N97 wlan problem

When my n97 was v20 & 21 i worked with all wlan but when update it to 22 cant do nothing.
n97 connecting to network but No received jut have sent
I'm not her...Never was...Never will be..

Would u mind to enter the Wireless Router configuration screen as Administrator and disable the WEP / WPA encryptions to OPEN mode then try connecting
I'm sure its not ure N97's issue since ure able to connect from other WiFi sources. It's confirmed on the configurations in the WiFi router.
TQ
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

Similar Messages

  • Nokia n97 wlan problems

    Hy!First sorry for my bad English.
    I have nokia n97 and I cant connect to my wlan.
    Everything was ok then yesterday something get wrong because when I want to connect write: web unable to perform operation.
    And sometimens on my screen show something:sistem error
    pleas help)
    Solved!
    Go to Solution.

    Hi Aurora,
    Thank you for your first post and a big welcome to the Nokia discussion forums. And no need to apologise for your English its perfectly fine! 
    What I would suggest is to try the following:
    Firstly remove the wireless connection from your phone and reset the router then try reconnecting. Also please clear all the cache from the web browser. 
    If this doesn't reset the phone by doing a soft reset by typing *#7780# (Please remember to back up your phone) and then try reconnecting. 
    If this doesn't work then please try a hard reset by typing *#7370# (Again please make sure you have backed up your phone!!).
    Just to mention if your phone asks for a security code then the default code 12345.
    Let me know if any of the above helps if not then please let me know and I shall endeavourer to think of some more potential troubleshooting we could try.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia N97 WLAN problem

    Hi,
    Came to add my 2nd Wireless LAN connection into the destinations system. Already added one Wireless LAN (which is now priority 1 in the Internet destination). when I added a 2nd wireless LAN connection it added it to a new 'Uncategorized' destination which it created automatically.
    Fine I thought, so I selected this destination, and then selected the access point, and used the 'move' command to move it over to the Internet destination. It then told me that it was going to delete the 'uncategorized' destination as it was no longer in use.
    Strangely the new access point did not appear in the Internet destination. So I tried to re-add the WLAN, and now everytime I do so the 'settings' application crashes
    Anyone managed to add 2 WLAN entries to the same destination yet or had this problem and knows how to work around it?
    Thanks.
    Solved!
    Go to Solution.

    I solved this problem by the way (there is a bug in the firmware). The wireless point did not intially have internet access, hence why it was put into a new uncategorized destination. The bug exists if you switch an access point (which it things doesn't have internet access) into the Internet destination.
    Only thing you can do to fix your phone then is the full reset using the # code. 

  • WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

    Hi all,
    I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
    Apple Software Engineers - please help and release the next update to fix it
    Best regards
    O.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Habe seit IOS 6 wlan Probleme, die auch nach dem IOS 6.0.1 update nicht behoben sind.

    Habe seit IOS6 wlan Probleme, die auch nach dem IOS6.0.1 update nicht behoben sind. Genau wie vorher, voller Empfang aber keine Verbindung. Gibt es noch neue Tipps wie man das beseitigen kann oder muss man auf ein weiters update warten?

    Hallo,
    bei mir kommt immer die Meldung "Verbindung zu ...(mein WLAN) fehlgeschlagen".
    Nachdem alle Empfehlungen wie Neustart, WLAN aus und einschalten etc. nicht geholfen haben, habe
    ich auf Empfehlung von telefonischem Apple Support  mein iPhone 4S auf Werkseinstellungen zurückgesetzt und als neues iPhone konfiguriert. Leider ebenfalls ohne Erfolg! Meine sonstigen Geräte (iPhone 3GS, iPad2, ein weiteres iPhone 4S, die alle noch unter IOS5 laufen, funktionieren einwandfrei!)
    Wer weiß, wie man wieder auf das gute alte IOS5 zurückkommt, zumindest bis Apple das Problem gelöst hat?

