Navigate in long docs using headlines in side panel

I would like to switch from word if it would be possible in Pages to navigate through a long doc clicking headlines in the side panel that then takes you to that place in the doc. Is this possible in Pages??
all the best,
Jorn

Tanx for advice Fruhulda, but the bookmark solution works even better for me.
But it should be such an easy thing for apple to make the option between thumbnails and list of defined words/headlines. It would be so much more neat and simple, especially in full screen mode. But... maybe one day.
Another question that I have just posted is if one can make the autosave versions do more frequent updates. Do u know if that is possible?

Similar Messages

NWBC Side Panel and SAP GUI Scripting

Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Some of our users are getting pop up messages that say "The scripting support is not installed"... interestingly they don't actually appear to be opening a side panel when they get this message.
I noticed that these users don't actually have SAP GUI scripting installed at all, so not that it is just not enabled, it is not installed in these cases. So does the above section from the help documentation mean that SAP GUI scripting must be installed on the client PC but it does not actually have to be enabled?
That's how I am currently reading it... but perhaps someone can clarify for me, or someone else has had a similar experience.
Thanks,
Simon

Hi Simon,
As written in the documentation you quoted:
Simon Kemp wrote:
Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Meaning: SAP GUI Scripting need to be installed on the client PC, although it is not required to activate it:
Regards,
Claudia

How to define Side Panels for linked to Child Window Applications

We are trying to use the NWBC Side Panel with PPM 6.0 in NWBC 3.5. We have a Role that has a menu defined that gives the users a link to the INM_WORKCENTER_APP which displays the current user's Tasks in a table.
When we click on a task in the table it opens the task details using the CPROJECTS_FPM application in a new window. This new window that opens up doesn't have any of the Side Panels that we have defined on the role with the main menu links.
We have tried to add the side panel using different application alias and at different levels in the Role, but can't get a Side Panel to show up on the child window. We even tried to switch the window to open INPLACE in the main window and it still switches to no side panels. The only side panels we are able to see is side panels that the user has manually added under connections and the Data Context Viewer side panels.
Is NWBC capable of having side panels to be defined to be available for these linked to child applications that are called from a main application screen? If so, what is the possible configurations we need to make on the role for this to work properly?
Thanks in advance for any help!

Wanted to close this thread with the solution that worked for us.
We had to change the Launchpad configuration for Role CPROJECTS Instance OIF. We changed the Application from a Web Dynpro ABAP type to Object Based Navigation. Set the Application Parameters Business Object to PROJECT and Operation to DISPLAY.
Then for our role defined in PFGC for our NWBC, we added a new menu item to the Web Dynpro application CPROJECTS_FPM with Configuration CPROJECTS_FPM. Then under Object Based Navigation we set the Object Type to PROJECT and Method to DISPLAY to match what we set above in the Launchpad. Then set the menu item to be invisible since we didn't want it to show to users.
Now when we launch the child window it uses OBN and sees the definition in our role and utilizes the same Side Panel definitions defined for the role.

HT5312 My recovery email is no longer in use, as it hasn't been used for sometime, and now seems to have 'expired', and I do not even recall being asked the security questions,so I can no longer download certain games. Please help.

I cannot download certain games because I do not recall the answers to my security questions when it asks if I am 17 years or older. In fact, I do not even recall being asked these security questions.
I tried to guess logical answers but now my iPad is threatening to lock me out. My second email is no longer in use as it has not been used for years and has seemingly expired.
Can you please help?

If you don't have access to your rescue email account, or you don't have one on your account (an alternate/secondary email address is a different setting/address), then you will need contact iTunes Support or Apple to get the questions reset (you won't be able to change/add a rescue email address until you can answer 2 of your questions)
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to update/add a rescue email address for potential future use

The context has expired and can no longer be used. (Exception from HRESULT: 0×80090317)

I have followed the instructions on this blog. http://blog.cloudshare.com/2012/10/22/how-to-fix-sharepoint-2013-web-application-error-the-context-has-expired-and-can-no-longer-be-used/ and
it fixes the problem for a short time. I have to keep doing IISResets to get my farm backup.
Please Help.

Have you trid Ajay Khanna's suggestion from the comments field?
From Central Admin- Select the web application and Select --> Web Application General Settings --> Navigate to 'Web page Security validation', change or disable the timeout field.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

The context has expired and can no longer be used errors making farm unusable

There are a couple of other posts on this forum about the message "The context has expired and can no longer be used" but they all suggest something related to time and time zone differences. This is not the case in my farm and I have disabled
the security checking of requests on my web applications. Hopefully someone at Microsoft is very aware of this and is working to resolve it because my farm and many others are unusable like this.
I have dug through all of the ULS errors when it happens and there is nothing useful. It barely even registers as a message although, I have not turned on verbose logging, which I am about to try. I have SP 1 installed. Just to be clear, this is happening
on SharePoint 2013 Enterprise.
I have been fighting this for a month. I can add a few things about the farm I am trying to fix:
1. It was a WSS 3.0 farm that when through a 2007-2010-2013 migration in short order.
2. I believe it is under-powered on the hardware side. All VMs on a host shared with 40 other VMs, some fairly busy. Here's the virtual farm breakdown:
-1 WFE with 12GB RAM and 2 cores
-3 app servers with similar resources
-No paging file on C: on any VM. This is a decision by sysadmin. Paging on D: is system managed. Probably irrelevant.
3. Rapidly clicking from link to link seems to bring on the failure much sooner.
Any suggestions even about how to troubleshoot this would be appreciated.

