant see facebook notifications in the notifications bar on mountain lion?

    i cant see facebook notifications in the notifications bar on mountain lion?

    Hi All,
    Go to System preferences, and click on Mail, Contacts & Calenders. Click on Facebook and sign in.
    Then go back to Notifications and you will see it now says '...share button allows you to post to Twitter and Facebook' --- Check your notification center.
    S

  • Why I cant see all my info on the icloud??

    Why I cant see all my info (that I have on my ipad) in the webpage of icloud?? Even if I just sincronized them...

    You can see the Apple data (contacts, emails, calendars, etc.) but you can't see backups, other app data, etc.  That's how icloud is designed - to see whatever data you want use the appropriate app on your computer or device.

Maybe you are looking for