  • Logic remote wlan problems

    Hey, guys,
    I'm experiencing connectivity problems when trying to connect Logic Remote with an iMac running Logic Pro X. Both in the same network of course, all other apps requiring to connect the iPad with any Mac in the network work very well, internet is fine etc. Seems Logic remote connects for a second, than it disconnects again, saying WLAN is weak or unreliable (which isn't the case), sometimes no connection at all. All operating systems up to date.

    I also had this WLAN Problems and solved it:
    1.) Try to remove all controllers you added earlier (also Logic Remote) under setup..
      2.) Restart Logic an Logic Remote -> This should re-add Logic Remote to your Controllers.

  • ANOTHER NOKIA C3 WLAN PROBLEM

    Ok, I'm not able to choose wlan or gprs internet but untill I was trying to open the Internet via WLAN tel says 'service not available''.'' activating default in all applications'' does not work, simply because it's getting back all my options from WEB and I''m connecting the Int via gprs again. What should I do? any ideas? maybe it's all about my router or so? THANKS IN ADVANCE!

    Hi, this is Paulo Bral™,
    I recently got an Nokia C3-00 mobile, and I faced so many problems with Wi-FI connection of this phone that I decided to share my experience with you guys.
    I am going to write here the definitive guide to fix all WLAN problems you may encounter (and this is something that not even Nokia Support was able to do) - are you ready?
    First of all, I am assuming you have the knowledge about Wi-Fi networking (SSIDs, Channels, Security, and all the terms related to setting up a decent Wi-Fi connection), second, you need to have full acess to your router, as we will configure everything from the ground, third and last you will need a tool called InSSIDer from Meta Geeks (Google it) to perform diagnostic tasks explained below.
    Analyzing the networks around you
    First off, you need to spend some time running the tool InSSIDer on your PC to collect data from Wi-Fi networks around you as they may be the cause of your connection problems. We will use these 2 visualizations: "Time Graph" and "2.4GHz Channel" to monitor the networks around - if you dont know what you are doing, better close this page and start running away.
    Configuring the router
    After collecting data from the networks around, now it's time to set up our router. I found out that I have other 15 networks around me, and I found out here that most of them were using Channel 6, the same I was using. Also some of them are using the Channel 9 and 11. In this case, I set my router to use the Channel 1, as nobody were using it and it is also far away from other Channels being used. After some time collecting data, you will be able to see which Channel has no user or less users, and you must choose it. The security of you WLAN is your choice, as it does not have any side effects. I suggest using WPA2 as it is the most secure of the 3 this mobile supports. BTW, don't ask me how to configure your router, ask Google for it!
    Testing WLAN connectivity
    Now it's time to test WLAN connectivity with your reconfigured router. Try opening some pages, try watching YouTube videos... If your mobile is working OK, with no connection errors or timeouts, your problem was only the interference caused by networks around. But, if you still experience problems like timeouts or errors opening pages and YouTube videos, you need to continue to the next step.
    Using router QoS and Static IP
    If you have an very fast internet (10MBPS+) you will need to slow things down, as this cell phone does not really support fastest internet speeds, now you have to know your cell MAC address, make it use an Static IP, and configure QoS to reduce the downstream speed on the cell phone IP to 3MBPS max speed - BTW, not all routers supports this, if yours don't support it, get another router, I recommend Cisco or LinkSyS.
    Still having problems
    The above steps solved my problem for a while, as the phone were working a little better with my Wi-Fi, yet I experienced some timeouts and errors opening pages. Now the next step will require a PC connected to your network and this will reduce to ZERO the timeouts and errors opening pages.
    Keeping the Connection Alive - for bad routers
    If you have a generic (not Cisco or LinkSyS) cheap bad router, you will need this step! I noticed that even when the cell phone were showing the Wireless icon, the LED indicating Wireless on my router was not always turned on, so I understood my router was like "ignoring" the cell phone connection and just stopped responding to its calls. To fix this bad router behaviour, you will need a PC connected to your network, and prepare yourself to laugh: All you need to do is "keep pinging" the cell phone IP as this will keep it connection alive. The simplest way is to create a .BAT file with these 3 lines inside:
    :autoping
    ping <cell phone IP>
    goto autoping
    Now save it on your desktop, use anyname.bat as you wish - now run it and connect your cell phone to the WLAN. You will notice the difference, as it will work so stable like if it were connected using LAN cable!!! You will never have connection problems again!
    Well, that is it, following this guide your cell phone will never have WLAN problems again (well, at least on your WLAN).
    Best regards,
    Paulo Bral™
    Am I butterfly dreaming I'm a man? Or a bowling ball dreaming I'm a plate of sashimi? Never assume what you see and feel is real!

