Navigating to multiple reports from stacked bar chart

Hi,
I have a stacked bar chart which consist of two fact's A & B. Now i want to navigate to report 1 when i click portion of stacked bar that is created by fact A and i want to navigate to report 2 when i click portion of stacked bar that is created by fact B. How can i achieve it in OBIEE?
The other solution can be that when i click either portion of stacked bar i navigate to a same report but in that report i have defined filters to filter out results to show data like report 1 when A portion is clicked and to show data like report 2 when B portion is clicked. But what filter should i use in this case and what will be the filter values?
Thanks.
Aasim Khan

The second option worked for me. I am navigating to a same report but i am using a filter to filter out un-required data.
1. I created a new column in RPD at logical level and set its value that whether this row is for fact A or B.
2.Then in the chart i check the column against the third column of check boxes where we select fields against we want to create the graph.
3. In the interaction tab i selected the report to which i want to navigate.
4. Then in the report in included this newly created column and apply "is prompted" filter. Now when i clicked fact A of stack bar i only saw data against fact A and when i clicked fact B it only shows data for fact B.
Thanks.
Aasim Khan

Similar Messages

Crystal Report Version 11.5.8.826 - Color Sorting - Stacked Bar Chart Issue

Hi All,
I have issue on sorting the color on stacked bar chart.
Below steps are not reflect the color sorting.
1. Right click on chart area in the report
2. Select chart expert
3. Go to Color Highlight tab
4. In the item list, change the sequence of color
Is there any way to sort the color on stacked bar chart?
Please advise, thank you.
Regards, Sumardi

hi,
You can right click on each bar individually,
Format Series Riser -> Fill -> Foreground Color.
This will apply the required colors.
Also, if you have any color standards, try to create a sample report with this kind of Chart and specify the colors individually.
Right Click the chart -> Save as Template.
In future, if any other reports have Stacked Bar Chart with same color standards, you can directly re-use this template.
Regards,
Vamsee

Stacked Bar chart mouseover options

I am using the stacked bar chart. When mousing over the bars, it currently displays the totals on the very top of the bar. Is there a way to make the total display inside (or at the bottom) of the bar?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked bar chart errors

I am creating a stacked bar chart and put a max row count of 50, but the graph actually shows more than 50. After the 50 data points, all of the rest of the dates along the x axis are out of order. Is there another location i also need to enforce this max row count?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked Bar chart does not overlap series

I have a stacked bar chart with to values "Invoiced" and "Budget" and 2 categories YEAR and MONTH - the problem is that the bar chart shows the values Invoiced and Budget in Top of each other and Not overlapping each other . ex:
NOW: Invoiced = 200 Budget = 300 - Bar chart shows a column of 500 for the month (NOT correct)
What I want is to show 1 column for each month where up to 200 the colour is green and from 200 to 300 the colour is blue for example....
How to achieve this ?

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

BAM-Stacked bar chart

hi,
how to set Stacked bar chart horizontally instead of vertically(by default).

Hi HCMJ,
By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
Create a dataset with the query below (sample data):
CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
INSERT INTO #temp VALUES ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
SELECT * FROM #temp
Insert time field to Category Groups pane, and change the group name to “time”.
Insert value field to Values pane, then change the value to like below:
=min(Fields!value.Value,"time")
Insert another field with the following expression to Values pane:
=max(Fields!value.Value,"time")
Change the type of chart from Stacked Bar Chart to Range Bar Chart.
Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
Preview it and get the following result:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stacked Bar Chart with Multiple Series Sort Question

Hi,
Apex version 4.1.1
I have a stacked bar chart with three separate series, one showing customer effort, another showing project effort and the third showing other effort, summarized by calendar week. The x-axis of the chart is the calendar "week of" date, and the y-axis has a bar for each of the three series. Not every type of effort occurs every week.
When AnyChart renders the chart, the order of entries on the x-axis seems to be dependent both on which series are present in a given week as well as the "week of" date. Weeks with all three series sort in order by calendar date, followed by weeks where just the 2nd & 3rd series are present, followed by weeks where just the 3rd series is present. See this [url http://tinypic.com/r/b9zdt/6] picture of the chart noting the "week of" dates. Note that the months go Sep-Oct-Nov-Aug-Oct.
Is there a way to force AnyChart to sort the x-axis in chronological order regardless of whether there is data for all three series for a given week? I have looked through the AnyChart XML reference but cannot find a way to do this.
Incidentally, I can solve the sorting problem by combining all three series into a single query:
select
null as link,
week_of as label,
sum(customer_effort) as "Customer Effort",
sum(project_effort) as "Project Effort",
sum(other_effort) as "Training, Admin and Other Effort"
from ...But if I do this, I cannot figure out how to have each bar on a given week link to a different detail page, e.g., if I click on a bar representing customer effort I want to link to one page, but if I click on a bar representing project effort, I want to link to a different page. I have had a look at the [url http://apex.oracle.com/pls/apex/f?p=36648:59:1570983160946101::NO:::] chart examples posted on apex.oracle.com, but cannot figure out how to apply to multiple series in a single query.
Thanks,
Mike

