NAS and storage/sharing content

When I buy a movie online, how do i make sure it stores to my NAS and not to the Appletv drive? Once a movie is part of my library, can i access the movie and add a copy to a laptop while keeping the original content on the NAS?

Minamu wrote:
When I buy a movie online, how do i make sure it stores to my NAS and not to the Appletv drive?
If you buy from itunes the movie will go straight to the NAS, assuming that's where itunes keeps your library. If you buy from the tv it will download to the tv and then automatically transfer to your NAS assuming that's where itunes keeps your library and your library is a primary (syncing library)
Once a movie is part of my library, can i access the movie and add a copy to a laptop while keeping the original content on the NAS?
Yes, just drag it from the NAS onto your laptop itunes application, you will need to authorise the laptop before it will play the content.

Similar Messages

HT1539 why does the download only show in shared content on my ipad? and can i access the shared content without wifi ( example driving in car?)

I am using the icloud from a pc, and sharing with my ipad ( 1st generation) new to this. I have downloaded some digital copies into my itunes account. On my Ipad one shows under movies and 2 show under shared. Y is this and can shared content be accessed without being contected to my home wifi?

I did a little bit more research, and if I go into iTunes and choose to display TV Shows and Movies as a List, I get a nice, sortable list of movies and shows to which I can add columns. A column that you can add is called "iCloud Status."
This column shows either Purchased or Ineligible for all of the titles. And this is where things get really confusing.
Sure enough, the items that are "missing" from the iPads, iPhone, Apple TV, etc. are the Ineligible items, but that's not the confusing part. What IS confusing is which items are Ineligible.
A good example is my Deadliest Catch collection -- I own the entire season 3 and 4 of DC; season 3 is Purchased and Season 4 is Ineligible. Back to the Big Bang Theory, I have five episodes from Season 4 -- 3 are Ineligible and 2 are Purchased.
It makes absolutely no sense that episodes from the same season of the same show would be a mix of Purchased and Ineligible!

HT5527 I have had my storage reduced once already. In the process they removed my "Save" mailbox and all its contents. I do notcare about contents so much as starting a new Save box. How? (OS X 10.7.5)

My iCloud storage is being reduced. I have already had it reduced once. In the process they removed my "Save" mailbox and all its contents. (One would think that that would be the last thing they removed. But they took that and the "Trash" mailbox, yet left several thousand old and read messages which were in my "Inbox".) I do not expect to get the "Save" contents back, but I would like to restore the "Save" mailbox, so that I can start from scratch saving msgs in it again. But I cannot figure out how to do that. When I go to "Mailbox" on the top line (between View and Message) and select New Mailbox I get a dialog box in which I can name a new mailbox. When I type Save, for the name of the new Mailbox I get a response; "The mailbox 'Save" already exists." But I cannot find it.
Thanks, Bill Burner

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Is there a way to have two iTunes music libraries: a library on my computer and a shared library on a NAS server (cloud box)?

I would like to know if I can have two iTunes music libraries: a library on my computer and a shared library on a NAS server (LaCie CloudBox). I want to have some music files on my computer and a larger collection of songs with cover art on a shared CloudBox (NAS server) so that also my family members can listen to the music on the Cloudbox. Is there a way to do this?
I know I could just copy the music files to the CloudBox, but that way only the songs are shared, not the cover art. I could also just keep the files on my computer and share the library via home sharing, but that way my computer would have to be always on. So is there a way to have a shared library on the cloudbox that works regardless of my computer being on or not?
Thanks,
Jay

Try homesharing. I am not sure if this will keep them seprate but this is really close to what you are looking for.http://www.apple.com/itunes/inside-itunes/2010/01/sharing-itunes-libraries-at-ho me.html

SCCM and use App-V Shared Content Mode.