  • N97 GPS Problems - Hardware or Software?

    Sorry to start yet another thread on the N97 GPS problems, but reading through all the threads there seems not to be any clear conclusion as to whether or not the issue is a software/firmware one, in which case potentially fixable, or a hardware one, in which case the phones have to be sent back and replaced.
    My personally feeling is that it's hardware.  Some people have no issue but many have a problem.   I have the same issues with losing the satellites, poor GPS accuracy, etc. both with Ovi Maps 3.01 and with Google Maps, which again to me points to a hardware fault.  Updating firmware from v10 to v11 made no difference to GPS performance.
    So, I wonder if people agree with me that it is a hardware issue and the phones have to go back, or if there is some hope of it being a software issue and thus being fixed?
    Anyone had any success in sending back an N97 for replacement because if the GPS issue? Mine is a UK 3 branded N97 black, free as part of a contract, and I have a feeling that 3 are likely to resist replacing the phone if they can.
    Mark

      I believe that the GPS problem in N97 not a hardware problem but a software problem with the Nokia (Ovi) Maps 3.
    Below explanation why:
    I have been using Nokia Maps 2.0 on my previous phone – E71 for more than one year. It worked pretty well and stable. One important remark – it is important to configure the server for AGPS under Settings well...
    About one and half month ago I decided to install on my E71 the newest Nokia (Ovi) Maps 3.0. And ... immediately my problems started. The GPS performance worsened – I was continuously getting messages about GPS lost, recalculating and usually concluding that I am on a parallel road to the road which I was actually driving – horrible...
    Also my colleague with N82 made the same mistake (installed Maps 3.0) and got the same problems.
    Because of this problems I have removed this new version on my E71 and went back to Nokia Maps 2.0. And guess what? - The problems were gone!
    Two weeks ago I bought my N97. It comes only with Maps 3.1 so I was expecting problems. And ... indeed I have them all. Bad thing is however that I cannot go back to Maps 2.0 on N97...
    I tested GPS accuracy with three different phones (N97, E71, E75) and two versions of Nokia Maps. What I can see is that its normal to be about 80-100 meters on average. This is not a specific N97 issue! And apparently should not be a problem because Nokia Maps 2.0 works great even if this application shows accuracy of 100 m. Probably thanks to the Assisted GPS.
    So my conclusion is that it is not a hardware problem but a problem with (a part of) the software of the Nokia (Ovi) Maps 3.x ! Maybe with a GPS Driver? Or the functionality of the assisted GPS?
    Message Edited by concordia on 16-Aug-2009 04:04 PM

  • Re: GT70 2PC - WLAN problem

    Re: GT70 2PC (Dragon Edition) - WLAN problem
    I am experiencing a problem with LAN rather than WLAN, it as not worked since I bought the Notebook in September. Microsoft support spent over 6 hours trying to assist. The driver is downloaded but not picki...

    Good call.  More problems kept popping up with even more usb ports.  I RMA&#39;d it with newegg and just got the new board and installed it.  Working great so far.
    So anyone who finds this post, if you are seeing these type of issues, definitely don&#39;t w...

  • N97 mini wlan problem

    i bought a brand new n97 mini 2 weeks ago.Everything is fine but the only problem is that i cannot access internet through  wifi,When i try to connect i am getting an error message "invalid server name".plzz help 

    How do you connect to wifi ? Try Menu-settings-connectivity-wlan, pick your home network and select start web browsing. Also try going to web browser on phone and select options- clear all privacy data !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • N97 connectivity problems. N97 connects with WLAN ...