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Stacked Bar Chart with data from a Web Service

Hi,
I'm working on Dashboard Design (version 14.0.1.287) and I'm trying to create a chart linked to data from a webservice.
With a Year in input, my webservice gives an Amount per Cities and Products
Data retrieved look like this (Sheet1) :
Paris          Tablets          45
Paris          Laptops          12
Paris          Cellulars          89
New-York     Tablets          56
New-York     Laptops          36
New-York     Cellulars          1
Londres          Tablets          150
Londres          Laptops          3
Londres          Cellulars          45
Then I use a Pivot Table (created manually in Excel) looking like this (Sheet2) :
               Tablets     Laptops     Cellulars
Paris          45          12          89
New-York     56          36          1
Londres          150          3          45
The chart is a Stacked Bar Chart plugged on the previous Pivot Table
I create 3 series (one per Product), values (X) are set with Amount
Category labels (Y) are set with Cities
The goal is to have a dynamic chart (series and categories must update if a new city or a new product appears)
So my question is : how can I set up the chart directly with data retrieved from webservice on Sheet1?
Thx a lot !
Nicolas
Edited by: nicolasheurtevin on Sep 14, 2011 4:58 PM

hi
First thing , bad news if you are using .Net framework 1,
just forget it, Flex 2 doesn't work well with framework 1, but 2nd,
good news, if you want to use webservices, you'll have to make an
array of objects on .Net Side and send it as objects to flex, i saw
an example on the net but i can't seem to remember where, on the
other hand,if you want to simply use, like i do, HTTPSERVICE its a
very nice way to talk with .Net and you can see my example here
http://flex1-for-dummies.blogspot.com
By the way, in your code, you have a request tag , but you
aren't requesting anything, because if you were you would have to
make like this
<mx:request>
<Artist>{yourinputtext.text}</Artist>
</mx:request>
So if you don't have an input text, you don't need a request
tag, only the operation.

How to combine a stacked bar chart and a line graph together in one report

I have a report in excel that has stacked bar chart and a line graph together in one report. I am trying to recreate the same in Webi, Is this possible? Did any one have similar requirement, could you please share the thoughts?
Thanks,
Hema

May be I don't understand correctly...
But if its really to separate chart area's;
just copy the datablock and format one as line and the other as barchart...
Hope this helps,
Marianne

Stacked Bar Chart

Hi I would like to create a stacked bar chart in my report.
It will have 2 dimensions and 1 Measure.
Dimension 1 = Month
Dimension 2 = Sales Item
Measure = Sales_quantity
I can't find anything in the user guide.
Is this possible ?

I am not sure what you understand as a "stacked bar chart" - There is a chart type "stacked bar chart" that we support. So you can have the Month as the x axis and the Sale Item as the different data sets.
We are using the Oracle BI Beans XML description for our charts. The BI Beans chart builder helps to define the tags - that is stored in the Web Alternate Text of the Image that is included by the chart builder.
The tag for the graph type is:
<Graph graphType="BAR_VERT_STACK"/>
To show 2 dimensions you need to modify the code the following way
1) Adjust the row count
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'MONTH'))}" rowCount="{count(xdoxslt:group(.//ROW, 'SALESITEM'))}">
2) Show the labels
<RowLabels>
<xsl:for-each-group select=".//ROW" group-by="SALESITEM">
<Label><xsl:value-of select="./SALESITEM"/></Label>
</xsl:for-each-group>
</RowLabels>
3) Add multiple rows for the SALESITEM in each column (MONTH) in the data section.
<DataValues>
<xsl:for-each-group select=".//ROW" group-by="MONTH">
<RowData>
<xsl:for-each-group select="current-group()" group-by="SALESITEM">
<Cell><xsl:value-of select="sum(current-group()/Sales_quantity)"/></Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
The code stehms from an example I did recently for multiple line charts - so I made have some typos in there - from changing hte names. Hope it helps and you get it working.
We should support the stacked bar charts in the builder, but it is only recently that
people cared about the charts...
Good luck,
Klaus