Ultimately, I think it is a time sync issue across the farm. We still have request management off on all boxes because I cannot get the admins to resolve this issue but, in my lab environment I ran into a similar thing.
I may turn RM back on later to see if it comes back but here's what I think happens: In production we have 2 ESXi hosts and our SP environment is all AD (of course). The clocks are all out of sync, sometimes beyond 5 minutes. (The time sync for AD is something
I believe a lot of admins don't understand when running virtual.)
If you allow ESXi to try to sync the time for all guests you run into problems. Maybe they are more pronounced with SharePoint. Anyway, VMware and AD start fighting over the time (check your event logs) and, for us, the clocks across the domain get out of
sync beyond the 5 minute allowable window.
I recommend disabling time sync from host to guest and do what MS recommends: make your domain controller the master time server and configure it to get its time from a reliable source (which can be a single hardware host over NTP). Make other domain controllers
sync from the PDC. The other windows machines will all sync to the domain when they log in. This will prevent SharePoint from issuing tokens from one machine that are out of sync time-wise with the other machines and thus throwing the "Context has expired
and can no longer be used" errors.
Note that disabling host to guest time sync is not as simple as just clearing / un-checking the box in the VSphere client. That doesn't do it. You will need to Google for the 6 or so custom properties you must add to each guest to prevent VMWare from re-synchronizing
after certain hardware events.

Dreamweaver 8 won't display long docs

I update an online catalog and usually start with one very
long HTML document -- nothing fancy, no tags except <P> --
but I've got about 3000 paragraphs of one line each in that
document, which I use to cut and paste updates to other html docs.
The problem is, Dreamweaver 8 won't show me more than the first 600
lines or so of my 3000+ line document; if I continue to scroll the
document after that, all I see is lots and lots of blank/white
space. This wasn't a problem in earlier versions of Dreamweaver,
which would display the entire document just fine. I've encounted
this same problem on a Powerbook G4 with 2 GB of RAM, as well as on
a newer Intel MacBook Pro. Anybody else experience this? Anybody
know a cure? I know all of the document is there -- I can open it
and see every line in a browser. (I suppose I could find and
reinstall Dreamweaver MX, or break down my long doc into five or
six separate ones, but either choice would be a pain at this
point.)

Try setting your zoom setting to 90% and see if that
helps....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"NickatName" <[email protected]> wrote in
message
news:et6kvo$grm$[email protected]..
>I update an online catalog and usually start with one
very long HTML
>document
> -- nothing fancy, no tags except <P> -- but I've
got about 3000 paragraphs
> of
> one line each in that document, which I use to cut and
paste updates to
> other
> html docs. The problem is, Dreamweaver 8 won't show me
more than the first
> 600
> lines or so of my 3000+ line document; if I continue to
scroll the
> document
> after that, all I see is lots and lots of blank/white
space. This wasn't a
> problem in earlier versions of Dreamweaver, which would
display the entire
> document just fine. I've encounted this same problem on
a Powerbook G4
> with 2
> GB of RAM, as well as on a newer Intel MacBook Pro.
Anybody else
> experience
> this? Anybody know a cure? I know all of the document is
there -- I can
> open it
> and see every line in a browser. (I suppose I could find
and reinstall
> Dreamweaver MX, or break down my long doc into five or
six separate ones,
> but
> either choice would be a pain at this point. )
>

How do I navigate a long song quickly?...markers?

Hey there...I'm new to logic express. Just trying to find ways to work quickly.
I understand that logic pro has markers but xpress doesnt...I assume they are used to set up sections for quick navigation.
Can someone tell me the best way to navigate a long composition in logic express?
Is there some way to create sections like intro.verse1.chorus1 and jump quickly from one to the other.
I find it strange that Logic only has 2 sets of locators. It would make sense to me to have as many sets of locators as I want to create and simply have a key command to to jump to any particular set I choose.
Any help would be appreciated.

Hey there...I'm new to logic express. Just trying to
find ways to work quickly.
I understand that logic pro has markers but xpress
doesnt...I assume they are used to set up sections
for quick navigation.
Can someone tell me the best way to navigate a long
composition in logic express?
Is there some way to create sections like
intro.verse1.chorus1 and jump quickly from one to the
other.
I find it strange that Logic only has 2 sets of
locators. It would make sense to me to have as many
sets of locators as I want to create and simply have
a key command to to jump to any particular set I
choose.
Any help would be appreciated.
The original LE 7 didn't have marker capability IIRC.
logic express 7.1.1 does have markers, and you can name the markers. You can shrink the width of the tracks screen to get a comprehensive view of your piece and click to the marker you want quickly.
If you're on 7.2, I can't address it because I don't have my copy yet. Hopefully they didn't remove the markers again....

Help! I have forgotten my apply id password and I cant reset this because the email address I have used as my apple id is no longer in use!

I am trying to reset my apple id password but unfortunately when I first purchased the phone I used an email address that is no longer in use. Help how can I reset my password I have forgotten with out having to pay £25 to talk to apple support?? Thanks in advance

Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

I want to delete my iCloud account as I have created new Apple id. But it is not allowing me to delete the previous account as it in no longer in use. I m using IOS 8.2. My new Apple id and alternate email address is verified. Plz help I m stuck.

how can I delete my previous iCloud email address. It is no longer in use. I have created new Apple id. And it is verified but I cannot merge it with iCloud Since it is asking me to type password.

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can I navigate through tabs without using the mouse?

I want to know how to navigate through tabs without using a mouse... just like you can navigate through multiple windows by using <alt><tab> ... because it's extremely annoying when I'm working on something to have to take my hands off the keyboard and go to the mouse.

You can also use Ctrl + Page Up and Ctrl + Page Down to go to the next and previous tab. I prefer those because it doesn't require the Shift key (Shift + Ctrl+ Tab) to go to the previous tab.
See also [[Tabbed browsing]]

Navigate in long docs using headlines in side panel

Similar Messages

Maybe you are looking for