Hello,
I am trying to use SCCM 2012 R2 with App-V 5.0 SP2 HF4 to use the Shared Content Store.
The App-V client is installed with the sharedcontentstoremode=1. When i deploy the app-v application with SCCM the content still hits the local disk of the client (streaming/Downloading). Is it just not possible to use the shared content store mode with
SCCM app-v application deployment or do i need to set some extra registry settings? I am unable to find any documentation that explains the way to configure SCCM/APP-v to use the Shared Content Store. The documenation i find is only related to the Full
App-v infrastructure.

It has the status "ready for offline use" so that is not oke. The SCS value is 1 so that is oke.
StreamMap.xml from a test application:
<?xml version="1.0" encoding="utf-8"?>
<StreamMap xmlns="http://schemas.microsoft.com/appv/2010/streammap">
<FeatureBlock Id="PrimaryFeatureBlock">
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.DE.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.ES.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.FR.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.IT.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.NLD.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.ntv.lng" />
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.RUS.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.SLV.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\ProgramFilesX86\Crypt-o\Lang\client.UKR.lng">
      <Blocks Index="0" Count="1" />
    </File>
    <File Name="Root\VFS\AppData\Microsoft\Crypto\RSA\S-1-5-21-470245501-2387565454-2059183142-10700\3bd9e42d4d55892a6db92fab2ceeda52_e9a29e28-f790-4efa-a70b-781bcd9f1df8" />
</FeatureBlock>
<FeatureBlock Id="PublishingFeatureBlock"><File Name="Root\VFS\ProgramFilesX86\Crypt-o\client.exe.0.ico" /></FeatureBlock></StreamMap>
What i expect here is that the lng files and icon file are placed on the disk, the .exe and DLL files etc are run from DP. Are you sure SCS will work with SCCM deployment? I am unable to find proper documentation explaining the combination SCCM-->APP-V
and SCS. All documents about the SCS are written about a FULL App-v Infrastructure.
Thank you.

Sharing content and permissions: bug?

I have 3 group of users in my Adobe Connect.
I give permission to alla of them to view the shared content.
Then i create some folders: folder1 only viewable by group 1, etc etc.
Inside folder1 i insert 2 contents: 1) a pdf file; 2) a record of a meeting.
I set permissions:
- the pdf file not viewable by anyone, except me;
- the record not viewable by anyone, except me.
If a user of group 1 goes inside the folder1, and he clicks on the pdf file, he sees that he hasn't the permissions.
I he clicks on the record, h ecan see (without problems) the record of the meeting!!!
Is it a bug?

As a work around, try the following:
add the following to the recording URL /output/insertnamehere.zip?download=zip
take the downloaded zip file and re-upload it to connect as a new content objectDesired Content Folder > New Content
Set and check the permissions.
This should validate as to whether this is a problem with the recording or just that instance of it. You can also set a custom URL for your recording by doing this. You may get a warning message on the summary page about the content not being complete or ready, but that is just Connect being angry about not knowing where the recording came from.

Network Attached Storage (NAS) and Aperture (Drobo, ReadyNAS, etc)

My photos are growing past a single hard drive worth of space - I'd like to attach a Droboshare to my iMac, and keep my photos on it.
I was wondering - will this still have usable speed, if I store my library locally (I believe this is called referenced photos - where the originals aren't in the library itself)?
Anyone else using such a setup? How is the speed?
Anyone have a Drobo or ReadyNAS, and have some feedback on how usable/fast it is with Aperture?

Note: See the other threads referring to storing the library on a NAS device -- basically it won't work (or, it's a minefield and it's unsupported).
So that leaves using referenced files on a NAS device. That will work. However, the Drobo is going to give you maybe 15 MB/sec over the NAS. The Infrant ReadyNAS is faster, but we're talking 20 MB/sec writes (best case) and 30 MB/sec reads (best case). Compared to an easy 50 MB/sec reads on an internal 3.5" drive on a desktop machine.
So will you notice the speed difference? Yes. If you use previews, it may not be intolerable, but it will be slower.
If you want to get a feel for yourself, I'd suggest baby steps. Maybe try referenced masters on one project to start, put them on the NAS, and go through your typical workflow. Only you can really determine what's slow for you. If they're small files, it may be okay. If they're 1Ds Mark III files, fuhgeddaboutit.

