Name of domain that produced error
Hi,
How can I find out the name of the domain that produced the error?
Thanks,
Malini.
Hi,
When the ABAP short dump is displayed, choose "Debugger" and then, using the call stack display, select the program ZGUIXT16. Now you can display the value of the field "DOM". This is the name of the domain that produced the error.
If you have no possibility to invoke the debugger, only the ABAP short dump, then please look at the value of table DD04L. It contains the data element at the time of the breakdown.
For example, the entry could look as follows:
DD04L |RESADSGDEMAND A0000RESA
The data element in this case is RESADSGDEMAND. Using the repository information system, you can now find the domain name, which in this case is also RESADSGDEMAND.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.
Similar Messages
-
Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHuiHi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS -
Fix for iTunes Producer error message? Fixing unallowable image names in iBA Gallery
In Gallery I had image names with unallowable characters, e.g. "photo name.jpg". I changed the name to "photoname.jpg" and re-added it in Inspector>Interaction>Gallery Media. It still appears as "photo name.jpg"??? Even in a new Gallery Widget?
I'm new here so please forgive me if I am violating any protocol. I would greatly appreciate any guidence in correcting my error.
Thanks!!!
Gene Yore
aka eeyoreThank you vinnyvg!
While trying to respond to this iTunes Producer error message,
"ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This<mailto:Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This> file does not start with a start of image marker.]" at Book (MZItmspBookPackage)
The delivery of your book ended in error because there are image files that do not match the file extension type. Make sure that all image files inside the book file end with one of the following: .jpg or .png and that the image file itself matches the file extension type."
I did have a few tif images which I converted to jpg.
But, I ran across this posting which suggested I had other problems with my naming convention.
https://discussions.apple.com/thread/4788489?start=0&tstart=0
which says
GeePeeGee
This solved my questionRe: Uploading error codes - does anyone speak their tongue?
Feb 15, 2013 9:33 PM (in response to GeePeeGee)
So, it turns out, the problem with these png-images is the NAME. There are no restrictions, to name your pictures, but when you intend to use them in iBooksAuthor, make sure, that there are no "wrong charakters" in the name. You may use a to z charakters, 1 to 0 numbers and "-" and "_". That's it.
The file "St. Giles.jpg" has
a) a ".", which is wrong and
b) an empty space, which is wrong too.
When you use screenshots, things are getting even worse "Bildschirmfoto 2013-02-08 um 08.02. 15.50.19".
So, if there are error codes as specified, you have to go through the document, click on each and every image and then check the filename. As you see below, you must activate the image itself to see the filename (in this case the filename is corrcect)."
eeyor -
Hello Guys,
exchange 2007 SP3
windows 2008 r2
we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
we checked mailbox feature in EMC and owa is enable
checked adsiedit - looks good
we checked allow inheritance - checked
we reset the password and try to login to owa from exchange server , no luck
user can login to her computer and outlook without any issue
we also moved her mailbox to another server
user facing the same issue from office and VPN
any suggestion ?
Thanks
Sandip
sandipHello Lynn
thanks for the reply. but I already checked that and allow inheritance already checked .
when user unable to access webmail with error "The user name or password that you entered is not valid"
will it generate any event id on exchange server or domain controller ?
in our case we have mailbox and CAS on different servers
any suggestion .
Regards
Sandip
sandip -
Table Containing Details of Program Names that have errors
hi,
As we can get the Dump analysis in ST22, i want to get the names of the programs that are shown up here. i.e, which table holds the data that contains the names of the programs that have errors or exceptions.Hi Harsha,
just check the tables DD02L and DD03L
HOPE IT WILL HELP YOU
Regards
Rahul sharma -
I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.
-
Today we had this error code on starting Office programs out of the blue. We've had this error in the past and we know what caused it, but that action wasn't taken. I've already read other posts, but no "Answer" provides a real solution to a clear
problem with Office 365.
The error: "We're sorry, but (program name) has run into an error that is preventing it from working correctly. (Program name) will need to be closed as a result."