    Hi,
    A few days ago I installed the new firmware version 21 on my N97. Now when I turn on my phone it wants to connect to a wlan so that the phone can use that connection for your widgets that require internet. Before update 21 it always would connect with my mobile internet which is want I want it to do. This is not a problem for some apps since I can change the settings for those apps and have them connect to the mobile internet. But for some apps like the Ovi store or downloads of updates for my phone keeps asking for a wlan connection which in fact is turned off in my settings so why is it even asking for wlan?! The problem for those apps is that I can't change the settings so that they also connect with my mobile internet just like before with firmware version 20. I hope that you can solve this issue?

    >but what happens if the biosupdate fails and the Lappy dont work anymore, is this ok with the garantee ?
    Before you start BIOS update please check Toshiba BIOS-Update Information .
    Bye and good luck!

  • N97 vpn problem

    Hi all,
    i try to get (since 2 weeks) working VPN connection between n97 (vodafone-version/product key 0587004/ firmware 21.0.045) and VPN-gateway of my company.
    I've installed an actual version of Nokia's VPN-Client(4_0_101117.sisx) and used Nokia Configuration Tool(6.1_06_01_2011) to create/transfer a VPN-policy to the device. It works but
    I get always that error in VPN-Protokoll (with WLAN or Mobile):
    failed to activate VPN access point "xyz" reason code -2.
    my IT-department can't help in this case.
    We get no IP-packets from the N97 on VPN gateway - it looks like internal problem of the N97-firmware or VPN-client-version or ...?
    I googled and googled and tried any reasonable solution but get the same error.
    I could buy SymVPN - 30 € is not a problem but our VPN-network expects IPSEC not PPTP...
    Can somebody help ?
    Best regards
    Solved!
    Go to Solution.

    i got it
    don't use Nokia Configuration Tool - the version produces wrong policy-format (or not compatible policy-parameters ?). i've used a working example and just customised it : http://www.family-martens.de/index.php?option=com_content&view=article&id=74:nokia-n97-vpn-verbindun...
    Best regards.

  • N97 WLan settings and wizard GONE!!

    My wlan settings and wlan wizard has disappeared from my phone. Even after re-installing software and putting it back to factory settings, I can no longer use the wlan on my phone ... Not happy, pls help

    Yes - this happened to me too. The only way I could resolve it was by doing a HARD reset (power off the phone and then press the
    Caps shift
    Space bar
    Delete button
    On button
    simultaneously).
    This corrected the WLan and opther problems - but if you try this ensure that you have backed up all your stuff (contacts/data etc.) first, just in case. It will not affect stuff on a memory card, but will probably affect items on the phone and mass memory.
    After the reset the firmware showed the latest version12.0.026.209.06 on my unbranded N97. What's more I seemed to have doubled the amount of free RAM, even after loading all my programs and data etc.
    It's a pain that this had to be done, though. Is it a case of the update not being thoroughly tested for UK versions? We've had to wait long enough for this firmware update!

  • [N97] Internet Problems

    Hi,
    a week ago my N97's internet was perfect but since yesterday something has happened which is not allowing me to connect to the internet
    when i start internet it says:
    select connection:
    (no data)
    and from settings->connectivity->wlan i try to connect to my internet nothing happens
    can some1 help me plz thx

    Have you set the phone to offline/flight mode ? in destinations, when your access point is highlighted and you select options you should have the option to delete it, if you do as I suggested when you re-define an access point (by opening the browser or a web based app) it should work fine. If you are still having problems a reset will solve it, but it seems a lot of work if you can resolve it by resetting the internet access points !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • GT70 2PC - WLAN problem