NAS and Verizon's MI424WR wireless router

I want to get a NAS drive for my home network but am very computer dumb. I have 1 wireless desktop, 2 laptops, 2 smartphones, and 1 android tablet that would be sharing the content of the NAS drive. What I want to know is can I just get a NAS and plug it into the LAN port on my router or do I need to get something else to share the contents of the NAS drive out wirelessly thoughout my home network?

That's exactly what an NAS is designed to do; just plug it into your network and you can share the storage. They usually come with some software that you run on one of your computers, or you can access an embedded Web page using any browser. This helps make it easy to configure so that the other computers can "discover" it for sharing. If your computers can "see" each other on the network -- whether they have a wired or wireless connection -- they'll be able to see the NAS device.
I'd encourage you to make sure that the NAS device supports DLNA. It's not a big deal, but this makes it simple to find music, photos, and other media files that are stored on it. It makes it easy to enjoy your favorite music on your various devices.
Also, if space permits, don't forget to use the NAS as backup storage for your computers and smartphones. People are storing more and more data on these devices -- some of it irreplaceable -- but don't back it up. Copying any critical files to the NAS device just takes a minute, and is valuable insurance against a disaster.
Alfred Poor

E3000 file and printer sharing issues

Yes, there is at least one other thread on this but it looked a bit stale.
Last Friday I replaced my BEFSR41 router and WRT54G wireless access point (which had gone brick on me) with an E3000.The E3000 is configured as a DHCP server at 192.168.168.65 with a scope of 66-115. The only other non-default setting is that I opened up the custom port for my slingbox.
Prior to making the switch, I had several network shares on an XP desktop that I used frequently from my Vista laptop. Now, however, I can no longer even "see" any other computer from any of the computers on the network, much less access their shared folders. In other words, if I view the network from any of these machines, the only machine that shows up is the machine itself. Everything else (internet access, slingbox, a print server) is working just fine.
One of the suggestions in the other thread was to turn off Norton Internet Security, which is of course not a viable option. However I did check the settings, relaxed the network default to "Shared", and raised the XP desktop to "Full Trust". This had no effect.
I pinged the various computers, and was able to do so by their IP addresses, but not by their computer names (that worked with the old router). On a hunch, I tried creating a mapped drive, and that also worked when I used the IP address, but not when I used the computer name.
So - there's nothing wrong with the network configuration, or with how the shares are set up, and Norton isn't the problem. The only problem seems to be that names aren't being resolved, which could be affecting windows discovery, too. Did the BEFSR41 provide some local DNS functionality by default, and the E3000 doesn't? Is there an option I need to enable? If so, I can't find it. Perhaps I should explicitly add the E3000's internal IP address as a third nameserver??
A note on the "support" I tried to get before I turned to the forums: The "Chat agent" asked a bunch of questions, misunderstood my configuration and my problem, and once he finally did understand said "we don't support file and printer sharing". It took me several more questions to learn that he really meant that the Chat facility isn't the place for these questions - I had to call the 800 number. I did that, and after several minutes on hold, reached an agent. After going through everything again, and with the rep going on hold several times to "speak to his supervisor", he said it was "beyond his competence". I was eventually told I had to call another FEE-BASED service. I told him that was unacceptable.