It offers "Repair Now", then the two following options: "Online" or "Offline". Neither are effective.
In the past we used the Office 365 Fix It tool, but uninstalling and reinstalling Office on a regular basis is unacceptable. Resorting to web apps is also not going to happen.
Running Win 7 Pro 64 bit, fully updated.
We're starting to get fed up with this broken software. Paying monthly for programs that don't work is ridiculous. Any real answers would be greatly appreciated!Locate your Office application and check the setting of Compatibility.
For example,
Right click on Excel (.exe) > Properties > Compatibility > uncheck all the boxes, click Ok and check if it helps.
To access Excel (.exe), open the following location:
C:\Program Files\Microsoft Office\Office15\Excel.exe
Or
C:\Program Files\Microsoft Office 15\Root\Office15\Excel.exe
Try to open Excel and check if it opens.
http://social.technet.microsoft.com/Forums/en-US/590617de-629f-413b-8c11-f3cc79e27e7a/excel-2013-error-on-open-were-sorry-but-excel-has-run-into-an-error-that-is-preventing-it-from?forum=officeitpro
Thanks.
Tony Chen
TechNet Community Support -
Copying to TC drive results in "network name is no longer available" error
Hi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
RamonHi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
Ramon -
Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.
Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams -
XMII java side produces error.
We installed xMII.
When we call the address blowe it produces error.How can we solve this problem?
Thanks.
Adress : http://server:50000/XMII/Menu.jsp
Error :
503 Service Unavailable
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/xappsxmiiear cannot be started. Reason: it has hard reference to resource com.sap.mw.idoc with type library, which is not active on the server.Hi,
Try giving Server IP address, like "http://IP addredd:50000/XMII/Menu.jsp" .
If you are using any VPN connection that Server Name and IP should be mapped in Hosts file under
"windows/system32/drivers/etc/hosts"
I dont know whether this helps but you can just give a try.
Thanks,
Rao. -
Facebook keeps giving me a cross domain reciver page error on most issues, why is this?
cross domain page receiver error message on facebook?
== URL of affected sites ==
http://http://facebook.mafiawars.com/mwfb/xd_receiver.htmThanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!
-
SSRS 2008 R2 calls Oracle stor proc produces error invalid number or type of parameters
Hi,
Our Microsoft SQL Server Reporting Services (SSRS) version 2008 R2 reports have been working for years. They retrieve data from stored procedures on an Oracle 11 DB using the Oracle 11 Client. After the Oracle Client on the SSRS server was upgraded from version 11 to 12, none of the reports work anymore.
Trying to open any report in IE displays the following error:
Query execution failed for dataset 'ds_MyDataset'. ---> System.Data.OracleClient.OracleException:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'usp_MyOracleStoredProc'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
The simplest example we're using to troubleshoot the problem is a report that has no parameters, which calls an Oracle stored procedure which has no input parameters, and only 1 output parameter (of type "Ref Cursor", the one Oracle needs in order to return the resultset). Even this simple report produces the error shown above.
I placed a "debugging aid" inside the body of the stored procedure, a SQL insert statement to log to a table, so I can see if the body of the procedure's being executed at all. It never runs. That leads me to think that the error occurs before executing the procedure, when SSRS is probably using something like DeriveParameters() to detect the number and type of parameters the procedure has.
This leads me to think that when SSRS detects which parameters the Oracle procedure has, the Oracle Client returns 1 parameter (the output cursor). SSRS looks at the number of parameters defined in the report's dataset, and it finds zero b/c the output cursor parameter Oracle uses to return the data doesn't need or can't be defined in SSRS. Then SSRS compares 1 <> 0, and displays the error.
So, in order to test, I removed the output parameter (the one of type "Ref Cursor") from the Oracle stored procedure, and then the report runs, and the body of the procedure gets executed. There are no errors, but no data b/c the output cursor parameter has being removed from the Oracle procedure.