Stacked bar chart with single group

Post Author: rt50896
CA Forum: Charts and Graphs
Dear all,   I have a question about stacked bar chart with one group value(normally more than one group value is ok)   ex. YYYYMM      PRODUCT    AMT        -
        200601          ABC            1000        200602          ABC              300        200603          ABC              500       .....   the data collection is as above,then chart display: x-axis as YYYYMM,y-axis as PRODUCT...   but why this case the bar chart color not the same for each YYYYMM? and legend not display one PRODUCT as ABC only?   the bar chart display like this:   http://tkfiles.storage.live.com/y1po30C7CH6eW9phoLAXH89MBGwFLYdEZ3kOMQXUQzDzwM-VNnffibEwqPI8TIUNBm1f7uKTjnkaOI   ps. crystal report version is 8.5Regina

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Stacked bar chart/line chart combination

Hi,
I use Crystal Reports 10.I need to produce a chart containing 2 series on the same graph with:
- one series as a stacked bar chart type,
- one series as a line chart type (not stacked).
I tried doing 2 separate charts and superimposing one over the other, but the user wants to export it to excel and when they do so, the graphs appear as 2 separate images rather than one. it appears correctly in pdf though.
How can i achieve this, either in 1 graph or as separate 2 graphs ?
Any help appreciated...
Thanks in advance,
Swathy.

Hello Swathy,
If you can get both series in one chart then you can convert one series into line.
To do this right click on the Bar that you want to display as line.Select the series option and then select "Line" from the drop down of "Show Selected Series as:" option.
Hope this will help!
Thanks & Regards,
Amrita

Stacked Bar Chart - Hiding legends with 0 values

I'm using Crystal Reports 2008, building a report that will eventaully be called from an ASP.NET page.
I've built a stacked bar chart that is displaying values per month of the number of various vehicle types. The X values are the months, the Y values are the number of each vehicle type and the stacked series are each different vehicle type. However, depending on the months that the user asks for, there may be some vehicle types that do not have any data, thus the number is 0. Is there a way for the report to see that there is 0 data for this vehicle type and thus not include it in the legend of the various vehicle types?
First time poster, so hopefully I explained everything well enough. I searched the forums for anything matching Stacked Bar Chart and did not find anything. I don't know how to find/query SAPNotes.
Thanks.

Thanks for the response, but I'm not familar with Alters? Could you describe a bit more? I didn't see anything in the documentation about it.

Stacked Bar chart and Line graphs

I have a report in Crystal which has stacked bar chart and a line graph together in one report.
Is it possible to do the same thing in WebI . Can anybody share the experience.

Today you can only have a simple bar (not stacked) and line chart in Web Intelligence. We are looking to improve charts in the future. In the meantime you can look into the masher from the labs...

Jfreecharts- stacked bar chart query

Hi all,
I am using JfreeCharts for building an application which reports the usage metrics of two servers over a period of time.
Each server does a number of operations which can be broadly grouped under 6 heads and these broad divisions are being used for reporting.
When I use Stacked bar chart for creating the bar graph image, the order in which the bars get displayed is wierd. The dates start from 25th Feb to 28th Feb. Hence I am expecting the bars for the data from the dates 25th... 26th...27th and 28th; but the bars that come up are the 25th ... 26th... 28th and the 27th... Is there a group utility which can be used to order the grouping??? I am posting my code used for grouping the data.
map = new KeyToGroupMap("G1");
renderer = new GroupedStackedBarRenderer();
for (int i = 0; i < (metricsList2[0].size()); i++)
map.mapKeyToGroup(((XxccrCropsdbColourgrp)(metricsList2[0]).get(i)).getAttributeName1(), ((XxccrCropsdbColourgrp) (metricsList2[0]).get(i)).getAttributeName2());
renderer.setSeriesToGroupMap(map);
From the database the groups being sent are G1,G2,G3 and G4 which correspond to the 4 dates mentioned above.
Help will be highly appreciated....
Madhu

The actual problem is when I am adding data to the map for the grouping , the data is getting jumbled up... The groups which are added to the map are not added in order.

Navigating to multiple reports from stacked bar chart

Similar Messages

Maybe you are looking for