Ok, another update and possibly some clues.
I was curious why at one point, when all the computers were in Workgroup2, that "Workgroup" still showed up in Explorer under the list of networks, but only on the two XP machines. Netscan showed this group association as well, which I then realized was the E3000 itself, in its role as a [I]potential[/I] NAS server. However there was no storage device attached.
Could this in itself cause the access error? If so, should users be advised that if they don't plan to host any storage, that they should to go to the E3000 Storage Administration page and change the workgroup name to something other than their actual workgroup name?
In my case, I changed it to "Workgroupx", though perphaps something like "StorageGroup" would be more meaningful, especially if the Workgroup computers could still access any storage I might install in the future.
Anyway, I repeated my original approach (after the above change and a router reboot), and at least got my original Workgroup reestablished to the point where the XP machines not longer get access errors, and most machines can access the shares on the XP desktop. The steps I used on each machine were:
remove any shares I had set up on any folders
uninstalled the File and Printer Sharing service
Accessed Computer Name properties page to change the workgroup name
Shut Down
After all 4 were done, I reversed the process:
Started computer (now coming up in new Workgroup)
Reinstalled File and Printer Sharing service
Checked visibility
At this point, the XP machines could see each other, and the Win7 and Vista machines could see each other, but initially these two cliques wouldn't interact.
Next I re-added the shared folders on the XP desktop, and the XP netbook could see and access them. After about an hour, the Win7 machine joined this clique, and could also access the shares. But six hours later, the Vista machine is still clueless. Netscan shows everything of course, and I used it to set up a mapped drive on the Vista machine to one of the shared folders.
Other possibly relevant facts:
The was all working fine with the BEFRS41/WAP54G combo
I can ping all machines by IP address, but not by name
On the Vista machine I can set up mapped drives to the XP's shared folders, but again, only by IP address.
At one point I removed NWLink from the XP desktop. Now, nbtstat -r only shows the printserver's name being resolved.
The two XP machines, being SP3, lack the LLTD responder.
So,
Is it possible the NetBIOS in NWLink was providing some kind of name caching? If so, should I reinstall the protocol driver (I don't think it is available on Win7)?
Should I request and apply the KB922120 hotfix to get LLTD onto the XP machines?
Perhaps in the morning, "by name" access will have returned, as it did on my first go-round. Needless to say this has been a real pain, what with all the reboots required. At least now I remember to hit F8 so I can select Safe Mode with Networking...

After upgrading to 8.1 Pro from 8.0 Pro, my Storage Spaces and Storage Pool are all gone.

Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces. I had five storage-space drives using this pool I had
been using them for months with no problems. After upgrading to 8.1 ( which gave no errors ) the drives no longer exist. Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
to create a new Pool and Storage Spaces. If I click the "Create Pool" it does not list the three drives I used previously as available to add.
Device Manager shows all three drives as present and OK.
Disk Management shows Disks 0,1,2,6. The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.
Nothing helpful in the event log or the services.
I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery. I've not gone down that road yet though because it requires separate physical drives to copy everything to
and they want $299 for the privilege.
Does anyone have any ideas? I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work. Or possibly going back to 8.0.
Thanks for your help!
Steve

Hi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can you now have multiple Itunes accounts sharing content on one computer?

Hi - I was trying to find this information on line but cannot.
The last "big" Itunes update (11.2?) prevented multiple Itunes accounts from sharing content on one computer. Well, you can, but with consequences. For example, my husband purchased a movie rental with his Itunes account on our computer when he logged on to Itunes, but then I could not download any Itunes content for 30 days when I logged on to my account. I no longer purchase any content from Apple because of this. I was hoping this feature has been discontinued – it prevents households from purchasing Itunes. We never pirate or steal any content at all. In fact, this feature forces us out of the Itunes universe to purchase movie rentals and music elsewhere.
Not just trying to complain, really. Legitimately want to find out if this rights policy still exists before we both try to rent or purchase anything from Itunes.
Thanks.

https://discussions.apple.com/message/24659889#24659889
"Won't it present problems if the daughter needs to reauthorize the computer for her own use before 90 days,"
No. The 90 day limit ONLY applies to redownloading purchases from iTunes..
So if she were to redownload purchases from the father's account then she'd have to wait 90 days to redownload form her own account. and the computer can be authorized for multiple iTunes account (pretty sure it's 5) . You don't need to later reauthorize for first account if you authorize for a different account.
More discussion on 90 day wait period - https://discussions.apple.com/thread/6094005 - disable automatic downloads so message doesn't appear when using multiple accounts.
Most people don't see the "re"

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?