This leads me to think that in this case, when SSRS detects which parameters the Oracle procedure has, the Oracle Client returns zero parameters. SSRS looks at the number of parameters defined in the report's dataset, and it matches b/c there aren't any, so SSRS proceeds to execute the procedure.
Could there be a "miscommunication" between SSRS 2208 R2 and Oracle Client 12 in reference to the number of parameters, b/c with Client 11 all reports work, but with 12 none works?
Any help with this matter will be greatly appreciated.
Sincerely,
RichardOur Microsoft SQL Server Reporting Services (SSRS) version 2008 R2 reports have been working for years. They retrieve data from stored procedures on an Oracle 11 DB using the Oracle 11 Client. After the Oracle Client on the SSRS server was upgraded from version 11 to 12, none of the reports work anymore.
Havent' run across that one before but it sounds like more of a problem with SSRS than anything to do with Oracle.
But what you posted above raises the obvious question: WHY?
Why did you upgrad the Oracle client to 12c to begin with if you are still using an Oracle 11g database? Major upgrades like that are normally done for very specific reasons so what were they?
I suggest you test by reinstalling the 11g client and get your reports working again.
Also - did you install the new version of ODAC to support the new Oracle client? There could be a compatibility issue if you are using a new Oracle client but the older ODAC version.
ODAC 12c Release 2 installation instructions
You also need to make sure the bit versions (32 vs 64 bit) match. -
The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:808 0.0.0.0:0 LISTENING 2260
TCP 172.17.2.123:444 172.16.2.127:8050 ESTABLISHED 4
TCP 172.17.2.123:444 172.16.2.127:8069 ESTABLISHED 4
TCP 172.17.2.123:444 172.17.2.127:8053 ESTABLISHED 4
TCP 172.17.2.123:10952 172.16.2.68:80 ESTABLISHED 3296
TCP 172.17.2.123:11185 172.16.2.90:8080 SYN_SENT 468
TCP 172.17.2.123:11190 172.16.2.90:8080 SYN_SENT 15268
TCP 172.17.2.123:11330 172.16.2.90:8080 SYN_SENT 1296
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:808 [::]:0 LISTENING
2260
TCP [::1]:6001 [::1]:8028 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8029 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8030 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8031 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8032 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8033 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8034 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8035 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8036 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8037 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8040 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8041 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8048 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8049 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8059 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8060 ESTABLISHED 4764
TCP [::1]:8028 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8029 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8030 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8031 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8032 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8033 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8034 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8035 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8036 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8037 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8040 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8041 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8048 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8049 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8059 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8060 [::1]:6001 ESTABLISHED 9980
TCP [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED 2260
TCP [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED 4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager -
When I am trying to assign a job to my name, i am getting an error.
Hi,
In R12, when I am trying to assign a job to my name, i am getting an error(APP-PER-07510: You cannot continue, Future changes exist).
my user was end dated. i deleted that end date and trying to working on that, i can create a new user and will work on that user also but that problem is, we have my company unique id , based on that only user should be created.so, what ever i have user id, it had been created and i dont have any scope to create new user.
simply to say i have to user my end dated user only, how can i use it in feature also.
Please help me to come out form this situation.
