Sale order plant change not possible

dear sir,
we have set valuation level is a plant in OX14. we have two production plants 1010 and 1020
we are using variant configuraion also.
we are unable to change the plant from one plant (1010) to (1020) other in sale order VA02 if we have
1) ProForma-Order
2) Order BOM
3) Cost run
Retaining above things how can we change the plant in sale order
please give some details to solve this problem
thanks and regards,
srinivas

Hi
Guess the changes are not saved. Could you see the changes recorded in the sales order - change log (Menu-Environment-Changes).
Please check again which plant is there in that particular sales order item.
Thanks,
Ravi

Similar Messages

In Sales order plant is not allowing to change

Hi Guru's
In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
dnr

Hi friend,
I suppose you cannot change the plant at order level if the material is created to a particular plant.
As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
Regards

Sales order creation is not possible for this notification type

Hello,
I want to create Sales Order through following menu:
Notification -- Functions - Sales order - CreateSelection of Order Type.
But I get following message:
'Sales order creation is not possible for this notification type'
The message says: No sales order type is assigned to the notification type.
But I did not find any such configuration where I can assign notification type to Sales Order document type.
Please help.
regards

Transaction OIM9
Menu Path
Customizing > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Define Order Types and Special Notification Parameters
Nomally CS (customer service) area use this function.
Regards
Luke

Sales order costing is not possible for recursive configurable material

User is creating cost estimate for sales order, where system is throwing above error.
The diagnosis is like below
The system recognized that the BOM structure being costed is a recursive production process in which configurable materials are used. This scenario is not supportive by sales order costing
System resopose
Material XXXX in plant XXXX can not be exploded further.
If anyone has come across such error or knows the solution, please help.
Thanks

Answered

Sales order costing release not possible due to Goods in transti account

Hi,
Business introduced Goods - in - Transit (Balance sheet account), so PGI will always post to GIT and Invoice it will get reversed.
For one of the Configuratble material (MTO) scenario we need the Sales order cost estimate to get the Planned cost.
When i try to execute the sales order cost estimate it says cost element doesnot exist for GIT GL (WHich is right).
But with maintaining the GIT how to achieve the sales order cost estimate.
Can you please help me in this regards.
Thanks,
Sudha

Hi Ajay,
I have created GIT (B/S) account with CE category 90.
but in sales order cost estimate getting message " inconsistancy in CE category" CE category 90 is not accetable it should be either 01/02
can you please help to move forward on sales order cost estimate with GIT account
Thanks,
sudha

Change the Sold to Party(SP) in sales order in change mode

Hi,
Is it possible to change the Sold to Party(SP) in sales order in change mode?
If yes then How??
Regards
Somnath

Hi somnath,
It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
Goto VA02-->enter the sale order number.
Press enter.
In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
You cannot change the sold-to-party at the partners tab that is present in the Header details.
It will be greyed out.
If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
You are also going to see this message while changing.
And finally save the document.
Regards,
Krishna.

Getting entry Order receipt/delivery not possible, credit customer blocked

Hi Experts,
I am getting an entry 'Order receipt/delivery not possible, credit customer blocked' in Return table when trying to change schedule line order qty for particular vbeln through BAPI : BAPI_SALESORDER_CHANGE . How can I change the qty field for particular sales order number. Also tell me the solution of this entry that I am getting in Return Table.
Plz help me.
Thanks and Regards,
Deepak

I'm guessing that this customer has a credit block. To verify this, go to transaction FD32 for the customer number (probably Sold-to party, but could be Payer or even Ship-to) and check 'Status' checkbox. On the status screen you'll see the checkbox Blocked. If it is checked, the customer is blocked for credit reasons and cannot receive any more goods. If it is just for testing purposes, you may remove the block.
Technically this is not even an ABAP question. If you won't find the customer block, as described above, I'd suggest to ask in the SD forum. You might want to mention the message class and number there.

Sales Order number is not showing in MD04

Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
Aman

Hi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

How to make Text Input in Sales Order Trigger Change Event

Hi Gurus,
I have a project going on where when a sales order is created, changed or cancelled, an IDoc is FTP to our freight company.
Now the issues is when we change a sales order text input (for example, shipping note). Nothing happens. The system doesn't take this as a change so no change event is triggered.
Text fields I'm talking about is the one from Go to --> Header. and for Item Go to --> Item.
When I input a note in this field, it comes out in the IDoc, but when I go back to the Sales Order and change the note, it doesn't trigger a change and therefore no IDoc is generated.
how can I go about this?
thanks.

Hi,
Could you initiate the idoc creation from a workflow?
Have you checked the event trace?
Is the BUS2032 object type CHANGED raised? I checked our system and event is raised on text change.
Transaction SWELS to activate and deactivate trace.
Transaction SWEL to monitor event raised.
Don't forget to turn trace off
Hope this helps
TB

Document being distributed no changes not possible and btadminh could not be locked

Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.

Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh

Add fields to Sales Order Mass Change selection screen

Hi,
Li & Fung customer customer needs to include following fields in the selection screen (Header Level) and the display output in Sales Order Mass Change (/AFS/MDC).
-     VBKD-BSTKD_E
-     VBKD-KDGRP
According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
-     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
Data selection part works perfectly, but if we do not enter any values in any custom field in the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
The system should display all custom fields values even if we did not input them as part of the selection screen
I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
thanks very Much.
Nilmini

Hi Nilmini,
In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
Regards,
Jelli

Display invoice print (PDF) in sales order(Credit/Debit note) attachement for Validator

Hello Expert,
I would like to know if is there any possibility to display invoice print (PDF) in sales order (Credit/Debit note) as attachment.
Issue: Customer raise the credit note with the reference of invoice, sometimes user don't explain the reason for credit and don't attach any reference document in sales order(credit request).
Customer requirement: Customer want to display reference invoice print (PDF)in sales order(Credit request) for validator so validator can cross check with invoice and validate the credit note.
Could you suggest the best solution?
I am thinking to give mandatory text box (Text determination)at sales order(Credit request)
Vipin

Hi,
You can enable Document Management System (DMS)
Please refer below links for details:
http://scn.sap.com/thread/459101
http://scn.sap.com/thread/2096563

New sales order and Change sales order in item level or delete at item leve

I got one requirement. Daily i have to display one report on new sales orders created on that day and any sales order item is modified or any item is deleted or any item is added.
                  How to get the sales order numbers and position numbers which will follow above creteria. I found one function module but it is not giving position numbers and new sales order details.
         Is there any BAPI for this requirement.

I am using "CHANGEDOCUMENT_READ" function module to get the new sales orders created and changed sales order items on a particular time. This function module is getting data from CDHDR and CDPOS tables. But only change sales orders is coming. New sales orders which is created on that time is not getting.
          One of my friend is telling like we have to activate one change pointer to retrive new sales orders also. Which is like there will be one check box.
Is any body having idea on this. Please reply me on briefly with the code to retrive new sales orders and changed sales orders

Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

Sale order plant change not possible

Similar Messages

Maybe you are looking for