    Good day,
    I recently bought a GT70 2PC with the following specs:
    processor: i7 4810MQ 2.8 GHz
    RAM: 8GB
    graphics: Nvidia GTX870M
    Ethernet: Killer e2200 Gigabit ethernet controller
    WLAN: Killer Wireless-N 1202 Network adapter
    The problem:
    I connect to the internet via wireless. When I play specific games I experience lag spikes (latency not FPS). Specifically League of Legends. I experience 30 ping constant, and then every 1-2 minutes it jumps to 500+ for 2-3 seconds and then goes back down. It is extremely frustrating. I tried playing Diablo 3 and didnt experience this, so I think it might possibly be specific to League of Legends. Just to note again, I have 100+ FPS constant, its not a graphics problem.
    The troubleshooting ive already done:
    This is not an issue with my fiber optic internet connection. I connect the laptop via ethernet cable and then the problem doesnt occur. I also used to play on my old laptop on the same internet connection without the lag spikes via wifi. I game far from my router so getting a cable is not a good solution, I paid an arm and a leg for this laptop I should be able to play on wifi if I want to. This also cancels out that it may be any other software causing the issue, its a fresh install in any case.
    There is a sticky post called How to fix issues with Killer Lan/WLan. I followed the steps and currently do not have the Killer software installed, I only have the drivers installed. However, this did not help at all. I did this procedure 3 times out of desperation. Did not work for me.
    I contacted MSI support. They told me to update my graphics drivers after I made it clear this is a latency issue. (I updated the graphics drivers the day I got the laptop in any case.). I responded to there feedback but they are taking long to get back to me, I am really hoping someone on this forum might be able to help.
    I checked resource monitor and also used software called Process Monitor to log all CPU and network usage while I was playing. The lag spikes were not visible in this data to my knowledge.
    I tried toggling bandwidth control on and off when I still used to have the Killer software installed.
    My thoughts:
    The fact that there is a post about people having issues with the Killer WLan makes me think that the wireless network adapter (or its drivers) are definitely the problem. However, after trying the fix in the sticky post and it not working makes it feels quite hopeless at this point. I do have the latest drivers installed. I feel like my only option is to wait for new drivers to be released and just hope that its fixed in the new drivers, but who knows how long that will take. Im thinking of sending the laptop back to where I bought it from but if this is a known issue affecting all laptops, id probably have the same problem with a replacement. Any advice on this would be greatly appreciated.
    Thanks in advance!

    Hi Svet,
    Thanks for the link but unfortunately it did not solve the problem. According to device manager the driver version has gone up to 10.0.0.287, but the lag spikes are still exactly the same.
    Further, I installed a game called Day of Defeat, to test if this is a problem specific to League of legends or if its a general problem. I have the lag spikes in Day of Defeat as well so its not game specific.
    Do you think it could be the Killer Network software causing this? Again I tried with bandwidth control on and off. Is there any way I could get these drivers without the Killer software or do you have any other possible solutions I can try?
     

Maybe you are looking for

  • Can't open the Zipped file

    Hi I am making a zip file using GZIPOutputStream. But I am not able to open the zip file that is created using win zip.The size of the zipped file is 81 KB and the input file is 3,245 KB.I have closed all the streams still I am not able to figure out

  • Adding 2 more monitors to HP p7 1435 pc

    I want to run a third monitor on my HP Pavillion p7 1435 desktop computer. When I hook the third one up using a USB Video adapter...it shows that its there but unable to get it to function at all

  • What is certified operating temp. for WS-X6708-10GE

    I couldn't fins any docs which describes the certified operating temp. for this module, and with "show env" the temp seems to be quite high. module 1: module 1 power-output-fail: OK module 1 outlet temperature: 45C module 1 inlet temperature: 31C mod

  • Ipad 64 gb wifi-4g speaker is giving blown up sound if I play any song in full volume

    I pad Ipad 64 gb wifi-4g speaker is giving blown up sound if I play any song in full volume it gives hoarse sound!pls help

  • Workflow process route

    Hello, Is there any way to retrieve process route for a specific item key by SQL or PL/SQL instead of application web page? The table WF_ITEM_ACTIVITY_STATUSES doesn't contains enough information about how the process goes through. many thanks.