Thanks,
Ram.Are you using "Shared" HR? You can refer to note >1074384.6 on Metalink for a resolution to this issue. If you are using the full install of HR then refer to note > 786785.1 on Metalink
Edited by: pillair on Jun 12, 2012 9:03 PM -
FOR/NEXT loop produces Error in ProcessSQL: Subscript out of range
Hi all,
The 2nd FOR/NEXT loop in the following code produces Subscript ouf of Range error:
*LOOKUP RATEAPP
*DIM MODEL:RATEENTITYDIM= DRIVEDIM.DRIVER_ENTITY
*DIM MODEL:RATEACCOUNTDIM= DRIVEDIM.DRIVER
*DIM MODEL:INPUTCURRENCYDIM = "EUR"
*ENDLOOKUP
// Select lookup and normal members by group
*SELECT(%DRIVERSA%, ID, DRIVEDIM, "[GROUP] = 'A' AND [DRIVER] <> ''")
*SELECT(%MANUALSA%,ID,DRIVEDIM, "[GROUP] = 'A' AND [SOURCE] = 'MAN'")
*XDIM_MEMBERSET DRIVEDIM= %MANUALSA%, "U_TEMP"
*WHEN ACCOUNTDIM.ACCTYPE
*IS *
*REC(EXPRESSION=1, NOADD, DRIVEDIM="U_TEMP")
*ENDWHEN
*GO
// this is ok
*FOR %MANSET% = %MANUALSA%
*WHEN DRIVEDIM
*IS %MANSET%
*WHEN %VALUE%
*IS <> 0
*REC(FACTOR=GET(DRIVEDIM="AD.TEMP"),DRIVEDIM="AD.TEMP")
*ENDWHEN
*ENDWHEN
*GO
*NEXT
*XDIM_MEMBERSET DRIVEDIM= %DRIVERSA%, "U_TEMP"
// this is not OK
*FOR %DRIVSET% = %DRIVERSA%
*WHEN DRIVEDIM
*IS %DRIVSET%
*WHEN %VALUE%
*IS <> 0
*REC(FACTOR= GET(DRIVEDIM="U_TEMP") * LOOKUP(MODEL),DRIVEDIM="U_TEMP") // * LOOKUP(MODEL)
*ENDWHEN
*ENDWHEN
*GO
*NEXT
If I remove the FOR/NEXT loop, this runs fine. The error occurs everywhere - in logic debugger, in DB, in ExecuteBaseLogic if included in Default logic. The REC statement inside the loop can be anything, even as simple REC(FACTOR=1,DRIVEDIM="U_TEMP"), so the problem is in the loop, not anything else. It validates nicely and the compiled logic looks just as expected.
This error could occur sometimes if the membersets are too large. However, in this example, the number of members is rather limited. In the debugger is is possible to limit the data region to single specific intersection and the DRIVEDIM membersets combined is exacly 15.
Could it be possible that the error is caused by member ID-s like AD.1.AVGWAGEGROWTH (length=18)? Is there anything else that can cause trouble?
Any ideas appreciated.
Thanks
Madis
Edited by: Madis Udam on Mar 24, 2011 11:06 AMI don't think you should have"." dot's in you ID's.
think about it, in your code you have ACCOUNTDIM.ACCTYPE, which represents the account type of the dimension.
If you have an id "AD.1.AVGWAGEGROWTH"; wouldn't it think that you are trying the get a value of some member?
That's just a guess, we established that we wouldn't use any special characters on our id's
It's working so far
Try changing the line
*IS %DRIVSET%
to
*IS "%DRIVSET%"
Edited by: Leandro Cardoso Feliciano on Mar 28, 2011 10:45 PM
Maybe you are looking for
-
Hi, Please provide me Link or Doc's for "Goods Movement without Purchase order number/ with reference ?" Thanx
-
SQL query and Delete the data based on condition
Hi All, I have one requirement like I need to fetch the data from the table, In that table one filed (XXXXX) domain type is STAMP. delete the data if the sy-datum ( length 8) is greater than field XXXXX which has length 14. Please suggest me how to
-
Recommendations for installation on a 256mb laptop (Acer Travemate)
I've finally managed to convince my wife that it would be a good idea to install Linux on her laptop, an Acer Travelmate 244LC with 256mb RAM and a Celeron 2.6 GHz processor, which was running unbearably slowly. I recently reinstalled windows on it,
-
Sender in Purchase Order via Email
Hi folks, I made the necessary configuration so that the Purchase Orders are sent automatically via Email to the Vendor. The problem is: if the Purchase Order has a Release Strategy, the vendor receives the Email from the person who finally released
-
Sale order plant change not possible
dear sir, we have set valuation level is a plant in OX14. we have two production plants 1010 and 1020 we are using variant configuraion also. we are unable to change the plant from one plant (1010) to (1020) other in sale order VA02 if we have 1) Pr