I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?

Yes you can copy the content to your new machine and use Home Sharing to keep the content identical
Connect the two machines via an ethernet cable it is 3 times faster than Wifi. Turn wifi off on one machine to enforce ethernet connection
In System Preferences, Sharing turn on File Sharing
Then
Copy the music/itunes folder from the Macbook pro to the music/ folder on the imac
Both machines should now have the same library
Disconnect H the ethernet cable
Set up Home Sharing and under Settings at the bottom of the Home Sharing page. Select to transfer new purchases.
Do the same on the other machine.
Then when you r machines are connected by wifi and each time you start itunes it will transfer your new purchases
Setting up home sharing

Seeking a document management and file sharing solution for an online client portal

Hi
Late last year our developers created a Member’s Portal for a client’s website (built with WordPress) enabling Members to have a secure area for a discussion forum and crucially, secure
document storage and access, and file-sharing. The WordPress plugin chosen for the Portal was WP-Client.
We have a problem though and I wonder if you or anyone can help?
Basically, the solution was supposed to be like Dropbox or Google Drive but within the Portal but with slight differences. The problem is that the current solution we have isn’t like either
and has various flaws which make it unpopular with most members. It uses free software called kcfinder – see
http://kcfinder.sunhater.com/ as the basis for the file management systems.
So we are seeking to change the file management system. This system must do the following:
It’s got to be intuitive e.g. the action open or download must be ‘typical’ (it is not so in kcfinder you have to right click to download for instance
You must be able open an Office document (especially Word, Excel and Powerpoint) online in situ within the portal. Currently in kcfinder you have to download it.
You must be able to edit it online. Currently you have to download it, open it, edit it, re-upload it and overwrite it.
The client uses Sharepoint (I think that’s part of MS Office 365) and wants to be able to I think drag docs from there straight into the Portal file management system (I think at the moment they have to download a file from Sharepoint to their hard drive
and then upload to kcfinder.
We are currently investigating using a WP plugin for Google Drive
https://wp-glogin.com/drive/ and Google Apps for work to create some sort of file management system that meets the requirements.
However having loaded the plugin, the developer has found that two issues remain that so far defeat us:
Firstly, and this seems to be applicable to using Google Drive outside the portal as well as in it - you can’t edit Word docs online in Google Drive without creating a Google Doc. This means we get duplicate docs which we don’t want – and they’re in
the wrong format. We want Word and no duplication. The members/users don’t have time to delete and change the format back to Word. I guess the same applies to other Office docs.
Second, apparently you can’t create a new folder in Google Drive in the portal.
So my question for this forum is really what can you suggest, either as a fix to the Google Drive solution or is there a totally different plugin or set up we can use? Ideally it should
be Office-based or friendly since most of our users use Microsoft Office.
The other proviso is that it must be affordable. We/client cannot afford the $10 per user per month that some systems charge. The attractiveness of the Google option is not only the wide
use of Google Docs (notwithstanding the fact that you can't open Word in GD instead it creates a duplicate in GD) but the fact that the plugin is cheap.
Thanks in anticipation.

Hi,
Why don't you take a look at Office Web App server which provides browser-based file viewing and editing services for Office files:
https://technet.microsoft.com/en-us/library/jj219435.aspx
It can be integrated with your customized website, and provide the ability to online view/editing Office documents..
Hope it helps.
Aravindhan Battepati

Error while running script HyperV - Dash Board - VM and Storage Report

Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommand

Hi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NAS and storage/sharing content

Similar Messages

Maybe you are looking for